Used separators in Wallonia, Belgium

Chromite sand separation plant GUT., 4-stage

• Manufacturer: G.U.T.

With Siemens panel With pneumatic sand conveyor 18´% Quarz sand separation in 4 stages: Composed of: 1 x silo, 60t with cooler and magnetic particle separator 2 x sandconveyor 1 x silo, 25t, state 2-4

Separating - vibrating convoyer 3200×1600mm

• Manufacturer: Zewe

Dimensions: Länge: 3300mm; Breite: 2330mm; Höhe: 2100mm Usable dimensions: Länge: 3200mm ; Breite: 1600mm Motor: Brand: Friedrich ; Type: F930-6-4/2; 2×2,7 KW; 220/380V; 960r/min up substructure and 4 spiral spri...

Hydraulic separating wedge DISA TK-3/300

• Manufacturer: DISA

With control panel With spring balancer Max working pressure: 300bar | Stroke of the wedge: 100mm | Jaws lenght: 265mm | Min wedge tip retracted: 26mm | Max wedge tip extended: 48mm | Cutting force: 20500daN | Hy...

Shake-out grid 4000 mm x 2000 mm ( twin)

• Manufacturer: Bedford

2 x motor WEG, 11 kW, 380/660 V, 1460 rpm With unbalanced axle, motor with belt drive Underframe with springs (16 pcs.), for twin grate

Gravity die casting machine for mould separate in 4 parts

Dimensions: Length: 2650mm; Width: 900mm; Height: 2700mm For multi-part moulds (2 to 4-part moulds) Useful height: min ±380mm; max: ±1000mm With hydraulic unit With ejector on the bottom

Gravity die casting machine for mould separate in 4 parts

Dimensions: Length: 2950mm; Width: 1000mm; Height: 2650mm Without clamping plates Hight adjustable side clamping without gides For multi-part moulds (2 to 4-part moulds) Mould height: min ±300mm; max: ± 900mm Wit...

Gravity die casting machine for mould separate in more parts, manual and pneumatic

Dimensions: Length: 1700mm; Width: 1400mm; Height: 2350mm 4 jaws manually adjustable on table by thread Upper jaw is pneumatically driven and operable

Sand silo, divided in 2; ±6m³

Silo divided into 2 with 2 separate outlets On 3 feet

Reclaiming plant for furan sand, 5 t/h

• Manufacturer: G.U.T. /CYRUS

consisting of: - shake out, 2350 mm x 1850 mm, with cabinet - vibrating conveyor - magnet separator (overbelt) - bucket elevator - silo 50 t - attrition unit CYRUS, motor 5,5 kW, 400 V, 960 rpm - oscillating scre...

Sand silo 35 m³

Cone 2400 x 500 mm With framework not very high Without extraction belt which is sold separately

Sandbunker 35 m³

Cone length 500 mm Sith framework not very high Without extraction belt which is sold separately

1992 Amine Gas Washer BGT, 20 000 m³/h

With collection tray With exhaust With coarse separator, 2m x 2m x 1,6m

Loading band, 3500 mm x 500 mm

External dimensions: length 4000 mm, width 1450 mm, hauteur 2150 mm With small loading hopper, on feet V-belt drive, separated gear box

1989 Semi-automatic moulding plant HWS-HSP-2

• Manufacturer: HWS-Sinto

With sand hopper and extraction belt With turning table With roll-over With two-hand control board SIEMENS S5 With mould assembly station With transfer trolley With push-out station With vibrating separation channel

1991 Permanent overband magnet, width 700mm

• Manufacturer: Axmann

Motor: 2,2 kW, 380 V, brand BAUER, 50 Hz, type: drum motor Overhead magnetic separator With belt tension With supervision With cover plate made off stainless steel With suspension device