2006 PELLEGRINI FB 220 in Hamburg, Germany

Automatic trolley equipped with tilting table and plate holder when loading
Motorized roller conveyor: 2000 x 2300 mm (width x length) Rotating stick hammer head, equipped with n 5 hammers Ø16
mm with motorized conveyor belt Technical characteristics of the flame treatment machine:
Equipped with single burner flame system
Roll extension for the flame zone with dimensions: 1000 x 2200 mm
Automatic trolley equipped with tilting table and plate holder when unloading
- All bearings can be lubricated and have special protective seals.
- The area of the roller table where the flame treatment takes place is protected by protective plates made of hot-dip galvanized steel
protected.
- A special quick-release hammer guide is attached to the stick hammer head with five hammers.
- A water spray system is used to eliminate dust generated during curing
- The flame system is equipped with safety devices: the pilot flame is controlled by a thermocouple and
two temperature sensors and two gas leak detectors controlled, one near the machine (in the box) and the other
near the control unit; There are two solenoid valves with manual reset on the gas/oxygen line
appropriate.
This is an automatic machine and the whole processing line is also automatic, including even
loading/unloading the plates.
The plate being processed moves continuously forward, while the bridge has an oscillating lateral movement
has to ensure an even flame effect with uniform results over the entire surface of the
to ensure the plate being processed.
It enables very large output volumes and excellent quality. The bridge that supports the burner is
Also self-adjusting in height, so it is not necessary to use the machine for height adjustment
to stop, even if the panels to be processed have different thicknesses.
The burner system is attached to machines consisting of a set of nozzles that cover the entire plate width,
with flame monitoring unit.
The panels are fed longitudinally via a belt with a continuously variable speed drive. All
Components of the flame system are built and include the latest standards and norms (Atex).
Safety systems that block the flow of gas and oxygen in an emergency, such as: E.g. gas leak, pilot light out and
similar.
An automatic sandblasting machine using river or quartz sand, equipped with a water system to reduce dust
and with a soundproof cover.
The line is finished with.
- No.: 01 Automatic trolley suitable for loading panels. The model is mainly used for handling
Granite slabs and compact materials generally used.
The working area of the trolley is marked and the m/c electrical control panel is located outside the
Danger area.
- No.: 01 Automatic trolley for unloading panels.
Used for handling panels of all materials. The default maximum load is 1000
kg/max. Is loading.
- No.: 02 Coordinated motorized roller conveyor equipped with rollers only for loading and unloading panels
- No.: 01 The electrical control panel allows coordination with the other machines on the line.
Including .
No.: 01 Automatic trolley for loading plates
No.: 01 Motorized roller conveyor
No.: 01 Granite slabs flame and freeze
- Brand PELLEGRINI Meccanica No.: 01 Brush unit for plate cleaning No.: 01 Motorized roller conveyor No.: 01
Automatic trolley for unloading the panels
No.: 01 Double flame outlet, equipped with pipes and devices for correct gas supply