Used Extruders in Illinois, USA

BELLAFORM BH25-25D 25mm EXTRUDER 14768

Bellaform co-extrusion package consisting of the following:Bellaform model BH25-25D 25mm extruder. S/N P19-330877, 10.5 kW AC motor with tachometer and drive, 220-Volt operation. 25:1 L/D air cooled barrel with 3...

GLOUCESTER 3.5″ 32:1 L/D EXTRUDER 18364

One (1) Used Gloucester model 35250R2 3.5” 32:1 L/D extruder. S/N 36736/11. Having an electrically heated, air cooled, and non-vented barrel at approximately a 65” center line height. Barrel is set up for Contra-...

GLOUCESTER 2.5″ 32:1 L/D EXTRUDER 18366

One (1) Used Gloucester model 25225R2 2.5″ 32:1 extruder having an electrically heated, air cooled, and non-vented barrel at approximately a 65″ center line height. S/N 36736/25. Barrel is set up for Contra-Cool ...

WAYNE 1.250″ 30:1 L/D EXTRUDER 16355

• Manufacturer: Wayne

Wayne 1.25″ extruder, S/N 9414-832. 30:1 L/D electrically heated, air cooled, vented (venting is plugged), barrel driven by a 7.5HP DC motor with SCR control 230-Volts input power. Includes track wheel base and a...

HPM 3.5″ 30:1 L/D EXTRUDER 17578

One (1) used 3.5″30:1 HPM extruder having an electrically heated water cooled (closed loop) vented and plugged barrel at a 51 ½” centerline height. Koellmann gearbox is driven by a 100 HP D/C motor with a Eurothe...

DAVIS STANDARD 15INDS20 1.5″ EXTRUDER 12754

• Manufacturer: Davis-Standard

Davis standard model 15INDS20 1.5″ extruder S/N K-9754. SO# 02359. 24:1 L/D. Powered by a fan cooled 15 HP 500-Volt 1750/2300 RPM DC motor through a 6.53:1 gearbox 152 RPM screw speed. Electrically heated and fan...

WELEX 2″ 24:1 L/D CO-EXTRUDER 17576

• Manufacturer: Welex

One (1) used 2″ 24:1 L/D Welex co-extruder. Water cooled. Missing motor, drive panel, and pedestal. Last used on a sheet line.

GLOUCESTER 3.5″ 32:1 L/D EXTRUDER 18365

One (1) Used Gloucester model 35250R2 3.5″ 32:1 extruder having an electrically heated, air cooled, vented, and plugged barrel at approximately a 65″ center line height. S/N 36736/12. Barrel is set up for Contra-...

PRODEX 4.5″ 32:1 L/D EXTRUDER 18180

One (1) used Prodex 4.5″ 32:1 L/D extruder having an electrically heated, water cooled (closed loop), and side vented barrel. The gearbox is a Lufkin change gear type gearbox and is direct driven in a tuck under ...

GLOUCESTER 2.5″ 32:1 L/D EXTRUDER 17690

Gloucester 2.5″ extruder, 32:1 L/D five (5) zone air cooled and vented barrel at a 45″ centerline height. Top center feed throat. Driven by a 50 HP A/C 1750/2100 RPM motor, includes 6 zone temperature control pan...

DAVIS STANDARD 165MM60TPIH 6.5″ EXTRUDER 10869

• Manufacturer: Davis-Standard

Davis Standard model 165MM60TPIH, S/N X7206 27:1 L/D 150HP DC motor 100RPM screw speed 526HP rated gearbox with a 1.5 service factor. No feed throat, no control panel. Water cooled barrel. Last used as a secondar...

ACTUAL AE-25/10/22 25MM PEDESTAL EXTRUDER 18705

One (1) used Actual model AE-25/10/22 25mm pedestal extruder. Having a 24:1 L/D ratio. Unit has a three (3) zone electrically heated, air cooled, non-vented barrel. Barrel can be raised or lowered and also tilts ...

8 ZONE EXTRUDER CONTROL CONSOLE 18091

One (1) used eight (8) zone console type control panel. Last used with a Berstorff single screw extruder.

UN 14 ZONE EXTRUDER TEMPERATURE 18779

One (1) unused extruder temperature control panel consisting of fourteen zones of Eurotherm 2216E temp controls. Was set up for use with a 4.5″ 32:1 Gloucester extruder. Labeled for 5 extruder zones, 1 screen cha...

70mm LEISTRITZ EXTRUDER SIDE FEEDER 18279

• Manufacturer: Leistritz

Used 70mm Leistritz twin screw side feeder Model LSB70. Order No. 310.11004.01. Machine No. 4080. New 2011.