Used Extruders in Illinois, USA

DAVIS STANDARD 1.5″ 34:1 L/D 17542

• Manufacturer: Davis-Standard
• Model: Thermatic

one (1) used Davis Standard model Thermatic 150 1.5″ extruder, S/N 62570, 34:1 L/D barrel having a five (5) zone electrically heated, air cooled, and non-vented barrel at approximately a 42? centerline height. Ge...

DAVIS STANDARD 1.5″ 20:1 L/D 17504

• Manufacturer: Davis-Standard

One (1) used 1.5″ 20:1 L/D ratio Davis Standard rubber extruder with powered feed roll on throat. Barrel is electrically heated, water cooled (closed loop) and vented at approximately a 42″ centerline height. Inc...

DAVIS STANDARD 1/4″ TUBING EXTRUSION 17437

• Manufacturer: Davis-Standard

Davis Standard 1/4″ tubing extrusion line including the following equipment:A. Davis Standard / Killion model KN-100 1.00″ 24:1 L/D extruder having a three (3) zone electrically heated, air cooled non-vented barr...

GLOUCESTER 2.5″ 24:1 L/D 60 18350

One (1) Used Gloucester model 25225R2 2.5″ 24:1 extruder having an electrically heated, air cooled, and non-vented barrel at approximately a 65″ center line height. S/N 36736/19. Barrel is set up for Contra-Cool ...

DAVIS STANDARD 75mm 32:1 L/D 18831

• Manufacturer: Davis-Standard

One (1) Used Davis Standard 75mm (2.95″) 32:1 L/D Model DSPW 75IN25 single screw extruder. S/N 72635. SO 80076. Barrel is six (6) zone electrically heated, water cooled(closed loop), and non-vented barrel at a 48...

A&G EXTRUSION 30MM 3 HP 18677

• Manufacturer: A&G Mercury

One (1) used A & G Extrusion Model CE-30 30mm pedestal extruder. S/N 1380. Having a 20:1 L/D ratio. Unit has an electrically heated and non-vented barrel. Single blower on last zone of the barrel. Benzlers gearbo...

NRM / DAVIS STANDARD 1.5″ 16125

• Manufacturer: Davis-Standard

NRM / Davis Standard 1.5″ Pacemaker IV extruder, S/N 19218, S/O 52660. 24:1 L/D air cooled electrically heated barrel with a 42″ to 44-3/4″ adjustable centerline. Driven by a 10 HP 1750/2300 RPM DC motor with Rel...

KILLION / WAYNE 1″ LAB 18656

One (1) used laboratory sheet line consisting of the following:Killion model KL-100 1″ 24:1 extruder. S/N 12809. Unit has a three (3) zone electrically heated, air cooled, top vented, and plugged barrel at a 42″ ...

DAVIS STANDARD 3.5″ DOUBLE SPIRAL 12398

• Manufacturer: Davis-Standard

Davis Standard 3.5″ double spiral screw 32:1 L/D, 136″ overall length 12″ shank.Three are available.

4.5″ TO 3.5″ CO-EX BLOCK 12342

One (1) used co-ex block. Main entrance was last used on a 4.5″ HPM extruder. Single co-ex entrance was last used on a 3.5″ extruder. Electrically heated. Includes adapter to sheet die.

MELT PUMP SHV350-8A 12728

Melt pump model SHV350-8A, S/N 95226034-00001000. 15HP 500 volt 1,750 RPM DC motor. True 20:1 gearbox rated at up to 5.85HP maximum. Last used on a 3.5″ extruder.

EDI / NORDSON 56″ SHEET 18833

• Manufacturer: EDI

One (1) used Nordson/ Extrusion Dies Inc Model Ultraflex HRMC-100 heavy duty sheet die with a 56″ slot opening. Integral upper flexible lip and fixed removable lower lip. Adjusting bolts on 1″ centers. 45-degree ...

DYNISCO 60 HP MELT PUMP 18829

• Manufacturer: Dynisco

One used Dynisco model MSDP-430 melt pump. S/N M54343035. last used with 8″ 900 HP extruder. Includes 60 HP 480-VOLT Blue Max A/C inverter duty motor, gearbox, stand, and static mixer

PARKER HANNIFIN/ZENITH MFG 5 HP 12582

• Manufacturer: Parker Hannifin

Parker Hannifin / Zenith Manufacturing 5HP melt pump model 60-20000-1550-4. Manufactured 4-23-99. Mounted on a stand. Five (5) zone heater controls. Last used on a 3.5″ extruder. 5HP 230/460-Volt 1,755 RPM motor....

EXTEK HSC-35 3.5″ SCREEN CHANGER 18361

One (1) used Extek model EH-35 screen changer having two (2) nominal 3.5″ breaker plates. S/N EH35161. Set up for use on a 3.5″ Gloucester extruder. Cleaned, evaluated, and repaired by Xalloy in 10/2011 and never...