Used Conveyors in West Virginia, USA

12" Dia. Spirac Spiroline Shaftless Spiral Screw Conveyor – 36' long

• Manufacturer: Spirac Inc.

Designed for difficult to transport materials and higher loading/fill rates. 304 stainless steel U-trough with cover and a 16" square inlet chute. Trough is a two-section assembly with a 36'-0" length between end...

9" dia. Orthman Stainless Steel Screw Feeder Conveyor - Center Feed

• Manufacturer: Orthman

Stainless steel U-trough with foot-mounted end plates Trough length is 72" between the discharge centers, 96" length between end plates with Two sections of trough covering with inspection doors and 18" long shro...

24" wide Stainless Steel Plastic link Sanitary Cleated Incline Conveyor

All stainless steel support frame on a 45° incline (will require additional structural support) Inlet hopper measures 26"W X 27"L, 38" from floor elev. Discharge height is approximately 89" from floor elevation S...

Heat and Control 58"W Minuteman Accumulation Conveyor CV-BT Food Processing

• Manufacturer: BT

Sanitary vinyl seamless belting on a free-standing stainless steel frame Syncronized fill and discharge rates or fill and discharge product at once Side-mounted operator control station 36"W X 29'-6"L Top Belt (A...

CI Conveyors Inc 11" Dia. X 20'-9"L Mild Steel Industrial Screw Auger 3HP

• Manufacturer: Conveyors Inc.

Carbon steel U-trough, used previously on a 30° incline. Auger: Ø11" continuous length, shrouded with bolt-on cover Trough Length: 20'-9" Inlet: 10" square flange at 30° Outlet: 12" X 13" square flange 3HP helica...

12"dia. X 14' L Orthman Industrial Screw Auger Conveyor

• Manufacturer: Orthman

All carbon steel construction. Two-section u-trough with foot mounts and bolted top covering. Trough length is 15'-10" between endplates, with a working length of approximately 14'. Twin inlets are flared to a 22...

12"dia. X 14' L Orthman Industrial Screw Auger Conveyor

• Manufacturer: Orthman

All carbon steel construction. Two-section u-trough with foot mounts and bolted top covering. Trough length is 15'-10" between endplates, with a working length of approximately 14'. Twin inlets are flared to a 22...

12" Stainless Steel Cleated Incline Loading Belt Conveyor - 84" Ht.

Stainless steel sheet cladded loading hopper with a capacity of approximately 20 cubic foot Hopper is polycarbonate covered with 20" hinged White vinyl belt is 11.75" wide with 2" split cleats spaced at 12" on a ...

12" W x 13' L Stainless Steel Plastic Link Belt Conveyor

• Manufacturer: Link-Belt

12" W x 13' L Stainless Steel Plastic Link Belt Conveyor 16.5" Between guides 30" Belt to Floor 25" Clearance Under Frame .75 HP Motor, 1700 RPM, 208/360V, 3 Phase, Continuous Duty Overall dimensions: 170x36x24"...

Screw Conveyor U-trough auger Industrial 9" Dia x 18' L

Carbon steel construction. Flanged U-trough with sectional top cover. Length between conveyor endplates: 18'-4". Product Discharge: 10" square flange Unknown HP with belt drive and shaft-mount speed reducer. Max....

24"W X 16' FMC FoodTech Stainless Steel Vibrating Pan Conveyor

• Manufacturer: JBT

Stainless steel pan with flat bottom, 5" sides, and a 48"H drop-off end discharge. Pan installed with 8" long removable mesh screen for undersized product (7/8" mesh). Conveyor Speed: 890RPM with a 0.41" stroke H...

12" wide Incline Belt Conveyor

ITEM #: 19078 Used 12" wide Incline Belt Conveyor Stainless steel frame and leg supportsPlastic modular belt with textured surface on inclineLoading leg of conveyor is 57" long and sits 13" from floor elevation9°...

7"W X 23'-5"L Galvanized Single Chain Drag Conveyor

• Manufacturer: Roth Manufacturing Co.

Great for feed handling/conveying Formed galvanized housing with flared trough Paddles are reinforced neoprene 2" high and spaced to 13" with metal backing 1HP belt drive Supply: 208-230/460V, 60Hz, 3 phase

23" dia. X 31' long Stainless Steel Industrial Screw Auger Conveyor

Stainless steel flat-bottom trough with formed 8" bevels and double-flanged edges. New, unused UHMW wear strips installed in middle of trough bottom. Trough construction is 3/16" thick stainless sheet and measure...

23" dia. X 31' long Stainless Steel Industrial Screw Auger Conveyor

Stainless steel flat-bottom trough has formed 8" bevelled corners and double-flanged edges. New, unused UHMW wear strips installed in middle of trough bottom. No hanger bearing design. Trough construction is 3/1...