Used Extruders

A&G EXTRUSION 30MM 3 HP 18677

• Manufacturer: A&G Mercury

One (1) used A & G Extrusion Model CE-30 30mm pedestal extruder. S/N 1380. Having a 20:1 L/D ratio. Unit has an electrically heated and non-vented barrel. Single blower on last zone of the barrel. Benzlers gearbo...

NRM / DAVIS STANDARD 1.5″ 16125

• Manufacturer: Davis-Standard

NRM / Davis Standard 1.5″ Pacemaker IV extruder, S/N 19218, S/O 52660. 24:1 L/D air cooled electrically heated barrel with a 42″ to 44-3/4″ adjustable centerline. Driven by a 10 HP 1750/2300 RPM DC motor with Rel...

KILLION / WAYNE 1″ LAB 18656

One (1) used laboratory sheet line consisting of the following:Killion model KL-100 1″ 24:1 extruder. S/N 12809. Unit has a three (3) zone electrically heated, air cooled, top vented, and plugged barrel at a 42″ ...

BRABENDER IT7150 3/4″ & 1″ 19044

• Manufacturer: Brabender

Blades Stock No. 19044 – Brabender model Intelli-Torque IT7150 extruder. Currently installed 24:’ L/D barrel with 3/4″ screw and included spare 30:1 L/D barrel with 1″ screw. 2003 model year. Includes one each 4″...

DAVIS STANDARD 3.5″ DOUBLE SPIRAL 12398

• Manufacturer: Davis-Standard

Davis Standard 3.5″ double spiral screw 32:1 L/D, 136″ overall length 12″ shank.Three are available.

DAVIS STANDARD 150IN 1.5″ 24:1 17708

• Manufacturer: Davis-Standard

Davis Standard model 150IN DS-20 1.5″ extruder, S/N J6173, 1984 model year, 24:1 L/D vented barrel at a 42″ centerline. Davis Standard 6.53:1 gearbox rated for 50 HP with a service factor of 1.25 for a 152 RPM sc...

DAVIS STANDARD 1.5″ 34:1 L/D 17542

• Manufacturer: Davis-Standard
• Model: Thermatic

one (1) used Davis Standard model Thermatic 150 1.5″ extruder, S/N 62570, 34:1 L/D barrel having a five (5) zone electrically heated, air cooled, and non-vented barrel at approximately a 42? centerline height. Ge...

DAVIS STANDARD 1.5″ 20:1 L/D 17504

• Manufacturer: Davis-Standard

One (1) used 1.5″ 20:1 L/D ratio Davis Standard rubber extruder with powered feed roll on throat. Barrel is electrically heated, water cooled (closed loop) and vented at approximately a 42″ centerline height. Inc...

BERLYN 2″ 30:1 L/D 40 18399

One (1) Used 2” Berlyn extruder having a 30:1 L/D ratio with a six (6) zone electrically heated, non-vented, both air- and water-cooled barrel at approximately a 42″ center line height. S/N 025D379. Gearbox is a ...

HARTIG 2.5″ 24:1 L/D 50 18342

One (1) Used 2.5″ Hartig extruder. S/N BE-819. 24:1 L/D four (4) zone electrically heated, air cooled, and non-vented barrel at approximately a 42″ center line height. 3″ round feed entrance. Koellmann gearbox ha...

KILLION KN-150 1.5″ 30:1 L/D 18111

One used Killion model KN-150 1.5″ 30:1 extruder. S/N 15437. Five (5) zone electrically heated, air cooled, and top-vented barrel at an approximate 39″ centerline height. Gearbox is a Koellmann model PEZS20 and h...

KILLION 1.250″ 30: 7.5 HP 16432

One used Killion model KN-125 1.25” 30:1 extruder having a four (4) zone electrically heated, air cooled, and non-vented barrel at approximately a 39″ centerline height. Gearbox is a Koellmann model PEZS-20 and h...

DAVIS STANDARD 1/4″ TUBING EXTRUSION 17437

• Manufacturer: Davis-Standard

Davis Standard 1/4″ tubing extrusion line including the following equipment:A. Davis Standard / Killion model KN-100 1.00″ 24:1 L/D extruder having a three (3) zone electrically heated, air cooled non-vented barr...