Used Processing in British Columbia, Canada

2009 460VAC MCC

• Manufacturer: PLATINUM ENERGY SERVICES

Pasc condition rating: B | Skidded: Yes | Housed: Yes | Connection status: Connected | Voltage ac: 460VAC | Building heated: Yes | Mcc title: 460VAC

2005 500 USG Double Wall Sales Tank

• Manufacturer: De-In Industries

500 gallons TANK AST DW WATER C-020-A Package id: 12227870 | Service type: Sweet | Pasc condition rating: B | Connection status: Connected | Capacity: 500 USG | Capacity(unit of measure): Gallon | Capacity(use se...

2009 1.5 MMBTU/hr Sour Line Heater

Packager: RJU | Service type: Sour | Pasc condition rating: B | Skidded: Yes | Housed: Yes | Connection status: Connected | Heater type (indirect): Line Heater | Coil diameter: 3" | Coil diameter(unit of measure...

2000 400 bbl Fuel Tank

• Manufacturer: Argo

Used for Diesel Pasc condition rating: B | Skidded: Yes | Housed: No | Connection status: Connected | Capacity: 400 bbl | Capacity(unit of measure): bbl | Capacity(use selected unit of measure as display unit): f...

20' Hemco Trimmer

• Manufacturer: Hemco

- Board dealer c/w 6 strand 81X, motor & drive - good condition - Trimmer - Left hand, 11 saws, 22" diameter carbide, 7 HP on "0" saw, 5 HP on all others, 11 cylinders, 9 air actuators. Will pass 24 ft board. Inf...

30' Rollcase (Approx.)

• Manufacturer: Canadian Mill Equipment

- Nine (9) 8" diameter x 26" face bedrolls c/w double single chain drive mounted onto a channel frame - No drive unit

8' x 40' Pel-Pro Single Pass Dryer

• Manufacturer: Pel-Pro

- 20 HP drive - ID of burner is 42" - ID of the heater is 54" x 18' long - PEL-PRO 8’ x 40’ Single-pass Drum-dryer c/w Drive unit. All is in good condition - The burner information: GP Combustion Equipment Inc.; ...

Hammer Hog System

- 21" x 36" opening - 250 HP, 1200 RPM, 460 volt motor c/w soft start - Screen has approx. 4" x 2" openings - Six (6) rows of hammers c/w spare set - 24" wide x approx. 16' long belt conveyor c/w MDI metal detect...

PEI Four (4) Canister TCO (New)

• Manufacturer: PEI

Fabricated TCO components - Base hopper sections - Mid sections - Retention chamber components - 72" diameter inlet header duct, approximately 60' - 80" diameter outlet header duct, approximately 60' - 74" diamet...

'V' Flight Scan Conveyor

- Manufactured by SawQuip - Approx. 42' c/c head and tail sprockets - H124 chain c/w flights every 24" - Head shaft assembly (no drive) - Tail shaft assembly

Belt Head & Tail Drum

44' Dynamic Action Vibrating Conveyor

• Manufacturer: Dynamic Action

- Balanced - c/w sheave but no motor - 24" wide (narrows down to 18" at the transition end) - Would require a new transition piece

30" x 135' Troughing Conveyor

- Truss frame construction c/w catwalk (Approx. 7' wide x 4'-4" high) - Three (3) sections (32'-6", 55'-6" and 48'-0") - Tail pulley assembly - No head pulley on drive - Belt

16" x 48" Radar High Pressure Blower

• Manufacturer: Radar

- Series 3200 - Displacement 16.7 - c/w silencer on top of blower

Lunden Stacker System - Right Hand

• Manufacturer: Lunden

- Package size 48" wide x 72" tall - Bar type unscrambler - Accumulation chains - Even ending chain fence - Lunden stacker (no stick placer) - Boxing forks to create a fixed package width - Take away chain transf...