Used Conveyors in West Virginia, USA

12" Diameter X 5.5 ft Long Tubular Screw Auger Feeder Conveyor

All carbon steel tubular housing with hinged & gasketed clamshell bottom drop-out & safety switch Product Inlet/Discharge: Ø12" flanged Housing length is 6'-11" between endplates, 5'-6" between inlet/discharge ce...

24" Wide X 14' Long Eriez Electro-Magnetic Vibrating Feeder Conveyor

• Manufacturer: Eriez

Two Electro-Magnetic Drives. Model 98B, 460 VOLT, 60 Hz, 17.5 Amps per drive. (No controller included). S/N-93068-3, Bolted 1/2" thick abrasion resistant liner. Designed for cable suspension. Overall Dime...

KEY TECHNOLOGY 24"W X 15'L VIBRATORY CONVEYOR DISTRIBUTION SHAKER

• Manufacturer: Key Technologies

MODEL NUMBER: 418405, SERIAL NUMBER: 94-31768, MAX. STROKE: 5.5, MAX CAPACITY: 10,000LBS/HOUR. POWERED BY A 1HP, 208-230/460VOLT, 1725RPM, 60HZ, 3PH, BALDOR MOTOR. ● DOCUMENTATION INCLUDED: GENERAL ARRANGEMENT D...

Triple/S Dynamics Sanitary Horizontal Differential Conveyor - 12"W X 11'L

• Manufacturer: Triple S Dynamics, Inc.

Horizontal motion conveyor, suspended overhead 12" wide conveyor tray with 4" sidewall, double flanged (10 ga. polished stainless steel) 2HP washdown-duty drive unit provides gentle, non-impact conveying motion A...

Stainless Steel 12"W Cleated Incline Belt Conveyor 6'-3" Disch. Ht

Stainless steel in-feed hopper (6-8 cu/ft) with hinged, polycarbonate cover Hopper dimensions: 38"W X 43"L X 43"H Reinforced vinyl belt with 2" cleats on 12" centers Stainless steel conveyor cladding 1/3HP worm g...

20" Wide X 8' Long Stainless Steel Slider Bed Flat Belt Conveyor

Smooth vinyl belt with reinforced backing and underside treading Belt measures 8'-2" between pulley centers and is 38" off floor elevation Belt is 3" below top of conveyor frame Welded mild steel frame assembly 1...

4" dia. Flexicon Stainless Steel Jacketed Screw Conveyor - 10'-6" long

• Manufacturer: Flexicon

Rigid tubular housing (approximately 10'-6" between inlet/outlet centers) Two-zone jacket with a total length of 8' and 1 1/4"NPT media connections Screw Type: 1/2"Ø stainless steel round bar helical (best for dr...

22" W Stainless Z-Frame Incline Plastic Belt Scoop-flight Sanitary Conveyor

All stainless steel conveyor frame with stainless steel components 22" long loading leg with 26" clearance from floor Approximate 79° incline onto a 32" long unloading leg with a discharge height of 99" Conveyor ...

12" Dia. X 17' Long Industrial Carbon Steel Screw Auger Conveyor

3HP Baldor Severe Duty TEFC 213T Electric Motor, 460 Volt 460 Volts, 3 phase AC 4.5 Amps Belt drive with guard. Auger speed = 46 RPM.

9" dia. Mild Steel U-trough Auger Screw Conveyor 24'-10"L

All mild steel construction. Flanged U-trough, three sections with bushed hangers at mid-connections. Length between conveyor endplates: 24'-10" Product Discharge: 9" square flange 3HP belt drive and shaft-mount ...

Stainless Steel Cleated Flex-wall Belt Conveyor 12"W X 25'L

Stainless steel slider-bed belt conveyor frame with four sets of legs brackets (legs not included). Vinyl belt with 18.5" width, 11.5" wide between flexwalls, 1.5" cleats spaced at 3.75". Pulleys: 5.75" diameter ...

11"wide X 12'L Stainless Steel Incline Portable Sanitary Belt Conveyor

All stainless steel conveyor frame and adjustable incline stand Sliding conveyor bed design with 2.5" side guides Height of discharge: adjustable from 49" to 59" Right-angle drop chute 1/2 HP underside-mounted dr...

1HP Hobart Stainless Steel Vertical Auger Screw Conveyor Model SC-90-56

• Manufacturer: Hobart

Product inlet of the SC-90 is designed to attach with a Hobart, size 56 mixer/grinder. Vertical auger housing has full-length hinged clamshell panel. Discharge elevation is 76" (56'.5" with drop chute, 360° rotat...

14"W X 23'L Stainless Steel Vibratory Vibrating Pan Shaker Conveyor

Heavy-duty flanged trough, 3.5" sides with beveled corners (1/4" thick stainless steel) Mild steel base frame assembly measuring 32.25"W X 25'-5"L 24" long sloped loading pan Extension legs & fabricated pedestals...

9" dia. X 8' long Industrial Stainless Steel Screw Feeder Auger Conveyor

Flanged, U-trough with foot-mounting on the end plates Flanged center discharge (blanked) and oversized flange on end discharge 2HP belt drive with guard and torque-arm speed reducer Power required: 230/460V, 60H...