Used Construction in Poland

2012 Terax Ta 30 Technological dumper
- Manufacturer: Terax Ta 30
Do sprzedania Wozidło technologiczne Terax Ta 30 z 2012 roku w dobrym stanie ilość MTH 12 400
Kolonia Bilew, Poland
Formwork beam BT20 ECO
- Manufacturer: Baukrane
The BT20 formwork beam is the basic component of slab formwork and specialised wall formwork. Depending on the application, it can work in horizontal and vertical position. It is designed to transfer point or lin...
Poland
Panel 3-SO 3-plywood for slab formworks
- Manufacturer: Baukrane
The 3-SO Panel is a three-ply panel, available in small- and big format, offers a high dimensional tolerance and angle accuracy. The special surface finish and the marginal ridge have proven high resistance. Reli...
Poland
H20 beam for slab formworks
- Manufacturer: Baukrane
The H20 formwork beam is intended to work as a component of a traditional slab formwork or specialised wall formwork. It is made in the form of a beam, with I-section cross-section, with full web. The beam compon...
Poland
Bauprop 20kN Solid steel prop for slab formworks
- Manufacturer: Baukrane
The Bauprop 20 steel prop with a smooth height adjustment and a self-cleaning thread has been designed to transfer vertical compressive loads in temporary slab props, as well as beam and panel formwork. It consi...
Poland
Ceiling Formwork - Galvanised Prop 10kN 300/360cm
- Manufacturer: Baukrane
GALVANIZED PROP 300/360 10kN. The adjustable steel prop is designed to transfer vertical compressive loads in temporary slab props and both beam and panel slab formwork. It consists of two tubes: the internal an...
Poland
Steel prop 10kN for slab formworks
- Manufacturer: Baukrane
GALVANIZED PROP 300/360 10kN. The adjustable steel prop is designed to transfer vertical compressive loads in temporary slab props and both beam and panel slab formwork. It consists of two tubes: the internal an...
Poland
Wedge clamp to formworks panels (Rasto, MidiBOX, RHINO, Bauframe)
- Manufacturer: Rhino
The steel formwork clamp is designed to connect system panels in frame wall formwork systems. This lightweight and universal wedge clamps allows two adjacent formwork panels to be directly connected with each ot...
Poland
Baudeck Slab formwork - Aluminium panels compatible with Topec
- Manufacturer: Baukrane
The Baudeck modular slab formwork is a lightweight and universal formwork for a wide variety of use, especially for large-scale constructons. The size of the Baudeck elements makes the system useful for both smal...
Poland
Nut D70, D100, 120x120 (Tie Rods type DW15)
- Manufacturer: Baukrane
Nuts may be applied to tie formwork panels with the use of tie rods type DW15 and to connect accessories with wall and slab formwork. Nuts Ø70 and Ø100 are cast in malleable white cast iron and protected by a zi...
Poland
Shole Fluid Develop OCL Oil for formworks
- Manufacturer: Shole
Shole fluid to prevent concrete from sticking to the formwork. It has a barrier and chemical effect, which allows you to achieve an aesthetic concrete surface. It does not leave discoloration and minimizes the am...
Poland
Slab Formwork Prop 20kN Galvanised BAUPROP 4,0 - 5,5m
- Manufacturer: Baukrane
The Bauprop 20 steel prop with a smooth height adjustment and a self-cleaning thread has been designed to transfer vertical compressive loads in temporary slab props, as well as beam and panel formwork. It consi...
Poland
Connector used to join panels in Tekko, Bautekk, MiniBox Formworks
- Manufacturer: Baukrane
Bautekk Clamp it’s a one-piece connector used to join adjacent panels. A tension and compression proof panel connection is achieved by using two Bautekk clamps. They must be inserted and then hammered down to be...
Poland
3-Plywood Panels 3-SO for slab formworks
- Manufacturer: Baukrane
The 3-SO Panel is a three-ply panel, available in small- and big format, offers a high dimensional tolerance and angle accuracy. The special surface finish and the marginal ridge have proven high resistance. Reli...
Poland
Baudeck Aluminium Slab formwork compatible with Topec, Ready Sets
- Manufacturer: Baukrane
The Baudeck modular slab formwork is a lightweight and universal formwork for a wide variety of use, especially for large-scale constructons. The size of the Baudeck elements makes the system useful for both smal...
Poland
Atlas-Copco ECM 660 Drilling Rig
- Manufacturer: Atlas-Copco
- Model: ECM 660
Good condition Atlas-Copco ECM 660 Drilling Rigs manufactured in 2014. Located in USA and other countries. Click request price for more information.
USA