Processing » Hamburg

Search By Category

Search By Manufacturer

Building Filters

500

Used Processing in Hamburg, Germany

  • 2011 BRETON SMART-CUT S/NC 800

    2011 BRETON SMART-CUT S/NC 800

    • Manufacturer: Breton
    • Model: Smart Cut

    Bridge saw with interpolating axes. Rotating head and fixed work table. Suction cup pick-and-place system. Latest generation SIEMENS NC. Rotating head with ± 190° rotation around axis "C" and 0° to 90° rotation a...

    Hamburg, Germany
  • 2002 SIMEC NT2/2M-

    2002 SIMEC NT2/2M-

    • Manufacturer: Simec

    Block Cutter Maximum input block size: 2,300 x 3,400 x 2,100 mm Maximum number of vertical saws: 2 Maximum vertical saw blade diameter: 1,700 mm Minimum vertical saw blade diameter: 1,000 mm Maximum horizontal sa...

    Hamburg, Germany
  • PELLEGRINI DF2500-

    PELLEGRINI DF2500-

    • Manufacturer: Pellegrini
    • Model: DF2500

    Wire saw - Refurbished with 6 months warranty. Installation and training can be carried out at extra cost. - Diameter of drive wheels 2500 mm - Maximum dimensions of the block 4.0 x 2.4 m - Motorized block carria...

    Hamburg, Germany
  • 2010 MBD Lace 229/2-

    2010 MBD Lace 229/2-

    • Manufacturer: Janssen Steintechnik

    Calibration machine for slabs 2 calibration units Diamond tools per head: 24 Diamond tool width: 12 mm Rated power: 101 kW Voltage: 400 V – 50 Hz Usable working width: 300 mm – 2,100 mm Usable working thickness: ...

    Hamburg, Germany
  • 2020 Omag Area Cut-

    2020 Omag Area Cut-

    • Manufacturer: Omag

    5-axis CNC bridge saw with 5-axis head 100 hours of operation (as new) Siemens CNC control 1 vacuum cleaner for separating the workpieces is located behind the head R 1/2" connection in the motor shaft Max. saw b...

    Hamburg, Germany
  • 2017 INTERMAC Master 45-

    2017 INTERMAC Master 45-

    • Manufacturer: Intermac
    • Model: Master 45

    5-Axis CNC Machining Center Operating Hours: 3,568 Maximum Dimensions: 4,060 x 2,300 mm PC-controlled 5-axis machining center for milling, drilling, grinding, polishing, beveling, and engraving marble, stone, and...

    Hamburg, Germany
  • 2002 Comandulli EDILUX 8+4 DX-

    2002 Comandulli EDILUX 8+4 DX-

    • Manufacturer: Comandulli
    • Model: Edilux

    Edge polishing machine for marble and granite straight edge working direction from right to left 8 heads, 4 bevels plate thickness min. 20 mm, max. 100 mm total power – kW 26.7 total weight of the machine: 4,200 ...

    Hamburg, Germany
  • GMM Lexta 36 full-

    GMM Lexta 36 full-

    • Manufacturer: GMM
    • Model: Lexta 36

    Bridge saw for granite - Refurbished with 6 months warranty. Installation and training can be carried out at an extra cost. Maximum horizontal stroke of the saw 3600 mm Maximum vertical stroke of the saw 420 mm M...

    Hamburg, Germany
  • 1998 SIMEC LM2000/212

    1998 SIMEC LM2000/212

    • Manufacturer: Simec
    • Model: LM 2000

    Marble polishing line Slabs with 10 polishing heads per slab + 2 calibration units (80 cm) Slab loading carriage Intermediate roller conveyors Tilt-type slab unloading roller conveyor More used machines at: www.j...

    Hamburg, Germany
  • 1998 Pellegrini DF2000-

    1998 Pellegrini DF2000-

    • Manufacturer: Pellegrini
    • Model: DF2000

    Wire saw for marble and granite. Dimensions: 10 x 1.5 x h6 m Maximum block size: 4.1 x 2.2 m Diamond wire length: 19.70/21.70 m Diamond wire speed: 0-40 m/s More used machines at: www.janssen-usedmachines.com New...

    Hamburg, Germany
  • 2022 Fravizel Lynx + Halley

    2022 Fravizel Lynx + Halley MFCR 55

    • Manufacturer: Fravizel

    Mobile diamond wire saw on crawler undercarriage Built in 2022, start up in 2023 55 KW motor The upper rails are used for cutting blocks or walls. The wire saw moves along the approximately 8,000 mm long green un...

    Hamburg, Germany
  • 2012 R & R-Technik Volumen

    2012 R & R-Technik Volumen 20.000 Bm³/h

    • Manufacturer: R & R-Technik

    Large dust extraction system for a dry screen drum System without the drum, which is visible in the pictures. Exhaust air filter with an air volume of 20,000 Bm³/h Dust properties: dry, fine Raw gas dust content:...

    Hamburg, Germany
  • Sasso Flat 84-

    Sasso Flat 84-

    • Manufacturer: Sasso
    • Model: Flat

    Edge grinding machine a new belt new guide rollers new pressure rollers new bearings for the belt pulleys calibration 8 polishing heads 2 heads for the upper edge 2 heads for the lower edge underfloor saw for wor...

    Hamburg, Germany
  • 1999 GMM Radia full-

    1999 GMM Radia full-

    • Manufacturer: GMM
    • Model: Radia

    Bridge saw - Refurbished with 6 months warranty. Installation and training can be carried out at extra cost. Maximum horizontal stroke 3800 mm Maximum vertical stroke 700 mm Maximum bridge travel 4300 mm Maximum ...

    Hamburg, Germany
  • 2003 Bavelloni Egar 250-4

    2003 Bavelloni Egar 250-4

    • Manufacturer: Bavelloni
    • Model: Egar 250

    CNC Machining Center The machine has only 2,300 operating hours! X-axis 2,730 mm Y-axis 1,620 mm Z-axis 300 mm Tool positions: 19 Table size: 2,500 x 1,200 mm The machine comes complete with all the tools shown i...

    Hamburg, Germany
2425262728

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.