- Trusted Seller
Bonnot Extruder Single Screw 2 1/4
- Manufacturer: Bonnot
Bonnot single screw extruder. Equipped with 2-1/2" diameter by 40" long screw (16: 1 L to D), four 10" barrel segments with individual jackets for heating or cooling (temperature range up to 550°F) and 20 HP vari...
Carol Stream, IL - Trusted Seller
Werner & Pfleiderer Extruder Twin Screw ZSK-57-W50P
- Manufacturer: WP
Werner & Pfleiderer, Co-rotating twin screw, 57mm carbon steel compounding extruder with optional high torque drive rated at up to 350 kg per hour – depending on materials and application. L to D ratio 34:1 Equip...
Carol Stream, IL - Trusted Seller
1999 PTI pelletizing line with model TS4500 4.5″ 30:1 L/D extruder
- Manufacturer: PTI
1999 PTI pelletizing line with model TS4500 4.5″ 30:1 L/D extruder having an electrically heated, water cooled (closed loop), and side vented barrel at a nominal 42″ center-line height. The gearbox is a Flender m...
Elk Grove Village, IL - Trusted Seller
DAVIS STANDARD EXTRUDER MDL. MV35IN35SR
- Manufacturer: Davis-Standard
- Model: MV35IN35SR
107364 One (1) Used Davis Standard Extruder Model MV35IN35SR L/D BARREL HAVING A SEVEN (7) ZONE ELECTRICALLY HEATED, WATER COOLED (CLOSED LOOP), AND SIDE VENTED BARREL AT A 52" CENTERLINE HEIGHT. GEARBOX HAS A 5....
Illinois, USA 
GLOUCESTER 6″ EXTRUDER 12088
Gloucester 6″ extruder. No model number and no serial number. 30:1 L/D electrically heated water cooled 6 zone vented barrel with screw and clamp. No motor. 42″ center line 1HP 6″ x 11″ oval in-feed bridge breake...
Elk Grove Village, IL
WELEX 6″ EXTRUDER SCREW 12351
Welex 6″ extruder screw, S/N 24-0138, 38:1 L/D, 2 stage, 252.5″ overall length. Keyway is 9″ long x 1.5″ wide.
Elk Grove Village, IL
WELEX 6″ EXTRUDER SCREW 12347
- Manufacturer: Welex
Welex 6″ extruder screw, S/N JF05444-000, 32:1 L/D, 2 stage, 216″ overall length.
Elk Grove Village, IL
6″ WELEX EXTRUDER SCREW 12350
- Manufacturer: Welex
6″ Welex extruder screw, S/N 144812, 32:1 L/D, 2 stage 216″ overall length. 9″ long x 1.5″ wide keyway.
Elk Grove Village, IL
Elk Grove Village, IL
3.5″ TWO STAGE EXTRUDER SCREW 12027
3.5″ chrome plated two stage extruder screw with two rows of mixing pins. Unknown manufacturer.
Elk Grove Village, IL
WELEX 4.5" EXTRUDER SCREW 12343
- Manufacturer: Welex
Welex 4.5″ extruder screw, 2 stage 36:1 L/D, S/N 1803592, 36:1 L/D.
Elk Grove Village, IL
WELEX 4.5″ EXTRUDER SCREW 12730
- Manufacturer: Welex
Welex 4.5″ extruder screw, no S/N, single stage, double spiral, chrome plated, 24:1 L/D. 150″ long.
Elk Grove Village, IL
EGAN 3.5″ EXTRUDER 10949
- Manufacturer: Egan
Egan 3.5″ extruder, S/N JO0787808. 100HP 500-Volt DC motor into a belt driven 11.48:1 gearbox 30:1 L/D electrically heated water cooled vented and plugged barrel on a 65″ centerline. Gearbox is rated for 265HP ma...
Elk Grove Village, IL
TWO STAGE EXTRUDER SCREW WITH 12021
Two stage extruder screw with dual mixing sections. Approximately 28:1 L/D. Single key shaft. Unknown manufacturer.
Elk Grove Village, IL
BRABENDER 3/4″ LAB EXTRUDER 18623
- Manufacturer: Brabender
Used C.W. Brabender Independent Table Top Extruder. S/N 1067/4. Type IND/EXTR/16-04-000. 3/4″ diameter 25:1 L/D ratio barrel. Four (4) zone temperature control panel. Extruder driven by a 1 HP D/C motor with SCR ...
Elk Grove Village, IL
Davis-Standard Thermatic Extruder
- Manufacturer: Davis-Standard
- Model: Thermatic
Good condition Davis-Standard Thermatic Extruders manufactured in 2001. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword