Used Marine Equipment in Norway

Rope, Fiber, 64 mm - 83 Te - SuperTEC

• Manufacturer: Supertec

Fiber Rope for mooring etc. total length 190 m. Floating. New. SuperTEC ® is the strongest rope among Polypropylene and Polyolefin ropes. For the Same breaking strength a smaller size of SuperTEC ® can be used. S...

T.B.A. Wire rope, 24 mm x 205 m

• Manufacturer: T.B.A.

1 ea 205 meter, 24mm, Steel Wire rope, 48.7 T MBL, Unused Surplus

1988 Svendborg Steering Systems Type KF 20

• Manufacturer: Svendborg

Mooring winch, 20 Tons, with HPU, Svendborg Steering Systems Type KF 20, no spooling device HPU with 87 kW el. motor Constant tension Dimension: w: 2,1 x L: 3,1 x H: 2,2 m Drawings and some documentation availab...

Strømsnes Mekaniske AS Sheave, Umbilcal or Cable - 34 Te SWL

• Manufacturer: Strømsnes Mekaniske AS

Guide Sheaves for umbilical, cable or flexible pipe. SWL 34 Te In very good condition.

Liebherr Counterweights

• Manufacturer: Liebherr

Proof Load Weights of Steel for load testing of cranes, davits, derricks, winches or other lifting equipment, 15 Te each The 15 each 22 Te test weights are furnished with certified lifting lugs. Can also be used...

Polclain Hydraulics France MOTEUR 2000 CC 16

• Manufacturer: Poclain

Hydraulic Tugger winches, rated pull 4 Te at 300 bar. Poclain. Constant tension. Used in good condition.

Swivel, Lifting, 100 Te SWL

100 Te SWL Swivel for lifting winch, Can be used with crane block or snatch block for lifting- or hauling operations.

2009 Ronneby Transport and Installation Carousel

• Manufacturer: Ronneby

Carousel, 500 Te SWL, can be lifted as basket with 500 Te pay load, Ø 15030 mm diameter, 480 m3, suitable for offshore work, Cables, Umbilicals, Flowlines. Short mobilization time. *) Please refer to attached dra...

Twin Disc MG-5091SC

• Manufacturer: Twin Disc
• Model: MG-5091SC

Twin Disc MG-5091SC Marine Transmission Arrangement number: S-11790 | Rotation direction: CCW - Counter clockwise seen from aft | Gear type: FP - normal reverse gear for fixed propeller blades | Gear ratio: 2,95:...

ZF 325-1A

• Manufacturer: ZF
• Model: 325-1A

ZF 325-1A ZF325-1A Two identical gears in stock 7 degrees downward angle on output shaft kW rpm: Pleasure .259 kW/rpm Light duty .234 kW/rpm Medium duty .177 kW/rpm Continuous duty .155 kW/rpm With or without oil...

1992 REINTJES WVS 430

• Manufacturer: Reintjes

REINTJES WVS 430 REINTJES WVS 430. WVS's gearboxes have been specially designed for fast vessels such as naval units, patrol boats, yachts and other vessels with similarly high performance demands. Reintjes have ...

1968 Ulstein Propeller 55GSC

• Manufacturer: Ulstein

Ulstein 55GSC Gear type: Non Reversing Gearbox CPP - to be used with controllable pitch propeller | Gear ratio: 5:1

2003 Mekanord 580HS

• Manufacturer: Mekanord

Mekanord 580HS Servo for CP Propeller: Max force = 730 kN Max stroke = 190 mm Gearbox: • Built-in servo system for CP propeller Compact design Large economical reduction ratio 1 PTOs with own hydraulic clutch Rig...

1986 Reintjes VAL 2250 HR

• Manufacturer: Reintjes

Reintjes VAL 2250 HR Performance specification: Admissible input torque: 15471 Nm | Hp: 2150 | Kw: 1581 | Rpm: Input speed: 1000 rpm, Output speed 202 rpm | Rotation direction: Engine CW - Propeller side CCW | We...

1986 Reintjes VAL 2250 HL

• Manufacturer: Reintjes

Reintjes VAL 2250 HL Performance specification: Admissible input torque: 15471 Nm | Hp: 2150 | Kw: 1581 | Rpm: Input speed: 1000 rpm, Output speed 202 rpm | Rotation direction: Engine CCW - Propeller side CW | We...