Used separators in Wallonia, Belgium

Centrie + Moteur - DK0468.WG

Chromite sand separation plant GUT., 4-stage

• Manufacturer: G.U.T.

With Siemens panel With pneumatic sand conveyor 18´% Quarz sand separation in 4 stages: Composed of: 1 x silo, 60t with cooler and magnetic particle separator 2 x sandconveyor 1 x silo, 25t, state 2-4

Separating - vibrating convoyer 3200×1600mm

• Manufacturer: Zewe

Dimensions: Länge: 3300mm; Breite: 2330mm; Höhe: 2100mm Usable dimensions: Länge: 3200mm ; Breite: 1600mm Motor: Brand: Friedrich ; Type: F930-6-4/2; 2×2,7 KW; 220/380V; 960r/min up substructure and 4 spiral spri...

Hydraulic separating wedge DISA TK-3/300

• Manufacturer: DISA

With control panel With spring balancer Max working pressure: 300bar | Stroke of the wedge: 100mm | Jaws lenght: 265mm | Min wedge tip retracted: 26mm | Max wedge tip extended: 48mm | Cutting force: 20500daN | Hy...

Moulding plant HWS-HSP1 550mm x 670mm x 150/200mm

• Manufacturer: HWS

SEIATSU airflow-pression moulding process Roller lift Tilting roller conveyor for inserting cores Boxes are clamped manually SIEMENS S7 control system and control panel Manual transfer and turning to the casting ...

Shake-out grid 4000 mm x 2000 mm ( twin)

• Manufacturer: Bedford

2 x motor WEG, 11 kW, 380/660 V, 1460 rpm With unbalanced axle, motor with belt drive Underframe with springs (16 pcs.), for twin grate

Gravity die casting machine for mould separate in 4 parts

Dimensions: Length: 2650mm; Width: 900mm; Height: 2700mm For multi-part moulds (2 to 4-part moulds) Useful height: min ±380mm; max: ±1000mm With hydraulic unit With ejector on the bottom

Gravity die casting machine for mould separate in 4 parts

Dimensions: Length: 2950mm; Width: 1000mm; Height: 2650mm Without clamping plates Hight adjustable side clamping without gides For multi-part moulds (2 to 4-part moulds) Mould height: min ±300mm; max: ± 900mm Wit...

Gravity die casting machine for mould separate in more parts, manual and pneumatic

Dimensions: Length: 1700mm; Width: 1400mm; Height: 2350mm 4 jaws manually adjustable on table by thread Upper jaw is pneumatically driven and operable

Laboratory treatment furnace RESCAL, 1200 °C

• Manufacturer: RESCAL

With thermostat up to 1200 °C With timer With ventilation and alarm, can be switched on separately

Sand silo, divided in 2; ±6m³

Silo divided into 2 with 2 separate outlets On 3 feet

Dust filter 105.000 m³/h MÜNSTERMANN

• Manufacturer: MÜNSTERMANN

560 filter hose Filter with 2 separate filter bodies Possibility for pressure less cleaning 400V; 3ph; 50Hz With spark separator With pneumatic shut-off dampers With pneumatic cleaning With screw discharge With 2...

Vertical screw conveyor, Ø 5500 mm

Able to work vertically It is carried by trapezoid without reducer It can be separated in the middle In very good condition

Reclaiming plant for furan sand, 5 t/h

• Manufacturer: G.U.T. /CYRUS

consisting of: - shake out, 2350 mm x 1850 mm, with cabinet - vibrating conveyor - magnet separator (overbelt) - bucket elevator - silo 50 t - attrition unit CYRUS, motor 5,5 kW, 400 V, 960 rpm - oscillating scre...

Sand silo 35 m³

Cone 2400 x 500 mm With framework not very high Without extraction belt which is sold separately