Used Processing in British Columbia, Canada

Comact DDM10 Line

• Manufacturer: Comact

- 10 years old - Approx. 120' V-flite conveyor including drive and attached control devices - Flying log turner - new HD upgrade 2011-12? (Quad roll) - DDM10 full profile machine, 480 volt - All drive units, moto...

16" x 39" Roots High Pressure Blower

• Manufacturer: Roots

- Top in, bottom out - Inlet volume 46005 - Driver and driven poly chain pulleys c/w belt - No motor - Silencer and piping not included

SUTORBILT 713V-4500 BLOWER

- rebuilt

50 HP Low Pressure Blower

- 44" fan - Decent shape - 460 volt - Good for up to 20,000 CFM

Holman Screw Air Compressor

• Manufacturer: Holman

- 150 HP motor, 440 volt, 1770 RPM

1 MMBTU/Hr. 48" x 16' Sour Lineheater - 15565

• Manufacturer: Larsen & D'Amico

Rating (btu/hr): 1,000,000 | Diameter: 48" | Length: 16' | Preheat coil: 3" 1500 ANSI RTJ Sour PWHT & 100% x-ray | Reheat coil: 3" 900 ANSI RTJ Sour PWHT & 100% x-ray | Insulation: Insulated & Metal Clad | Bms: ...

2015 10" Dual Horizontal Sandfilter A/B 15' Long

• Manufacturer: Dynacorp

Misc type: Filters | Misc item title: 10" Dual Horizontal Sandfilter A/B | Listing title additional text: 15' Long | Dimensions: 10" X 15' Long | Pressure: 3,000 PSI | Pasc condition rating: A | Condition detail...

75BBL Flare Knockout Vessel 14.9 PSI - 15781

• Manufacturer: GLM

Basic FKO vessel, 14.9 PSI Capacity (bbl): 75BBL | Design pressure: 14.9 | Orientation: Horizontal | Service: Sour | Diameter: 5' | Length: 20' | Inlet: 4" | Outlet: 4" | Building: none | Skid: none

Lunden Stacker System - Right Hand

• Manufacturer: Lunden

- Package size 48" wide x 72" tall - Bar type unscrambler - Accumulation chains - Even ending chain fence - Lunden stacker (no stick placer) - Boxing forks to create a fixed package width - Take away chain transf...

LSI Stacker c/w Stick Placer

• Manufacturer: LSI

- Right hand - 8' to 20' - 54" wide x 48" high package - 1-1/2" wide x 3/4" thick x 54" long stickers - Five (5) chainways c/w electric drive - Six (6) forks c/w linear positioner actuator - Five (5) arm hoist c/...

20' Rollcase (Approx.)

• Manufacturer: Canadian Mill Equipment

- Seven (7) 8" diameter x 34" face bedrolls c/w double single chain drive mounted onto a channel frame - No drive unit

24' Rollcase

• Manufacturer: Canadian Mill Equipment

- Pop up c/w air bags - Rolls are approximately 48" wide - Approximately 24' long - No drive

25' Rollcase (Approx.)

• Manufacturer: Canadian Mill Equipment

- Eight (8) 6" diameter x 36" wide bedrolls (2-3/16" shafts) - c/w RC80 double single drive chain mounted onto a channel frame c/w legs - 4' centers - No drive unit

Comact Scan Conveyor

• Manufacturer: Comact

- 4" diameter to 12" diameter, up to 16' long - V-Flight scan conveyor, approx. 50' long c/w electric drive - Does not include any controls or scanning - Ready to load

56" x 60" Gruendler Hammer Hog

• Manufacturer: Gruendler

- Opening is 56" wide x 60" long - 900 HP @ 2300 Volt, 3 phase, 60 hertz - Twenty (20) hammers, weight approx. 190 lbs each - c/w spare hammers and grates - Loaded on a truck