Used Extruders in Illinois, USA

WERNER & PFLEIDERER ZSK20 TWIN 17702

• Manufacturer: WP

Werner & Pfleiderer Model ZSK20 20mm co-rotating twin screw extruder. S/N 02-3108-1000-010-1, Has 40:1 L/D barrel at a 43″ center line driven through a 3:1 gearbox with a 37 newton meter torque capacity per screw...

DAVIS STANDARD 4.5″ 30:1 L/D 18937

• Manufacturer: Davis-Standard

One (1) used Davis Standard model 45IN45 extruder. S/N M3316. Shop order 05432. Extruder has 30:1 L/D ratio with a six (6) zone electrically heated, air cooled, and non-vented barrel at a 42″ center-line. Gearbox...

DAVIS STANDARD 4.5″ 30:1 L/D 18936

• Manufacturer: Davis-Standard

One (1) used Davis Standard model 45IN45 extruder. S/N M3315. Shop order 05432. Extruder has 30:1 L/D ratio with a six (6) zone electrically heated, air cooled, and non-vented barrel at a 42″ center-line. Gearbox...

DAVIS STANDARD 130mm 32:1 L/D 18933

• Manufacturer: Davis-Standard

One (1) used Davis Standard 130 mm (5.1″) model 130IN45HT extruder. S/N 14844. Shop order 70693. Extruder has 32:1 L/D ratio with a seven (7) zone electrically heated, air cooled, and non-vented barrel at a 42″ c...

DAVIS STANDARD 3.5″ SINGLE STAGE 12024

• Manufacturer: Davis-Standard

Davis Standard 3.5″ single stage extruder screw. Approximately 24:1 L/D with five mixing pin sections.

EGAN 3.5″ 32:1 L/D 150 17807

• Manufacturer: Egan

One (1) used 3.5″ 32:1 L/D Egan extruder having an electrically heated, water cooled (closed loop), top vented, and plugged barrel at an approximate 52″ center line height. Philadelphia gearbox has a reduction ra...

WELEX 6″ 36:1 L/D 500 18830

• Manufacturer: Welex

One (1) used Welex model 6.0 36D 6″ 36:1 L/D extruder. S/N 6492. Having an electrically heated, water cooled (closed loop), and vented barrel at an approximate 66″ center line height. Koellman model Unex 8.13 gea...

UNK MFG 4.5″ SINGLE SCREW 12403

Unk Mfg. 4.5″ single screw extruder barrel, non-vented, 24:1 L/D, 13″ OD, 8 bolt flange mount. Threaded end to accept screen changer. 102″ overall length.

DAVIS STANDARD 130mm 32:1 L/D 18935

• Manufacturer: Davis-Standard

One (1) used Davis Standard 130mm (5.1″) model 130IN45HT extruder. S/N U7644. Shop order 58491. Extruder has 32:1 L/D ratio with a seven (7) zone electrically heated, air cooled, and non-vented barrel at a 42″ ce...

GLOUCESTER 4.5″ 30:1 250 HP 18227

One (1) used Gloucester model 244-001 4.5″ 30:1 L/D extruder having an electrically heated, air cooled, and non-vented barrel at an approximate 56″ center line height. Cool Touch heaters with integral blowers wer...

DAVIS STANDARD 10″ 38:1 L/D 18953

• Manufacturer: Davis-Standard

Used Davis Standard Model 100TH100D 10″ 38:1 L/D extruder. Having a eight (8) zone electrically, heated, water cooled and non-vented barrel at a nominal 44″ center-line. S/N L3201. Shop Order 03643. Gearbox has a...

NRM/DAVIS STANDARD 3.5PMIV RH/WC VTD/PLGO 12733

• Manufacturer: Davis-Standard

NRM / Davis Standard model 3.5PMIV RH/WC VTD/PLGO, 3.5″ extruder, S/N 19222. 24:1 L/D water cooled 7 zone vented and plugged barrel. Approximately 100-150HP DC motor into a belt driven 15.12:1 gearbox with a 1.25...