Used Mineral Processing

[BANK OF 2] WEMCO #84 FLOTATION CELLS
- Manufacturer: Wemco
Description Manufacture and Design Double overflow design Components (1) 2-cell Tank (1) Mechanism (1) 15 HP GE Motor, 440 Volt, 1775 RPM (1) Intermediate box
Canada
4.5 M X 4.2 M AEROFALL SAG MILL, 1500 HP
- Manufacturer: Aerofall
Description Manufacture and Design Diameter: 4.5 m dia. (14.76′) Length: 4.2 m long (13.78′) Disassembled and ready for shipment Motor and Drive 1500 HP induction motor 4160 Volt
Canada
13′ X 4′ MARCY SAG MILL, 300 HP
- Manufacturer: Marcy
Description 13′ x 4′ Marcy SAG Mill 300 HP Westinghouse Motor, Falk Parallel Shaft Gearbox. Equip yourself with the gold standard. Components & Inclusions 300 HP Westinghouse Motor 575 Volt 1787 RPM TEFC Frame 44...
Canada
30″ KNELSON CONCENTRATOR
- Manufacturer: Knelson concentrators
Description Discharge Manual discharge Cone Steel cone Neoprene covered Motor 10 HP Toshiba motor
Canada
20″ KNELSON CD20 CONCENTRATOR, 7.5 HP
- Manufacturer: Knelson concentrators
Description 20″ Knelson CD20 Concentrator, 7.5 HP Motor & Belt Drive, 575 Volt, Urethane Bowl. Equip yourself with the gold standard. Manufacture & Design Model #: KC-CD20 Serial #: 20CD961111309029 Components & ...
Canada
32″ KNELSON CVD32 CONCENTRATOR
- Manufacturer: Knelson concentrators
Description 32″ Knelson CVD32 Concentrator, Continuously Variable Discharge, Fully Automated Controls, 40 HP motor. Equip yourself with the gold standard. Manufacture & Design Model #: KC-CVD32 Continuously Varia...
Canada
[BANKS OF 6] DENVER #8 SUB-A FLOTATION CELLS
- Manufacturer: Denver
Description 3) 2 HP motors with dual drives Froth paddles with belt drive Feed box Bottom and side wear plates Mechanism support beam Note: One (1) bank of 6 is less mechanisms
Canada
20″ KNELSON CD20VG CONCENTRATORS
- Manufacturer: Knelson concentrators
Description 20″ Knelson CD20VG Concentrators, Sequential serial numbers, year 2014 with G7 Cone. Equip yourself with the gold standard. Manufacture & Design Model KC-CD20-VG Year 2014 ID N1737 Serial # CD20140111...
Canada
10′ X 20′ RMS ROSS DEROCKER WASH PLANT WITH SLUICE AND SCREEN DECK
- Manufacturer: Ross
Description 10′ x 20′ RMS Ross Derocker Wash Plant with Sluice and Screen Deck. Equip yourself with the gold standard Components & Inclusions 10′ x 20′ RMS Ross Derocker 10′ x 20′ RMS Ross sluice box Extender win...
Canada
30″ KNELSON CONCENTRATOR
- Manufacturer: Knelson concentrators
Description Manual discharge Rubber cone Water piping 10 HP, 230/460 volt motor
Canada
Trusted Seller
Mill, Sag, 38' X 25'5", Metso, 26,016 HP, Unused #D739643
- Manufacturer: Metso
Unused Metso sag mill, 38' (11.58 m) diameter x 25' 5" (7.76 m) long, 26,016 HP (19,400 kw) Siemens wrap around drive motor-operating frequency 50/60 Hz. EGL: 22' (6.7 m), mill speed: 7.5-10.08 RPM. Maximum volum...
Canada
Trusted Seller
Mill, SAG, 32' x 12', Hardinge-Koppers, 6800 HP Dual Drive #D744636
- Manufacturer: Hardinge
32' x 12' SAG mill, manufactured by Hardinge-Koppers, driven by dual GE 3400 HP 4000 V, 60 Hz AC wound rotor induction motors, model 108770. Complete with trunnions, trunnion liners, girth gear, pinion assemblies...
Canada
Trusted Seller
Mill, Sag, 13'6" X 4', Marcy, No Motor, #D739647
- Manufacturer: Marcy
Marcy Dry Grind SAG Mill, 13' 6" Diameter x 4' Long. Includes bull gear, pinion gear, large Falk gearbox, air clutch, and lube set. No motor. Manufactured new in 1988.
Canada
Trusted Seller
Mill, Sag, 40' X 25', FL Smidth, 34,866 HP, Unused #D739644
- Manufacturer: FL Smidth
Unused FL Smidth SAG mill, 40' diameter x 25' length, designed for 34,866 HP (26,000 kW) wrap-around GMD motor (motor not included). No liners included.
Canada
Trusted Seller
WEMCO brand 3-cell flotation bank No. 16
- Manufacturer: Wemco
WEMCO 3-Cell No. 16 Floatation Bench No. 16 Used, no service
Hermosillo, Mexico