Used Extruders

Theyson TSK 060-44D-EXH 1500 Twin Screw Extruder | 60mm | 55 kW | 44:1 L/D | ATEX Motor
- Manufacturer: TheysohnTheysohn
54072001 Unused Theyson TSK 060-44D-EXH 1500 Twin Screw Extruder | 60mm | 55 kW | 44:1 L/D | ATEX Motor. 44:1 L/D. Maximum screw speed 500 RPM via a gearbox by a 55 Kw (73.75hp)1500 RPM-380volt/50cycle/3Ph Ex-pro...
Belvidere, IL
Leistritz MIC 27-GL-36D Twin Screw Extruder – 27mm, 36:1 L/D, 15.75 HP, Co-/Counter-Rotating, Built 2006
- Manufacturer: Leistritz
10755170 Used Leistritz Twin Screw Extruder, Type MIC 27-GL-36D. (2) 1.05" (27 mm) diameter screws. 36:1 L/D Ratio. Co-rotating. 8-barrel housing section electrically heated, water cooled. (1) Degassing port. Max...
Belvidere, IL
Xinda PSHJ-35 Twin Screw Extruder – 35.6mm, 42:1 L/D, 600 RPM, Clam Shell Barrel, 15kW, With Conveyor & Cutter – 2021
54023001 Used Xinda Twin Screw Extruder, Model PSHJ-35. 35.6mm screw diameter; 42:1 L/D ratio; 600 RPM screw speed; 30-100 kg/hour output; Clam shell barrel. 15 kW motor, 3/60/480V. Built 2021. With cooling conve...
Belvidere, IL
Trusted Seller
Extrusion Dies for Plastic Extruder Tooling One Price for Lot
Palm Tree # LR-000000-01262021-BS-02 Picture# 01252021 Bid with Confidence on this item, check our feedback!!! * All information deemed accurate but may vary from model to model. Contact Larry for any questio...
$1,995 USD
Providence, RI
Trusted Seller
Polar Process / Advanced Stain Feeder Auger PP352HU3
- Manufacturer: Polar
Polar Process / Advanced Stainless, Model PP352HU3, stainless steel, twin screw extruder and feeder, with pounds of product per hour – depending on materials and application. Hopper dimensions: 12½" in Length; 7½...
Carol Stream, IL
Trusted Seller
EDI/Nordson H-40 Extrusion Dies
- Manufacturer: EDI
- Model: H-40
Model HD-40 Sheet Die Having a 60″ Slot Opening. Integral Upper Flexible Lip and Fixed Lower Lip. Adjusting Bolts on 1″ Centers. 0.040″ Flex Adjustment. Coat-Hanger Manifold. 2 ½” Square Back Center Feed. Last R...
$8,500 USD
Get financing
Est. $167/mo
Chicago, IL
Trusted Seller
2002 Nordson H-40 Extrusion Dies
- Manufacturer: Nordson
Unused Refurbished Extrusion Dies / Nordson Model H-40 Sheet Die .58″ Slot Opening. Integral upper flexible lip and fixed lower lip. Adjusting bolts on 1″ centers. 0.040″ flex adjustment. Coat-hanger manifold. W...
$14,500 USD
Get financing
Est. $285/mo
Chicago, IL
DAVIS STANDARD 4.5″ SINGLE STAGE 12018
- Manufacturer: Davis-Standard
Davis Standard 4.5″ single stage extruder screw. Approximately 28:1 L/D with four rows of mixing pins.
Elk Grove Village, IL
DAVIS STANDARD 4.5″ SINGLE STAGE 12022
- Manufacturer: Davis-Standard
Davis Standard 4.5″ single stage extruder screw. Approximately 30:1 L/D with three rows of mixing pins near the screw end.
Elk Grove Village, IL
DAVIS STANDARD 2.5″ BARREL WITH 2023
- Manufacturer: Davis-Standard
Davis Standard 2.5″ extruder barrel. 24:1 L/D with Xalloy 800 liner. Barrel measures approximately 10-14 millimeters of wear.
Elk Grove Village, IL
NEW / UN WELEX 4.5 12346
- Manufacturer: Welex
New chrome plated Welex 4.5″ extruder screw, S/N 18079. 36:1 L/D, 8″ long x 1″ wide, keyway 190.5″ overall length.
Elk Grove Village, IL
STEER ENGINEERING 12mm TWIN SCREW 16620
Steer Engineering Pharmaceutical twin-screw extruder, S/N EA00427. Model Omicron 12P new in 2014. Screw diameter is 12mm diameter ratio (do/di) is 1.45 flight depth is 1.9 max screw speed is 900 RPM 2HP drive, 48...
Elk Grove Village, IL
WELEX 3.5″ 30:1 L/D 100 17579
- Manufacturer: Welex
One (1) used 3.5″ 30:1 L/D Welex Model 350-2-1984-RHNV extruder having an electrically heated water cooled (closed loop) non-vented barrel at a 54″ center line height. Koellmann gearbox has a reduction ratio of 1...
Elk Grove Village, IL
NRM PACEMAKER III 3.5″ 32:1 18061
One (1) used NRM PM III 3.5″ 32:1 L/D extruder having a five (5) zone electrically heated, air cooled, and non-vented barrel at an approximate 42″ center line height. Gearbox has a reduction ratio of 17.42:1 and ...
Elk Grove Village, IL
EGAN 6″ 30:1 L/D 400 18037
- Manufacturer: Egan
One (1) used Egan 6″ 30:1 L/D extruder. S/N 37910. Having an electrically heated, water cooled (closed loop), and vented barrel at an approximate a 42” center line height. Water system is incomplete. Philadelphi...
Elk Grove Village, IL