- Trusted Seller
1988 PLATARG 912
- Manufacturer: PLATARG
1 station from 336º to 242º stroke 77 mm 2 station from 278º to 110º stroke 111 mm 3 station from 284º to 110º stroke 124 mm 4-12 station from 284º to 110º stroke 154 mm Shell height max 154/2 = 77 mm Ejector str...
Niederhelfenschwil, Switzerland - Trusted Seller
2015 HS AUTOMATION MS41OL
- Manufacturer: HS AUTOMATION
- Hydraulic spreading process - Reel drive three-phase motor - Tape loop control Pull-off via preset pressure or via loop control - Coil stop arms 6 pieces with quick clamping system - Protective device against t...
Niederhelfenschwil, Switzerland - Trusted Seller
2007 SCHMID HSR400
- Manufacturer: Schmid
- Model: HSR400
including coil line SARONNI with direct feed - hydraulic opening for cleaning - band guides at outlet - proportional pressure reducer for drive rollers
Niederhelfenschwil, Switzerland - Trusted Seller
1978 FEINTOOL GKP F 250
- Manufacturer: FEINTOOL
Located in Barcelona - Spain Installation space of the tools Front passage between the columns: Movable: 560 mm Fixed: 560 mm Side passage between the columns: Movable: 270 mm Fixed: 270 mm Tool height: Movable: ...
Niederhelfenschwil, Switzerland - Trusted Seller
FEINTOOL GKP 250
- Manufacturer: FEINTOOL
Complete refurbished fineblanking press: * disassembly into individual parts * findings of all components (crack test) * overhaul of the drive * overhaul of the guides * overhaul of the impression cylinders * ove...
Niederhelfenschwil, Switzerland - Trusted Seller
2023 FEINTOOL FB ONE 11000
- Manufacturer: FEINTOOL
Absolutely mint condition: just 3'300 running hours, 700'000 strokes Special equipment fineblanking press: + block hydraulics for 4th and 5th force. High pressure 30-270 bar. + mechanical reamers (without tool-bo...
Niederhelfenschwil, Switzerland - Trusted Seller
Niederhelfenschwil, Switzerland - Trusted Seller
2002 FEINTOOL HFA 8800 PLUS
- Manufacturer: FEINTOOL
Object: 36813 | Total force (nominal): 880 to | Stroke: 40 mm | Cutting velocity min.: 5 mm/s | Cutting velocity max.: 70 mm/s | Closing velocity: 200 mm/s | Returning velocity: 200 mm/s | Nominal force: 6...
Niederhelfenschwil, Switzerland - Trusted Seller
1971 FEINTOOL GKP 50/80
- Manufacturer: FEINTOOL
Press can be inspect under power. Feeder with hydr. motor.
Niederhelfenschwil, Switzerland - Trusted Seller
1968 FEINTOOL GKP 50/80
- Manufacturer: FEINTOOL
Object: 32057 | Total force (nominal): 80 to | Stroke: 50 mm | Stroke rate (min.): 28 /min | Stroke rate (max.): 72 /min | Nominal force: 12 to | Lower table (left-right): 420 mm | Lower table (front-back)...
Niederhelfenschwil, Switzerland - Trusted Seller
1981 FEINTOOL GKP F 40
- Manufacturer: FEINTOOL
Object: 32359 | Drive system: knuckle-joint | Frame design: H-frame, monoblock | Total force (nominal): 40 to | Stroke: 45 mm | Stroke rate (max.): 90 /min | Lower table (left-right): 280 mm | Lower table (f...
Niederhelfenschwil, Switzerland - Trusted Seller
1971 FEINTOOL GKP F 50/80
- Manufacturer: FEINTOOL
Example of an overhauled Feintool GKP 50/80 which can be applied to a machine we have in stock
Niederhelfenschwil, Switzerland - Trusted Seller
1999 SCHMID HSR500
- Manufacturer: Schmid
Press is equipped with 4. force Straightener SCHMID Loop control GSW SCHWALBE new in 2016
Niederhelfenschwil, Switzerland - Trusted Seller
1972 FEINTOOL GKP F 100/160
- Manufacturer: FEINTOOL
Object: 49648 | Drive system: knuckle-joint | Frame design: H-frame, monoblock | Total force (nominal): 160 to | Stroke: 13 mm | Stroke rate (max.): 72 /min | Nominal force: 50 to | Lower table (left-right):...
Niederhelfenschwil, Switzerland - Trusted Seller
2007 FEINTOOL (SCHMID) HSR 1000 ECO
- Manufacturer: Schmid
SIEMENS S7 300 controls Control Panel SIEMENS Panel PC 477B Switch on hours acc. to counter : 62'000 h Total strokes acc. to counter: 3 Mio including Coil line SCHMID HR 12
Niederhelfenschwil, Switzerland
Tip: Enter manufacturer, model or keyword