- Trusted Seller

Davis Standard 120MM45CT
- Manufacturer: Davis-Standard
-L/D Ratio: 30:1 -Electrically Heated -Water Cooled -Temperature Control Panel

Davis Standard 2.5" Cold Feed Rubber Extruder
- Manufacturer: Davis-Standard
One (1) Used Davis Standard 2.5" 60mm Cold Feed Rubber Extruder, Model 25IN25, 20:1 L/D, 17.28:1 G/B ratio, 40 HP 480 VAC motor, AC VFD drive, forced lube system, Davis Standard patented pneumatic pressure roller...
Cleveland, OH
Davis Standard 6 inch 150mm Rubber Extruder
- Manufacturer: Davis-Standard
One (1) Used Davis Standard 6" 150mm Cold Feed Rubber Extruder, 20:1 L/D, gearbox rated at 300 HP, gear driven power feed roll, belt drive, no motor, S/N 05329, Date 1999
Cleveland, OH
Davis Standard 2.5" Cold Feed Rubber Extruder
- Manufacturer: Davis-Standard
One (1) DS Davis Standard 2.5" 60mm Cold Feed Rubber Extruder, Model 25IN25, 20:1 L/D, 17.26:1 G/B ratio, Reliance 40 HP 1185 RPM 460 VAC motor, VFD variable frequency drive, control panel, clamp assembly, forced...
Cleveland, OH
1999 1999 Davis Standard 4.4" Twin Screw Extruder
- Manufacturer: Davis-Standard
Size: 112 mm | Screw type: Twin | Voltage: 460/3/60
Valley City, OH
Davis Standard 1.25" Plastic Extruder Model DS-125
- Manufacturer: Davis-Standard
Item 6519 - One (1) Used 1.25" 32mm Plastic Extruder, Model DS-125, 24:1 L/D ratio, 5 HP DC Motor, Gearbox ratio 15:1, S/N L8345, Date 1991
Cleveland, OH- Trusted SellerAuction

Davis-Standard Tandem Film Extrusion Coating Line
- Manufacturer: Davis-Standard
Davis-Standard Tandem Film Extrusion Coating Line Specsheet: Film Thickness: 1 mil - 15 mil Web Width: 30" - 80" Unwind Core Sizes: 3" / 6" / 10" Max. Unwind Roll Diameter: 45" Rewind Core Size: 6" Max. Rewi...
Franklin Park, ILVisit Auction Website - Trusted Seller
Hainesport, NJ - Trusted Seller

2001 DAVIS STANDARD PEDESTAL
- Manufacturer: Davis-Standard
- Model: PEDESTAL
Used 1.25" Davis Standard Pedestal Extruder With 36/1 L/D Vented Barrel. New 2001. Has electrically heated air cooled barrel, includes temperature control panel and 5 hp AC motor, 230/460 volt. Previously used as...
Hainesport, NJ - Trusted Seller
DAVIS STANDARD 4.5"
- Manufacturer: Davis-Standard
Used 4.5" Davis Standard 30/1 L/D Extruder, Electrically Heated Air Cooled Barrel. Includes gearbox with 17.36/1 gear ratio rated at 321 hp. Serial #M3316, SO #05432. New 10/1991. Includes Kryenborg Type K-SWE-12...
Hainesport, NJ - Trusted SellerHainesport, NJ
- Trusted SellerHainesport, NJ
- Trusted Seller
DAVIS STANDARD 2.5"
- Manufacturer: Davis-Standard
- Model: 25
Used 2.5" Davis Standard extrusion screw. Marking on the screw read XA241155JT, C32819, and SL3-1.
Hainesport, NJ - Trusted Seller

DAVIS STANDARD 1.5"
- Manufacturer: Davis-Standard
- Model: 15
Used 1.5" Davis Standard 28/1 L/D Non-Vented Air Cooled Extruder. New in 1989. Equipped with 6.53/1 gearbox ratio. Gearbox is belt driven through a 15 hp DC motor. Includes temperature control panel with motor dr...
Hainesport, NJ - Trusted Seller
Davis-Standard Barrel Covers
- Manufacturer: Davis-Standard
Davis-Standard Barrel Covers Lot of unused Davis-Standard barrel covers.
New Jersey, USA

