Used Veneer Machines

DENNIS VENEER TAPE MACHINE

• Manufacturer: Dennis

DENNIS VENEER TAPE MACHINE S/-5030 Standard Specifications: *Additional specifications available upon request* *Additional photos available upon request*

Furniertechnik LZM 1400 Veneer Splicer Stock #10367

• Manufacturer: Furniertechnik

Furniertechnik Model LZM1400 Veneer Longitudinal Splicer Throat Depth 57" Heating Zone Length 1000mm (39") Max. Temp. 446 Deg. F. Push-Button Controls on Swiveling Control Panel Serial No. LZM0170

Veneer Equipment - Complete Department

Complete Veneer Department 1) Orma 6 x 12 Hot Press with Operator Controls 2) Adolf Pferffer Radial Arm Cut Saw 3) Viggo Larsen 13' W Guillotine with Operator Controls 4) Glue Clamp 5) Diehl 890WA Stitcher /...

Josting EFS 3600 Veneer Guillotine

This is a really hard to find Josting EFS 3600 Veneer Guillotine with a cutting length of 3600 mm. It has a stacking height/insertion height of 100 mm. Marking of the cutting line is by directional light. We did ...

SEYBOLD 56" VENEER GUILLOTINE CLIPPER

SEYBOLD 56" VENEER GUILLOTINE CLIPPER S/N:15142, (460/60/3 electrics), H-2162 Standard Specifications: *Inquire for additional specifications"

Fisher & Ruckle Impetum 1200 Longitudinal Veneer Splicer (2021) Stock #2835

• Manufacturer: Fisher & Ruckle

Fisher & Ruckle Model Impetum 1200 Longitudinal Veneer Splicer Veneer Specifications: 3mm Thickness Capacity Foot Pedal Remote Integrated Glue Pot Chilling Unit Memory Recall Control System. Wired for 400 V 3ph B...

RFS Protech PT7 Veneer Former

• Manufacturer: Pro-Tech

The RFS Protech PT7 Radius Former uses a series of machined rails supporting dual sets of heavy aluminum arms, which are adjusted to define the pattern to be fabricated. The Veneer Slats are clamped to the form a...

Fischer & Ruckle Omnimaster Plus Veneer Splicer

• Manufacturer: Fischer

Technical specifications[Opening width](https://wtp.hoechsmann.com/en/lexikon/20472/opening_width)1.200 mm Veneer thickness min0,4 mm Veneer thickness max1,5 mm Strip width min45 mm Strip width max1.200 mm F...

Fisher + Ruckle Veneer Longitudinal Splicer FZK

• Manufacturer: Fisher + Ruckle

Fisher + Ruckle Veneer Longitudinal Splicer FZK Good Condition Runs Well

Fisher+Ruckle FZR-15 Crossfeed Splicing Machine Stock #10368

• Manufacturer: Fisher+Ruckle

Fisher+Ruckle Model FZR-15 Crossfeed Splicing Machine Effective Length of Heating Zone 1536mm ( 60") Throughput Speed 33m/min. (108 Ft/Min) Maximum Nominal Output / Machine Cycles - 30 Cycles/min Average Producti...

2006 FISHER RUCKLE EM34 VENEER SPLICING MACHINE

• Manufacturer: FISHER RUCKLE

2006 FISHER RUCKLE EM34 VENEER SPLICING MACHINE Manufacturer: M+S Brugg AG Model: EM-34 Mfg Date: 2006 Power: 400v, 60hz, 3ph CSA Hours: 12,693 Machine Type: Veneer splicing machine (crossfeed) Splicing T...

Wintersteiger DSG 150/201 Eco Thin Cutting Frame Saw Stock #9236

• Manufacturer: Wintersteiger

Wintersteiger DSG 150/201 Eco Thin Cutting Frame Saw Side and center guides are equipped to saw two blocks simultaneously Feed speed 1-5 FPM 450 Strokes / min Cutting Height & Width. Cutting width (side guide) 60...

SAVI HFK-250 VENEER GUILLOTINE [VC-010457]

• Manufacturer: Savi

SAVI HFK-250 Veneer Guillotine; General Specs: -- 102.4" (2,600 mm) Width cap., 4" daylight opening, hydraulically operated knife, 4 HP Leroy-Somer motor powers hydraulic unit with reservoir. -- Originally fitted...