- Trusted Seller
1986 PLATARG 612
- Manufacturer: PLATARG
12 Rams and (1 Slave- TBD) Full follow cams Wedge adjustable type rams Stroke of Cams: 4.25" or 107mm Depth of draw (Shell Height): 2" or 50mm Transfer slide - none Platarg type Zig-Zag Feeder - material input fr...
Niederhelfenschwil, Switzerland - Trusted Seller
2025 PLATARG 312 HS
- Manufacturer: PLATARG
Object: 48610 | Controls: BECKHOFF | Number of slide actions: 13 | Slide force: 3 to | Stroke: 60 mm | Stroke rate (max.): 210 /min | Slide adjustment: 6 mm | Variable speed: yes | Stroke rate (min.): 70 /m...
Niederhelfenschwil, Switzerland - Trusted Seller
1968 PLATARG 912
- Manufacturer: PLATARG
Platarg 912 ICOP Transfer Press 6.5" Stroke - 3.15" Max Part Length * Strip and Release on the Stripper Forks * 11 Stripper forks included * Full Set of Bottom Cams with Kick up lever style * Oil Cup Lube on Top ...
Niederhelfenschwil, Switzerland - Trusted Seller
1971 PLATARG 611
- Manufacturer: PLATARG
Platarg transfer press 611 Specifications: Number of stations: 12 (11+1) Capacity per ram: 6 tons Maximum stroke: 114 mm Max. shell height: 50 mm Standard ram pitch: 82 mm Blank diameter: 80 mm
Niederhelfenschwil, Switzerland - Trusted Seller
1987 PLATARG 912
- Manufacturer: PLATARG
The press is now in storage - was in a full running state when taken out of service. High lift stroke cams 159 mm - max. shell height 76 mm 13 Stations, 12 Rams + 1 Slave Wedge Adjustable Rams with Standard Male ...
Niederhelfenschwil, Switzerland - Trusted Seller
1997 BMV T1/250/22-11/150-300/380
- Manufacturer: BMV
Object: 48337 | Drive system: eccentric / crank | Number of suspensions: 2 | Number of slide actions: 1 | Slide ejectors / cushion: yes | Table cushion: yes | Feedstock transport direction: left to right | Total...
Niederhelfenschwil, Switzerland - Trusted Seller
1996 PLATARG 2513
- Manufacturer: PLATARG
Can be tested in operation Max. Flywheel speed: 760 1/min. Capacity on one stage approx. 25T Clutch engagement max. 10/min Air pressure 5.5 bar (min) - 5.8 bar (max) Total deceleration time Braking <250 ms Zig...
Niederhelfenschwil, Switzerland - Trusted Seller
1977 PLATARG 611
- Manufacturer: PLATARG
A new electrical control system and a mechanical and lubrication rebuild are required. One used PLATARG model 611 transfer press, high speed type. Full follow cams. Number of stations: 12 Number of rams: 11 + 1 s...
Niederhelfenschwil, Switzerland - Trusted Seller
1969 PLATARG 312
- Manufacturer: PLATARG
This machine can have the following installed/added to it (not included) o new lubrication o new electrical installation o new protections o CE conformity Number of station 13 (12+1). Capacity on any one station ...
Niederhelfenschwil, Switzerland - Trusted Seller
2000 BENELLI 650T/3MR/2/12/3750X1100/LD/ET3
- Manufacturer: Benelli
Press equipped with 2 feeing lines - one from the side for blank cutting in transfer mode and one in line for for progressive die operation.
Niederhelfenschwil, Switzerland - Trusted Seller
2005 ARKU RM 50X/9 ECOPLAN
- Manufacturer: Arku
Cut-To-Length line consisting of: - Coil loading chair HUBTEX - ARKU single-sided decoiler - ARKU VRM 5050/9 feed straightening machine, +- 0.1 mm feeding precision - measuring wheel to verify feed length - Cut-t...
Niederhelfenschwil, Switzerland - Trusted Seller
1996 IMS 80 RE
- Manufacturer: IMS
Object: 53951 | Drive system: eccentric / crank | Total force (nominal): 80 to | Table surface (left-right): 560 mm | Table surface (front-back): 376 mm | Spigot hole diameter: 50 mm | Stroke: 110 mm | Stro...
Niederhelfenschwil, Switzerland - Trusted Seller
Niederhelfenschwil, Switzerland - Trusted Seller
2020 ZANI SM90 K1 -09-50
- Manufacturer: ZANI
Object: 42740 | Drive system: servomechanic | Openings in uprights: yes | Number of slide actions: 1 | Table cushion: yes | Total force (nominal): 90 to | Table surface (left-right): 900 mm | Stroke: 500 mm |...
Niederhelfenschwil, Switzerland - Trusted Seller
1965 RICHTER PEKR-200
- Manufacturer: RICHTER
Complete technical documentation available Object: 39805 | Drive system: eccentric / crank | Total force (nominal): 200 to | Table surface (left-right): 1100 mm | Table surface (front-back): 740 mm | Stroke ad...
Niederhelfenschwil, Switzerland
Tip: Enter manufacturer, model or keyword