Used Mineral Processing in Canada

Conc jet pump system incl.: (5) 6 mm rubber lined hoppers

• Manufacturer: JET

Conc jet pump system incl.: (5) 6 mm rubber lined hoppers, (1) Eriez vibratory feeder, valves c/w (2) Warman centrifugal pumps, mod. 75WBH, 100 hp ea. (2nd Loc. Red Zone, Level M)

UV-IR infra-red/UV dryer

UV-IR infra-red/UV dryer, ser. no. 11070 (2015) w/ Eriez feeder, infeed and outfeed chutes c/w Kason vibratory separator, ser. no. M-1047, 1/3 hp

Warman sump-pump

• Manufacturer: Warman

Warman sump-pump, mod. V15F03, 20 hp c/w valves

Holman-Wilfley 8000SD Concentrating Table

• Manufacturer: Holman-Wilfley Ltd

Capacity: Up to 2,500 kgs/Hour (Particle Size Dependent) | Deck type: Single Deck | Deck area: 7.5m² | Deck size: 1,600mm x 4,900mm | Water supply requirements: 20 - 35L/min | Drive: Baldor Electric Motor | Powe...

Denver D-1 Lab Flotation Cell

• Manufacturer: Denver

Tachometer Not Installed Stainless Steel Wetted Parts (Urethane impeller and diffuser). Comes with 750mL Stainless Steel Tank

Denver No. 18 Special Flotation Cells

• Manufacturer: Denver

Manual Cell to Cell Flow Control Gate Naturally Aspirated Sealed Standpipe

(New) Duplex 26 in x 26 in High Efficiency Mineral Jig

Duplex High Efficiency Mineral Jig. Please see specs tab below for capacities and requirements. Recovers higher placer gold values than riffles. Specifications if used as Rougher Jig Specifications if used as Cle...

Mill, Sag, 40' X 25', FL Smidth, 34,866 HP, Unused #D739644

• Manufacturer: FL Smidth

Unused FL Smidth SAG mill, 40' diameter x 25' length, designed for 34,866 HP (26,000 kW) wrap-around GMD motor (motor not included). No liners included.

(New) Duplex 12 in x 12 in High Efficiency Mineral Jig

Duplex High Efficiency Mineral Jig. Equipped with: 2 hp electric motor. Recovers higher placer gold values than riffles. Shipping information:

(New) Duplex 42 in x 42 in High Efficiency Mineral Jig

Duplex High Efficiency Mineral Jig. Please see specs tab below for capacities and requirements. Recovers higher placer gold values than riffles. Specifications if used as Rougher Jig Specifications if used as Cle...

Mill, Sag, 38' X 25'5", Metso, 26,016 HP, Unused #D739643

• Manufacturer: Metso

Unused Metso sag mill, 38' (11.58 m) diameter x 25' 5" (7.76 m) long, 26,016 HP (19,400 kw) Siemens wrap around drive motor-operating frequency 50/60 Hz. EGL: 22' (6.7 m), mill speed: 7.5-10.08 RPM. Maximum volum...

Mill, SAG, 32' x 12', Hardinge-Koppers, 6800 HP Dual Drive #D744636

• Manufacturer: Hardinge

32' x 12' SAG mill, manufactured by Hardinge-Koppers, driven by dual GE 3400 HP 4000 V, 60 Hz AC wound rotor induction motors, model 108770. Complete with trunnions, trunnion liners, girth gear, pinion assemblies...

Mill, Sag, 13'6" X 4', Marcy, No Motor, #D739647

• Manufacturer: Marcy

Marcy Dry Grind SAG Mill, 13' 6" Diameter x 4' Long. Includes bull gear, pinion gear, large Falk gearbox, air clutch, and lube set. No motor. Manufactured new in 1988.

(New) Hy-G HR16 Concentrator with Deep Bowl Technology

• Manufacturer: Hy-G Concentrators Inc.

Recovering free gold and other heavy metals and minerals in crushing, milling, or recycling circuits. Reprocessing crushed and milled tailings to remove gravity recoverable gold and other heavy metals and minerals.

Hy-G HR10 Centrifugal Gravity Concentrator – Hard Rock

• Manufacturer: ROCA

Applications: Recovering free gold and other heavy metals and minerals in crushing, milling, or recycling circuits Reprocessing crushed and milled tailings to remove gravity recoverable gold and other heavy metal...