Used Extruders in Illinois, USA

DAVIS STANDARD 1.5″ PEDESTAL EXTRUDER 19059

• Manufacturer: Davis-Standard

One (1) used 1.5” 24:1 L/D Davis Standard model DS15 1.5” pedestal extruder having four (4) zone electrically heated and air-cooled barrel. S/N SO816. Shop Order Number 54242. Unit is mounted on a tripod with cas...

DAVIS STANDARD 1.5″ PEDESTAL EXTRUDER 19060

• Manufacturer: Davis-Standard

One (1) used 1.5” 24:1 L/D Davis Standard model DS15 1.5” pedestal extruder having a four (4) zone electrically heated and air-cooled barrel. S/N P2055. Shop Order Number 51763. Unit is mounted on a tripod with c...

DAVIS STANDARD 1.25″ PEDESTAL EXTRUDER 19062

• Manufacturer: Davis-Standard

One (1) used 1.25” 24:1 L/D Davis Standard model DS125 1.25” pedestal extruder having a three (3) zone electrically heated and air-cooled barrel. S/N S1962. Shop Order Number 55728. Unit is mounted on a tripod wi...

DAVIS STANDARD 1.5″ PEDESTAL EXTRUDER 19063

• Manufacturer: Davis-Standard

One (1) used 1.5” 24:1 L/D Davis Standard model DS15 1.5” pedestal extruder having a four (4) zone electrically heated and air-cooled barrel. S/N 2058. Shop Order Number 51306. Unit is mounted on a tripod with ca...

DAVIS STANDARD 1.5″ PEDESTAL EXTRUDER 19061

• Manufacturer: Davis-Standard

One (1) used 1.5” 24:1 L/D Davis Standard model DS15 1.5” pedestal extruder having four (4) zone electrically heated and air-cooled barrel. S/N S1966. Shop Order Number 55728. Unit is mounted on a tripod with cas...

BRABENDER 35mm TWIN SCREW EXTRUDER 16813

• Manufacturer: Brabender

One (1) used Brabender Prep Center having a model TSE35/17D-A conical twin screw extrusion head. .Two conical inter meshing screws with a 35mm diameter at the barrel discharge end and a 17:1 L/D ratio. S/N 187502...

DAVIS STANDARD 1.5″ PEDESTAL EXTRUDER 19064

• Manufacturer: Davis-Standard

One (1) used 1.5” 24:1 L/D Davis Standard model DS 15 1.5” pedestal extruder having a four (4) zone electrically heated and air-cooled barrel. S/N R0385. Shop Order Number 52609. Unit is mounted on a tripod with ...

DAVIS STANDARD 3.5″ EXTRUDER W/DUAL 17744

• Manufacturer: Davis-Standard

Davis Standard straw/tubing co-extrusion extrusion package manufactured 10/2012Last used on three color straws extruding two lanes of straws at one time. Extruders and controls are unitized on a single base. 460/...

KILLION 1.5″ 24:1 EXTRUDER SCREW 17747

Killion 1.5″ 24:1 L/D single stage extruder screw6 Available

2.5″ 30:1 L/D EXTRUDER 17759

Unknown manufacture 2.5″ extruder, 30:1 L/D air cooled non-vented barrel at a 23.5″ centerline. Powered by a 40 HP 230/460-volt A/C motor with Teco A510 inverter. 4″ x 6″ feed throat. Unitized control panel with ...

3.5″, EXTRUDER SCREW, 30:1 L/D 14756

3.5″ 30:1 extruder screw barrier mid-section, Previously ran PEP material.

KILLION 1″ 24:1 L/D EXTRUDER 16305

24:1 Killion pedestal extruder. S/N N6598 with a three (3) zone electrically heated air cooled barrel. Gearbox has a reduction ratio of 30:1 and is direct driven by a 3HP 1750/2050 RPM DC motor. Barrel can be rai...

WELEX 2″ 24:1 L/D EXTRUDER 17438

• Manufacturer: Welex

Welex model 200-24/1, 2″ 24:1 L/D extruder with a three (3) zone electrically heated, air cooled non-vented barrel at approximately a 50″ centerline height. Gearbox is a Koellmann Gear and is belt driven by a 20 ...

DAVIS STANDARD 165mm (6.5″) EXTRUDER 19033

• Manufacturer: Davis-Standard

One used (1) Davis Standard model 165MM60T 165mm (6.49″) extruder having a 34:1 L/D ratio with a nine (9) zone electrically heated, water cooled (closed loop), vented and plugged barrel at presently an 89″ center...