Used Mineral Processing

FLOTATION CELL WITH 24″ X 24″ X 18″ TANK
Description Manufacture and Design Expeller on bottom of shaft Tank: 24″ X 24″ X 18″ deep Launders Motor and Drive 3 HP General Electric motor 208-220/440 Volt 1750 RPM Belt drive Operating Frame Mounted on an op...
Canada
[BANK OF 2] HAZEN QUINN #5 SUB-A FLOTATION CELLS
- Manufacturer: Hazen quinn, quinn process equipment
Description Manufacture and Design Cell dimensions: 7″ x 7″ x 13″ deep Paddle shaft assembly Launder, left to right flow Operating Frame On operating stand 20″ x 18″ x 42″ high
Canada
Mefiag 13000 GPH Horizontal Disc Filter F2605
- Manufacturer: Mefiag
Sold As-Is Refurbished. Filter Liner in Good Condition. New plumbing. Can add (2) 3 HP pumps for additional $5000 2″ Suction port. 2.5″ Discharge port. Filtration surface area: 124 Sq. Ft. Tested.
$24,500 USD
Oceanside, CA
Mefiag 1600 GPH Horizontal Disc Filter F2621
- Manufacturer: Mefiag
NEW / USED Used INVENTORY F2621 MANUFACTURER Mefiag MODEL-NBR 0640-SY STYLE Horizontal Disc GPH 1600 SIZE 8" DIMENSIONS 43"L x 31"W x 51"H TESTED BY DB HP 1 VOLTS 230/460 NUMBER-PLATES
$5,500 USD
Oceanside, CA
B. Braun SUPOR Disc Filter (50/Case)
- Manufacturer: B. Braun
SKU: BBN-415008 Utilizes innovative SUPOR filter membranes for syringe aspiration and injection applications 0.3 mL fluid retention Color coded Components are not made with DEHP or rubber tree latex Purchasing Re...
$156 USD
San Diego, CA
Trusted Seller
Acegc brand 10,000 L/h Knelson type gold concentrator
- Manufacturer: Shandong Huali
Acegc Falcon-Type Gold Concentrator, 10,000 L/h Brand: Acegc Model: 0086-15053659999 Type: Knelson Used, unserviced With electric motor: 7.5 HP 960 RPM 8 POLES 380 V 50 Hz Brand: Shandong Huali
Hermosillo, Mexico
Trusted Seller
Mill, SAG, 32' x 12', Hardinge-Koppers, 6800 HP Dual Drive #D744636
- Manufacturer: Hardinge
32' x 12' SAG mill, manufactured by Hardinge-Koppers, driven by dual GE 3400 HP 4000 V, 60 Hz AC wound rotor induction motors, model 108770. Complete with trunnions, trunnion liners, girth gear, pinion assemblies...
Canada
Trusted Seller
Mill, Sag, 13'6" X 4', Marcy, No Motor, #D739647
- Manufacturer: Marcy
Marcy Dry Grind SAG Mill, 13' 6" Diameter x 4' Long. Includes bull gear, pinion gear, large Falk gearbox, air clutch, and lube set. No motor. Manufactured new in 1988.
Canada
20″ KNELSON CD20 CONCENTRATOR, 7.5 HP
- Manufacturer: Knelson concentrators
Description 20″ Knelson CD20 Concentrator, 7.5 HP Motor & Belt Drive, 575 Volt, Urethane Bowl. Equip yourself with the gold standard. Manufacture & Design Model #: KC-CD20 Serial #: 20CD961111309029 Components & ...
Canada
32″ KNELSON CVD32 CONCENTRATOR
- Manufacturer: Knelson concentrators
Description 32″ Knelson CVD32 Concentrator, Continuously Variable Discharge, Fully Automated Controls, 40 HP motor. Equip yourself with the gold standard. Manufacture & Design Model #: KC-CVD32 Continuously Varia...
Canada
[BANKS OF 6] DENVER #8 SUB-A FLOTATION CELLS
- Manufacturer: Denver
Description 3) 2 HP motors with dual drives Froth paddles with belt drive Feed box Bottom and side wear plates Mechanism support beam Note: One (1) bank of 6 is less mechanisms
Canada
20″ KNELSON CD20VG CONCENTRATORS
- Manufacturer: Knelson concentrators
Description 20″ Knelson CD20VG Concentrators, Sequential serial numbers, year 2014 with G7 Cone. Equip yourself with the gold standard. Manufacture & Design Model KC-CD20-VG Year 2014 ID N1737 Serial # CD20140111...
Canada
30″ KNELSON CONCENTRATOR
- Manufacturer: Knelson concentrators
Description Manual discharge Rubber cone Water piping 10 HP, 230/460 volt motor
Canada
Trusted Seller
Mill, Sag, 38' X 25'5", Metso, 26,016 HP, Unused #D739643
- Manufacturer: Metso
Unused Metso sag mill, 38' (11.58 m) diameter x 25' 5" (7.76 m) long, 26,016 HP (19,400 kw) Siemens wrap around drive motor-operating frequency 50/60 Hz. EGL: 22' (6.7 m), mill speed: 7.5-10.08 RPM. Maximum volum...
Canada
Trusted Seller
Mill, Sag, 40' X 25', FL Smidth, 34,866 HP, Unused #D739644
- Manufacturer: FL Smidth
Unused FL Smidth SAG mill, 40' diameter x 25' length, designed for 34,866 HP (26,000 kW) wrap-around GMD motor (motor not included). No liners included.
Canada