Used Davis-Standard Processing

DAVIS STANDARD 165MM60TPIH 6.5″ EXTRUDER 10869

• Manufacturer: Davis-Standard

Davis Standard model 165MM60TPIH, S/N X7206 27:1 L/D 150HP DC motor 100RPM screw speed 526HP rated gearbox with a 1.5 service factor. No feed throat, no control panel. Water cooled barrel. Last used as a secondar...

NRM/DAVIS STANDARD 3.5PMIV RH/WC VTD/PLGO 12733

NRM / Davis Standard model 3.5PMIV RH/WC VTD/PLGO, 3.5″ extruder, S/N 19222. 24:1 L/D water cooled 7 zone vented and plugged barrel. Approximately 100-150HP DC motor into a belt driven 15.12:1 gearbox with a 1.25...

6″ Davis Standard 30:1 Extruder

• Manufacturer: Davis-Standard

6″ Davis Standard 36:1 -400 HP

• Manufacturer: Davis-Standard

6″ Davis Standard 34:1 -500 HP -Vented (2 vents) Extruders (2 available)

1 1/4″ Davis Standard Extruders (Stripers) 4 Available

• Manufacturer: Davis-Standard

4.5″ Davis Standard Extruder MV45IN45 1997

• Manufacturer: Davis-Standard

4.5″ Davis Std. Extruder MV45IN45 – New 1998 Water Cooled 24:1 N-Vented

Rebuilt Davis-Standard 6” Extruder Model 60IN60TPIH – 500 HP, 30:1 L/D

• Manufacturer: Davis-Standard
• Model: 60IN60TPIH

51068004 Used Rebuilt Davis-Standard 6" Extruder Model 60IN60TPIH 500 HP, 30:1 L/D. 5/98, 43" center line height, 13.4:1 gearbox having new bearings (less thrust) with cooling unit, heat exchanger, motor driven...

Davis Standard 9" Extruder, Model 80IN80HT – 32:1 L/D, 900 HP Motor, Built 2001

• Manufacturer: Davis-Standard

10755163 Used Davis Standard 9" Extruder, Model 80IN80HT. 32:1 L/D ratio; (7) zone electrically heated, water cooled (closed loop), and vented barrel at a 44" center-line; 10.15:1 Gearbox reduction ratio; Gearbox...

2.5" Davis Standard / Gala Pilot Plant Pelletizing Line – 75 kW Extruder, Underwater Pelletizer, Spin Dryer, 2020

• Manufacturer: Davis-Standard
• Model: 25

53759005 Used 2.5" Davis Standard/Gala Pilot Plant Pelletizing Line. 2.5" Davis Standard Extruder, Model 25, 24:1 L/D Ratio, 4 zones air cooled barrel, 75 KW HP Capacity, 1.25 SF, 17.26 to 1 gear reduction ratio,...

6″ Davis Standard 30:1 – 300 HP AC – Model 600S Thermatic Extruder

• Manufacturer: Davis-Standard
• Model: Thermatic

6″ Davis Standard 30:1 – 300 HP AC – Model 600S Thermatic Extruder 6″ Davis Standard Model 600S Thermatic Extruder 8″ x 8″ water cooled square feed throat, all new gearbox bearings (less thrust) 17.21 gearbox rat...

6″ Davis Standard 60IN60TPIH 30:1 500 HP VENTED EXTRUDER

• Manufacturer: Davis-Standard

Davis Standard 1.5" Extruder – Model 150IN DS-20, 24:1 L/D, Vented Barrel, 50 HP Gearbox

• Manufacturer: Davis-Standard
• Model: 150IN DS-20

10755179 Used Davis Standard 1.5" Extruder, Model 150IN DS-20. 24:1 L/D vented barrel at a 42" centerline. Davis Standard 6.53:1 gearbox rated for 50 HP with a service factor of 1.25 for a 152 RPM screw speed. Ge...