Used Veneer Machines

Northtech GlueEasy 3000C Veneer Edge Trimming & Glue Applicator

The GlueEasy C-Series machines are manufactured to provide precise and reliable 90° glued veneer edges on thick veneers. Unlike traditional hand-gluing methods, the veneer pack is placed vertically and clamped ti...

Northtech NT UltiMate 2800 Series Crossfeed Veneer Splicer

The NT UltiMate 2800 Series Crossfeed Veneer Splicer is designed to create glue-spliced joints on long and panel-sized veneer faces. Veneer bundles can be well-cut straight with double knife guillotines and then ...

Northtech NT UltiMate 1500 Series Crossfeed Veneer Splicer

The NT UltiMate 1500 Series Crossfeed Veneer Splicer is designed to create glue-spliced joints on long and panel-sized veneer faces. Veneer bundles can be well-cut straight with double knife guillotines and then ...

Northtech NT CutMate 700C Cross-Cut Veneer Clipper

The NT CutMate 700C cross-cut veneer clipper is used for cutting veneer across its grain. All INNOVATOR guillotines are expertly manufactured with European quality and safety standards thanks to a partnership wit...

SAVI TFK-700 Cross Cut Veneer Clipper

• Manufacturer: Savi

This is a hard to find machine and they haven’t changed all that much over the years. 700mm/27.5″ capacity. Hydraulic movement of blade with dual palms for safety. 3kW(4 HP), 220-240/440-480V/3-phase pump motor. ...

RFS Protech PT7 Veneer Former

• Manufacturer: Pro-Tech

The RFS Protech PT7 Radius Former uses a series of machined rails supporting dual sets of heavy aluminum arms, which are adjusted to define the pattern to be fabricated. The Veneer Slats are clamped to the form a...

Northtech NT UltiMate 3400 Series Crossfeed Veneer Splicer

The NT UltiMate 3400 Series Crossfeed Veneer Splicer is designed to create glue-spliced joints on long and panel-sized veneer faces. Veneer bundles can be well-cut straight with double knife guillotines and then ...

Fischer & Ruckle Omnimaster Plus Veneer Splicer

• Manufacturer: Fischer

Technical specifications[Opening width](https://wtp.hoechsmann.com/en/lexikon/20472/opening_width)1.200 mm Veneer thickness min0,4 mm Veneer thickness max1,5 mm Strip width min45 mm Strip width max1.200 mm F...

Fisher + Ruckle Veneer Longitudinal Splicer FZK

• Manufacturer: Fisher + Ruckle

Fisher + Ruckle Veneer Longitudinal Splicer FZK Good Condition Runs Well

Fisher+Ruckle FZR-15 Crossfeed Splicing Machine Stock #10368

• Manufacturer: Fisher+Ruckle

Fisher+Ruckle Model FZR-15 Crossfeed Splicing Machine Effective Length of Heating Zone 1536mm ( 60") Throughput Speed 33m/min. (108 Ft/Min) Maximum Nominal Output / Machine Cycles - 30 Cycles/min Average Producti...

2006 FISHER RUCKLE EM34 VENEER SPLICING MACHINE

• Manufacturer: FISHER RUCKLE

2006 FISHER RUCKLE EM34 VENEER SPLICING MACHINE Manufacturer: M+S Brugg AG Model: EM-34 Mfg Date: 2006 Power: 400v, 60hz, 3ph CSA Hours: 12,693 Machine Type: Veneer splicing machine (crossfeed) Splicing T...

Northtech NT ERD 3400 Series Edge Reinforcing Device

This NT ERD 3400 Series Edge Reinforcing Device tapes veneer sheets with paper and simultaneously cuts off the waste. Operators can even adjust the width of trimming heads to fit the size of veneer faces as their...

Northtech NT ERD 2800 Series Edge Reinforcing Device

NT ERD 2800 Series Edge Reinforcing Device tapes veneer sheets with paper and simultaneously cuts off the waste. Operators can even adjust the width of trimming heads to fit the size of veneer faces as their requ...