New Processing in Veneto, Italy

N-CPST Conveyor with paddle separator

Paddle separator installation on a mod. N-CPTR conveyor is the most frequent application. This configuration is identical to model N-CPST Standard configuration with unloading chute, separator on the left and dou...

N-CPTR Conveyor with direction change

Anodized ALU profile structure (thickness 15 Microns) Alloy 6060 with h 50 mm built-in non-removable side panels Standard configuration with central base complete with gas pistons and padlockable switch/motor pro...

CP Smart Compact series with direction change

• Manufacturer: MB Conveyors

Anodized ALU profile structure (thickness 15 Microns) Alloy 6060 with h 35 mm built-in non-removable side panels The new housings design with aluminum cogwheel insert allows to adjust the inclination more quickly...

PA ROBOT Robot-assisted flat conveyor

Made of structural aluminum profile, 45 × 25 mm section, anodized Panels in 5-mm thick transparent Polycarbonate Standard equipment: – Opening rear door protected by micro-switch – Exit tunnel from robot lowering...

T100 Standard flat conveyor

Anodized ALU profile structure (thickness 15 Microns) Alloy 6060 The std conveyor configuration features h 40 mm side panels and switch/motor protector + cable and plug Standard cut-proof, oil-proof belt with smo...

CP 21 Fixed incline conveyor with direction change

Anodized ALU profile structure (thickness 15 Microns) Alloy 6060 with h 65 mm built-in non-removable side panels Sturdy conveyor featuring 40° fixed incline angle in the standard configuration; also available wit...

T50 Compact flat conveyor

Anodized ALU profile structure (thickness 15 Microns) Alloy 6060 50-mm diameter drive roller Standard configuration without legs (floor-mounted supports and side panels can be installed as optionals) and electric...

T-CONVEYOR Container filling system for preforms

The T-Conveyor is designed for: – Collecting products from the IMM – Conveying and storing in purpose-made containers – Quantity management by counting the moulding cycles Solution proposed when there is less ris...

CPT TP Conveyor with direction change and plastic belt

• Manufacturer: MB Conveyors

Anodized ALU profile structure (thickness 15 Microns) Alloy 6060 with h 60 mm built-in side panels Standard MB plastic belt with h 400 mm slats, 400 mm pitch. Slightly textured surface, h 16 mm side edges, comple...

CPT TM Metal belt conveyor

Anodized ALU profile structure (thickness 15 Microns) Alloy 6060 with h 60 mm built-in side panels Standard MB metal belt with slightly textured surface and side edges, h 20/30 mm slats and 400 mm pitch Belt deta...

SR Independent separator with roller drum

• Manufacturer: MB Conveyors

Standard equipment: – MB Control unit to adjust the rotation speed – safety protection for rotary drum rotation screwed to the structure Separator with its own MB WAVE CONTROL panel for adjusting the rotation spe...

N-SRS Single roller separators

• Manufacturer: MB Conveyors

The separator roller is driven by the gearmotor of the conveyor and drive is transmitted by means of a PU belt Thanks to the elasticity of the belt, the distance between separator roller and conveyor can be adjus...

FSRV PLUS Independent separators

• Manufacturer: MB Conveyors

Loading and unloading height, and inclination of the separator chute in AISI 304 stainless steel sheet can be adjusted by means of gas pistons Spiral roller fixed at both ends for the utmost accuracy and perfect ...

RUF Idle roller conveyor

Anodized ALU profile structure (thickness 15 Microns) Alloy 6060 Standard configuration with h 40 or 80 mm side panels 20 / 30 / 50 / 76 / 100 / 113 mm diameter galvanized steel rollers, mounted at variable pitch...

MONTI ANTONIO L05SPB

• Manufacturer: Monti

Calender for effects, foil and MICRO DOTS of rolls (synthetic leather) and pieces (leather), with hydraulic EXTERNAL pressing cylinder Ø HEATING CYLINDER 500 mm – 19,69 inch HEATING CYLINDER WIDTH 2000 mm – 78.74...