Used Davis-Standard Processing

Trusted Seller
DAVIS STANDARD 2.5"
- Manufacturer: Davis-Standard
- Model: 25
Used 2.5" Davis Standard extrusion screw. Marking on the screw read XA241155JT, C32819, and SL3-1.
Hainesport, NJ
Trusted Seller
DAVIS STANDARD 1.5"
- Manufacturer: Davis-Standard
- Model: 15
Used 1.5" Davis Standard 28/1 L/D Non-Vented Air Cooled Extruder. New in 1989. Equipped with 6.53/1 gearbox ratio. Gearbox is belt driven through a 15 hp DC motor. Includes temperature control panel with motor dr...
Hainesport, NJ
Trusted Seller
Davis Standard 120MM45CT
- Manufacturer: Davis-Standard
-L/D Ratio: 30:1 -Electrically Heated -Water Cooled -Temperature Control Panel
$39,900 USD
Get financing
Est. $751/mo
Chicago, IL
Trusted Seller
Davis-Standard Barrel Covers
- Manufacturer: Davis-Standard
Davis-Standard Barrel Covers Lot of unused Davis-Standard barrel covers.
New Jersey, USA
Trusted Seller
DAVIS STANDARD 150INDS-20
- Manufacturer: Davis-Standard
Used 1.5” Davis Standard Vented Single-Screw Extruder Model: 150IN DS-20 Driven by a nontagged motor and a Reliance model GV3000 AC drive Gearbox: 6.53:1 ratio, rated for 50 hp, 1.25 service factor, 152 rpm screw...
Hainesport, NJ
Trusted Seller
1991 DAVIS STANDARD 4.5"
- Manufacturer: Davis-Standard
Used 4.5" Davis Standard 30/1 L/D Extruder, Electrically Heated Air Cooled Barrel. Includes gearbox with 17.36/1 gear ratio rated at 321 hp. Serial #M-3315, SO #05432. New 10/1991. Includes Kryenborg Type K-SWE-1...
Hainesport, NJ
Trusted Seller
2000 DAVIS STANDARD 5.11"
- Manufacturer: Davis-Standard
Used 130mm (5.11") 30/1 L/D Non-Vented Davis Standard Extruder. Driven by 250 hp DC motor with 42" centerline air cooled barrel. Includes heat panel (without temperature controller), SCR controller and 6" continu...
Hainesport, NJ
Trusted Seller
1997 DAVIS STANDARD 5.11"
- Manufacturer: Davis-Standard
Used 130mm (5.11") 30/1 L/D Non-Vented Davis Standard Extruder. Driven by 250 hp DC motor with 42" centerline air cooled barrel. Includes heat panel (without temperature controller), SCR controller and 6" continu...
Hainesport, NJ
Trusted Seller
DAVIS STANDARD EXTRUDER MDL. MV35IN35SR
- Manufacturer: Davis-Standard
- Model: MV35IN35SR
107364 One (1) Used Davis Standard Extruder Model MV35IN35SR L/D BARREL HAVING A SEVEN (7) ZONE ELECTRICALLY HEATED, WATER COOLED (CLOSED LOOP), AND SIDE VENTED BARREL AT A 52" CENTERLINE HEIGHT. GEARBOX HAS A 5....
Illinois, USA
Trusted Seller
Davis Standard DS-20 Single Screw Extruder Gearbox 6.53 Ratio 50Hp 152RPM
- Manufacturer: Davis-Standard
- Model: DS-20
Used, in Good Working Condition. Removed From a Working Environment. Gearbox off of a extruder. 1-1/2" Input and output If this item ships as Flat Rate Freight please see details in Shipping tab
$1,350 USD
Millersburg, IN
6″ DAVIS STANDARD / XALOY 18739
- Manufacturer: Davis-Standard
Used Davis Standard / Xaloy 6″ pelletizing line consisting of:Used Davis Standard / Xaloy 6″ pelletizing line consisting of: One (1) Davis Standard model 60IN60TPTH 6″ extruder having a 34:1 L/D ratio with a seve...
Elk Grove Village, IL
DAVIS STANDARD COOLING TANK 12803
- Manufacturer: Davis-Standard
Davis Standard cooling tanks, no S/N. Stainless steel construction. Measures 48″ x 24″ x 16″. Unit includes a pressure gauge, level meter, and pressure relief valve. Manufactured in January 2011. Never been used.
Elk Grove Village, IL
DAVIS STANDARD SINGLE STAGE EXTRUDER 12020
- Manufacturer: Davis-Standard
4.5″ Davis Standard single stage extruder screw. Approximately 28:1 L/D with mixing pins at screw end.
Elk Grove Village, IL
DAVIS STANDARD 8″ 900 HP 18828
- Manufacturer: Davis-Standard
Used Davis Standard Model 80IN80HT 8″ 32:1 L/D extruder having a seven (7) zone electrically, heated, water cooled (closed loop), and vented barrel at a 44″ center-line. S/N AA454. Shop Order 72635. Gearbox has a...
Elk Grove Village, IL
NRM / DAVIS STANDARD 1.5″ 16125
- Manufacturer: Davis-Standard
NRM / Davis Standard 1.5″ Pacemaker IV extruder, S/N 19218, S/O 52660. 24:1 L/D air cooled electrically heated barrel with a 42″ to 44-3/4″ adjustable centerline. Driven by a 10 HP 1750/2300 RPM DC motor with Rel...
Elk Grove Village, IL