Used Extruders in Illinois, USA

STEER ENGINEERING 12mm TWIN SCREW 16620

Steer Engineering Pharmaceutical twin-screw extruder, S/N EA00427. Model Omicron 12P new in 2014. Screw diameter is 12mm diameter ratio (do/di) is 1.45 flight depth is 1.9 max screw speed is 900 RPM 2HP drive, 48...

DAVIS STANDARD 130mm 32:1 L/D 18935

• Manufacturer: Davis-Standard

One (1) used Davis Standard 130mm (5.1″) model 130IN45HT extruder. S/N U7644. Shop order 58491. Extruder has 32:1 L/D ratio with a seven (7) zone electrically heated, air cooled, and non-vented barrel at a 42″ ce...

GLOUCESTER 4.5″ 30:1 250 HP 18227

One (1) used Gloucester model 244-001 4.5″ 30:1 L/D extruder having an electrically heated, air cooled, and non-vented barrel at an approximate 56″ center line height. Cool Touch heaters with integral blowers wer...

DAVIS STANDARD 10″ 38:1 L/D 18953

• Manufacturer: Davis-Standard

Used Davis Standard Model 100TH100D 10″ 38:1 L/D extruder. Having a eight (8) zone electrically, heated, water cooled and non-vented barrel at a nominal 44″ center-line. S/N L3201. Shop Order 03643. Gearbox has a...

WELEX 3.5″ 30:1 L/D 100 17579

• Manufacturer: Welex

One (1) used 3.5″ 30:1 L/D Welex Model 350-2-1984-RHNV extruder having an electrically heated water cooled (closed loop) non-vented barrel at a 54″ center line height. Koellmann gearbox has a reduction ratio of 1...

NRM PACEMAKER III 3.5″ 32:1 18061

One (1) used NRM PM III 3.5″ 32:1 L/D extruder having a five (5) zone electrically heated, air cooled, and non-vented barrel at an approximate 42″ center line height. Gearbox has a reduction ratio of 17.42:1 and ...

NRM/DAVIS STANDARD 3.5PMIV RH/WC VTD/PLGO 12733

• Manufacturer: Davis-Standard

NRM / Davis Standard model 3.5PMIV RH/WC VTD/PLGO, 3.5″ extruder, S/N 19222. 24:1 L/D water cooled 7 zone vented and plugged barrel. Approximately 100-150HP DC motor into a belt driven 15.12:1 gearbox with a 1.25...

DAVIS STANDARD 4.5″ 24:1 L/D 19040

• Manufacturer: Davis-Standard

Davis standard model 45IN45 4.5″ extruder. S/N V3255. 24:1 L/D air cooled and non-vented barrel at a center line of 42″. Driven by a Marathon Blue Max 250 HP 460-volt A/C motor thru 17.49:1 304 HP capacity gearbo...

EGAN 6″ 30:1 L/D 400 18037

• Manufacturer: Egan

One (1) used Egan 6″ 30:1 L/D extruder. S/N 37910. Having an electrically heated, water cooled (closed loop), and vented barrel at an approximate a 42” center line height. Water system is incomplete. Philadelphi...

DAVIS STANDARD 3.5″ 34:1 L/D 17735

• Manufacturer: Davis-Standard

One (1) Used Davis Standard model 35IN35SR 3.5″ extruder, S/N K2191. 34:1 L/D barrel having a seven zone electrically heated and water cooled (closed loop) barrel at a 56″ centerline height. Gearbox has a 5.67:1 ...

DAVIS STANDARD 3.5″ 30:1 75 18867

• Manufacturer: Davis-Standard

One (1) used Davis Standard model 35IN35 extruder. S/N M3922. Shop order 05580. Extruder has 30:1 L/D ratio with a six (6) zone electrically heated, air cooled, and vented barrel at a 42″ center-line. Gearbox has...

DAVIS STANDARD 8″ 900 HP 18828

• Manufacturer: Davis-Standard

Used Davis Standard Model 80IN80HT 8″ 32:1 L/D extruder having a seven (7) zone electrically, heated, water cooled (closed loop), and vented barrel at a 44″ center-line. S/N AA454. Shop Order 72635. Gearbox has a...

DAVIS STANDARD 3.5″ SINGLE STAGE 12028

• Manufacturer: Davis-Standard

Davis Standard 3.5″ chrome plated single stage extruder screw. Approximately 24:1 L/D. Four rows of mixing pins.

DAVIS STANDARD 4.5″ 30:1 L/D 18589

• Manufacturer: Davis-Standard

One (1) used Davis Standard model 45IN45CT extruder. S/N P5568. Shop order 53447. Extruder has 30:1 L/D ratio with a six (6) zone electrically, heated air cooled, and non-vented barrel at a 42″ centerline. Water ...

TWO STAGE 4.5″ CHROME PLATED 12019

4.5″ chrome plated two stage extruder screw with mixing pins at the end of first stage. Approximately 28:1 L/D single key shaft. Unknown manufacturer.