Used Extruders

BERLYN 2″ 30:1 L/D 40 18399

One (1) Used 2” Berlyn extruder having a 30:1 L/D ratio with a six (6) zone electrically heated, non-vented, both air- and water-cooled barrel at approximately a 42″ center line height. S/N 025D379. Gearbox is a ...

BRABENDER IT7150 3/4″ & 1″ 19044

• Manufacturer: Brabender

Blades Stock No. 19044 – Brabender model Intelli-Torque IT7150 extruder. Currently installed 24:’ L/D barrel with 3/4″ screw and included spare 30:1 L/D barrel with 1″ screw. 2003 model year. Includes one each 4″...

DAVIS STANDARD 3.5″ 30:1 75 18867

• Manufacturer: Davis-Standard

One (1) used Davis Standard model 35IN35 extruder. S/N M3922. Shop order 05580. Extruder has 30:1 L/D ratio with a six (6) zone electrically heated, air cooled, and vented barrel at a 42″ center-line. Gearbox has...

DAVIS STANDARD 150IN 1.5″ 24:1 17708

• Manufacturer: Davis-Standard

Davis Standard model 150IN DS-20 1.5″ extruder, S/N J6173, 1984 model year, 24:1 L/D vented barrel at a 42″ centerline. Davis Standard 6.53:1 gearbox rated for 50 HP with a service factor of 1.25 for a 152 RPM sc...

DAVIS STANDARD 8″ 900 HP 18828

• Manufacturer: Davis-Standard

Used Davis Standard Model 80IN80HT 8″ 32:1 L/D extruder having a seven (7) zone electrically, heated, water cooled (closed loop), and vented barrel at a 44″ center-line. S/N AA454. Shop Order 72635. Gearbox has a...

HARTIG 2.5″ 24:1 L/D 50 18342

One (1) Used 2.5″ Hartig extruder. S/N BE-819. 24:1 L/D four (4) zone electrically heated, air cooled, and non-vented barrel at approximately a 42″ center line height. 3″ round feed entrance. Koellmann gearbox ha...

DAVIS STANDARD 3.5″ SINGLE STAGE 12028

• Manufacturer: Davis-Standard

Davis Standard 3.5″ chrome plated single stage extruder screw. Approximately 24:1 L/D. Four rows of mixing pins.

DAVIS STANDARD 4.5″ 30:1 L/D 18589

• Manufacturer: Davis-Standard

One (1) used Davis Standard model 45IN45CT extruder. S/N P5568. Shop order 53447. Extruder has 30:1 L/D ratio with a six (6) zone electrically, heated air cooled, and non-vented barrel at a 42″ centerline. Water ...

KILLION KN-150 1.5″ 30:1 L/D 18111

One used Killion model KN-150 1.5″ 30:1 extruder. S/N 15437. Five (5) zone electrically heated, air cooled, and top-vented barrel at an approximate 39″ centerline height. Gearbox is a Koellmann model PEZS20 and h...

TWO STAGE 4.5″ CHROME PLATED 12019

4.5″ chrome plated two stage extruder screw with mixing pins at the end of first stage. Approximately 28:1 L/D single key shaft. Unknown manufacturer.

KILLION 1.250″ 30: 7.5 HP 16432

One used Killion model KN-125 1.25” 30:1 extruder having a four (4) zone electrically heated, air cooled, and non-vented barrel at approximately a 39″ centerline height. Gearbox is a Koellmann model PEZS-20 and h...

DAVIS STANDARD 1.5″ 34:1 L/D 17542

• Manufacturer: Davis-Standard
• Model: Thermatic

one (1) used Davis Standard model Thermatic 150 1.5″ extruder, S/N 62570, 34:1 L/D barrel having a five (5) zone electrically heated, air cooled, and non-vented barrel at approximately a 42? centerline height. Ge...

DAVIS STANDARD 1.5″ 20:1 L/D 17504

• Manufacturer: Davis-Standard

One (1) used 1.5″ 20:1 L/D ratio Davis Standard rubber extruder with powered feed roll on throat. Barrel is electrically heated, water cooled (closed loop) and vented at approximately a 42″ centerline height. Inc...

UNK MFG 5″ SINGLE SCREW 12404

Unk Mfg. 5″ single screw extruder barrel, non-vented, 24:1 L/D, 8 bolt flange mount to gearbox. Threaded front of barrel to accept screen changer. Overall length is 134.5″ with 4.25″ end extension.

WELEX 3.5″ 30:1 L/D 150 17954

• Manufacturer: Welex

One (1) used Welex 3.5″ 30:1 L/D extruder. Electrically heated water cooled (closed loop) and vented barrel at an approximate 69″ center line height. Center line height can be reduced approximately 8″ by removing...