Used Construction in Poland

Plastic plywood Panel for formworks 2500x1250
- Manufacturer: Baukrane
Shuttering Panel Plastic is made of high quality polypropylene. It is adjusted to international construction standards. This product is characterized by high rigidity, heat resistant, corrosion resistant and has ...
Poland
2012 Terax Ta 30 Technological dumper
- Manufacturer: Terax Ta 30
Do sprzedania Wozidło technologiczne Terax Ta 30 z 2012 roku w dobrym stanie ilość MTH 12 400
Kolonia Bilew, Poland
Beam with secured ends, BT20 for slab formworks 1.90-4.50m
- Manufacturer: Baukrane
The BT20 formwork beam is the basic component of slab formwork and specialised wall formwork. Depending on the application, it can work in horizontal and vertical position. It is designed to transfer point or lin...
Poland
Formwork BT20 Beam with Secured ends
- Manufacturer: Baukrane
The BT20 formwork beam is the basic component of slab formwork and specialised wall formwork. Depending on the application, it can work in horizontal and vertical position. It is designed to transfer point or lin...
Poland
Formwork Beam BT20 ECO - 1.90-4.90m
- Manufacturer: Baukrane
The BT20 formwork beam is the basic component of slab formwork and specialised wall formwork. Depending on the application, it can work in horizontal and vertical position. It is designed to transfer point or lin...
Poland
Galvanized prop for slab formworks, DB ECO 20kN
- Manufacturer: Baukrane
Ceiling supports with adjustable height and thread for its precise adjustment - which makes it possible to use them for building ceilings of different heights. Equipped with protection against hand injury. The s...
Poland
Ceiling Formwork - Painted Prop 10kN 3.0-5.0m
- Manufacturer: Baukrane
The adjustable steel prop is designed to transfer vertical compressive loads in temporary slab props and both beam and panel slab formwork. It consists of two tubes: the internal and external one, equipped with a...
Poland
Nuts 70, 100mm, 120x120 DW15
- Manufacturer: Baukrane
Nuts may be applied to tie formwork panels with the use of tie rods type DW15 and to connect accessories with wall and slab formwork. Nuts Ø70 and Ø100 are cast in malleable white cast iron and protected by a zi...
Poland
Smart beam for slab formworks BT20
- Manufacturer: Baukrane
The BT20 Smartbeam is a cost-effective, lightweight, full-width, wrought-iron formwork beam. It is distinguished by its low weight and chamfered ends with polyurethane protection by dip coated method. The BT20 i...
Poland
Baudeck Slab formwork - aluminium panels
- Manufacturer: Baukrane
The Baudeck modular slab formwork is a lightweight and universal formwork for a wide variety of use, especially for large-scale constructons. The size of the Baudeck elements makes the system useful for both smal...
Poland
Smart beam BT20 with polyurethane protection
- Manufacturer: Baukrane
The BT20 Smartbeam is a cost-effective, lightweight, full-width, wrought-iron formwork beam. It is distinguished by its low weight and chamfered ends with polyurethane protection by dip coated method. The BT20 i...
Poland
BAUPROP Slab Formwork Prop 20kN 300-550cm
- Manufacturer: Baukrane
The Bauprop 20 steel prop with a smooth height adjustment and a self-cleaning thread has been designed to transfer vertical compressive loads in temporary slab props, as well as beam and panel formwork. It consi...
Poland
Clips/Clamp connect formwork panels like Tekko, Bautekk
- Manufacturer: Baukrane
Bautekk Clamp it’s a one-piece connector used to join adjacent panels. A tension and compression proof panel connection is achieved by using two Bautekk clamps. They must be inserted and then hammered down to be...
Poland
DW15 Nuts 70mm, 100mm 120x120mm - Tie rods
- Manufacturer: Baukrane
Nuts may be applied to tie formwork panels with the use of tie rods type DW15 and to connect accessories with wall and slab formwork. Nuts Ø70 and Ø100 are cast in malleable white cast iron and protected by a zi...
Poland
Formwork Ceiling Prop 10kN 300/360cm - Galvanised
- Manufacturer: Baukrane
GALVANIZED PROP 300/360 10kN. The adjustable steel prop is designed to transfer vertical compressive loads in temporary slab props and both beam and panel slab formwork. It consists of two tubes: the internal an...
Poland
Bobcat E19 Excavator
- Manufacturer: Bobcat
- Model: E19
Good condition Bobcat E19 Excavators manufactured in 2015. Located in Poland and other countries. Click request price for more information.
Poland