Processing » Hamburg

Search By Category

Search By Manufacturer

Building Filters

500

Used Processing in Hamburg, Germany

  • 1992 Pedrini M 580 GR-

    1992 Pedrini M 580 GR-

    • Manufacturer: Pedrini

    Block cutter - SCALETTA Motor, rated power – 190 kW. 32 vertical discs (cutting thickness 12 mm) Min. disc, d: 1000 mm Max. disc, d: 1600 mm Shaft D: 110 mm; shaft length: 600 mm Diameter of the horizontal disc –...

    Hamburg, Germany
  • 1995 Pedrini M 580 GR-

    1995 Pedrini M 580 GR-

    • Manufacturer: Pedrini

    Block cutter - SCALETTA Motor, rated power – 190 kW. 32 vertical discs (cutting thickness 12 mm) Min. disc, d: 1000 mm Max. disc, d: 1600 mm Shaft D: 110 mm; shaft length: 600 mm Diameter of the horizontal disc –...

    Hamburg, Germany
  • 2009 BARSANTI -

    2009 BARSANTI -

    • Manufacturer: Barsanti

    BLOCK CUTTER Saw blade 1,600 Complete with trolley for blocks Voltage V. 380 Hz 50 More used machines at: www.janssen-usedmachines.com New stone processing machines: www.janssen-steintechnik.de

    Hamburg, Germany
  • 2000 Pellegrini TDI 55 Super

    2000 Pellegrini TDI 55 Super

    • Manufacturer: Pellegrini

    Wire saw for stone mining Inverter for wire rotation and inverter for traction Operating hours approx. 4,596 More used machines at: www.janssen-usedmachines.com New stone processing machines: www.janssen-steintec...

    Hamburg, Germany
  • 2002 BARSANTI TD 40 L

    2002 BARSANTI TD 40 L

    • Manufacturer: Barsanti

    Reconditioned gang saw 50 saw blades Voltage: 380 volts 50 Hz More used machines at: www.janssen-usedmachines.com New stone processing machines: www.janssen-steintechnik.de

    Hamburg, Germany
  • 2011 CMPI GP100-

    2011 CMPI GP100-

    • Manufacturer: CMPI

    Edge polishing machine Spindles: 7 Bevels: 2+2 From left to right Accessories: drip nose, saw cutter More used machines at: www.janssen-usedmachines.com New stone processing machines: www.janssen-steintechnik.de

    Hamburg, Germany
  • 1993 MVZ Falkenstein KS III

    1993 MVZ Falkenstein KS III 1500-

    • Manufacturer: MVZ Falkenstein

    Contour wire saw Motor power 3.1 KW Including all wires and a press for pressing broken wires More used machines at: www.janssen-usedmachines.com New stone processing machines: www.janssen-steintechnik.de

    Hamburg, Germany
  • 1968 Speckhardt FAMA-

    1968 Speckhardt FAMA-

    • Manufacturer: Speckhardt

    Speckhardt saw Saw blade 80 cm from Winter Rotating table can be controlled electrically but also manually More used machines at: www.janssen-usedmachines.com New stone processing machines: www.janssen-steintechn...

    Hamburg, Germany
  • 2007 Intermac MASTER 23 M

    2007 Intermac MASTER 23 M ( marble )

    • Manufacturer: Intermac
    • Model: Master 23

    3-axis CNC machining center Including multiple suction cups and cones Machine bed size: 2500 x 1200 mm Z-axis: 275 mm Machine dimensions: L: 4700 mm W: 2680 mm, H: 2680 mm Electric spindle: 9.2 kW Max. electric s...

    Hamburg, Germany
  • 2008 Guglielmi 150 VNT.HV.SH-

    2008 Guglielmi 150 VNT.HV.SH-

    • Manufacturer: Guglielmi

    Horizontal splitting machine Width max. material: 440 mm, Working direction: From right to left, Number of spindles: 4, Disc diameter: 625 mm, Working thickness: From 20 mm to 80 mm. Drive spindles: 15 Kw Automat...

    Hamburg, Germany
  • 1989 Arbes STH 140-25-

    1989 Arbes STH 140-25-

    • Manufacturer: Arbes

    Gang saw Maximum block size is 3000 x 1800 mm Maximum 26 blades Push rod stroke 750 mm Main motor has 55 kW and operates at approximately 65 strokes per minute. Lowering speeds range from 0 to 300 mm per hour. Wa...

    Hamburg, Germany
  • 2002 Marmo Meccanica LTH 7212-

    2002 Marmo Meccanica LTH 7212-

    • Manufacturer: Marmo Meccanica
    • Model: LTH 7212

    Edge polisher machine for straight and round edges Calibrator / water nose Chamfers inclined at 45° (diameter 120-130 mm) 7 polishing heads Additional lower chamfer inclined at 45° (diameter 120-130 mm) 2 rollers...

    Hamburg, Germany
  • 2009 BRETON Countourbreton NC 260

    2009 BRETON Countourbreton NC 260 K 23-

    • Manufacturer: Breton
    • Model: NC260

    CNC machining center 1-24 a new spindle was installed Tool magazine: 26 positions Steep taper, angle gear with saw blade and vacuum suction cup are supplied with the machine The machine is supplied with a 2nd ful...

    Hamburg, Germany
  • 1998 BRETON LEVIBRETON KG

    1998 BRETON LEVIBRETON KG

    • Manufacturer: Breton

    Refurbished polishing line for marble and granite slabs Marble and granite heads Complete with tilting loading and unloading trolley Roller conveyors More used machines at: www.janssen-usedmachines.com New stone ...

    Hamburg, Germany
  • 2009 TERZAGO Omega-

    2009 TERZAGO Omega-

    • Manufacturer: Terzago
    • Model: Omega

    Bridge saw L = 6100 mm W = 6100 mm H = 2850 mm Area 3000 x 1800 mm More used machines at: www.janssen-usedmachines.com New stone processing machines: www.janssen-steintechnik.de

    Hamburg, Germany
2122232425

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.