Used Granulators & Pelletizers in Illinois, USA

NELMOR G1436MB SHEET FEED GRANULATOR 16953

• Manufacturer: Nelmor

Nelmor model G1436MB granulator. S/N 9604-37866. 14″ x 36″ feed throat, 3 knife solid rotor, 2 bed knife, 100HP 230/460V 1,770 RPM motor, wire for 460V. MB series heavy duty out-board bearing design. 8″ OD right ...

IRWIN CHESAW CH-LH 28.7-04 GRANULATOR 12597

• Manufacturer: Irwin

Irwin Chesaw type CH-LH 28.7-04 granulator, S/N 7915, 5″ x 33″ rotor cutter, 15HP 208-230/460V 1,760 RPM through a fan cooled 10:1 gearbox. Lincoln auto-lube system, evacuated by a 5HP 208-230/460V 3,460 RPM blow...

NEW CUMBERLAND 1837B GRANULATOR 50510-23002

• Manufacturer: Cumberland

New Cumberland 1837B granulator, S/N 50510-23002, 2024 model year, 18″ x 37″ feed throat, 3 knife high shear rotor, 2 bed knife, 100 HP 230/460-Volt 1800 RPM motor, conveyor in-feed hopper, belt drive, 6″ right h...

ACCRAPAK SYSTEMS LAB PELLETIZER 18126

One (1) used Accrapak Systems model 750/1B laboratory strand pelletizer. 1″ entrance. 24 knife solid helical rotor. 1 HP drive motor. Includes 4″ air knife. S/N 5288-9-95

GRANULATOR FEED ROLLS 6929

Used granulator feed rolls. 41.5″ wide x 4.5″ knurled steel feed rolls powered by a 2HP 1,750 RPM 230V/460V motor into a 15:1 gearbox. Rolls are chain and sprocket driven.

IRWIN CHESAW CH-LH 28.7-04 GRANULATOR 12598

• Manufacturer: Irwin

Irwin Chesaw type CS-LH 28.7-04 granulator, no serial number, 5″ x 33″ rotor cutter, 15HP 208-230/460V 1,760 RPM motor through a fan cooled 10:1 gearbox. Lincoln auto-lube system, evacuated by a 4″ auger system, ...

HERBOLD SMS45/160-H5-2 FEED ROLL GRANULATOR 16612

• Manufacturer: Herbold

Herbold model SMS45/160H5, two (2 granulators, S/N 3696 (x2). 23.5″ x 61″ feed throat, belt driven 5 knife open rotor, 2 bed knife, 100HP 230/460V motor. . there is a 11-3/4″ x 30″ parts chute granulator chamber ...

NELMOR RF1215M1 GRANULATOR W/SIDE MOUNTED 17472

• Manufacturer: Nelmor

Nelmor model RG1215M1 granulator, S/N 8001-14279, 12″ x 15″ feed throat, 3 knife solid rotor, 2 bed knife, 20 HP 230/460-volt motor, insulated tray feed hopper and body panels, hydraulic jack back assisted hopper...

NEW CUMBERLAND 1837B GRANULATOR New 37B

• Manufacturer: Cumberland

New Cumberland model 1837B granulator, S/N 50510-24002, 18″ x 37″ feed throat, 3 knife high shear rotor, 2 bed knife, 100 HP 460V 1,775 RPM motor, conveyor in-feed hopper, 8″ airveyor discharge, mounted on a 22″ ...

CALIFORNIA PELLET MILL CONDITIONER 17333

• Manufacturer: California Pellet Mill

One (1) California Pellet Mill conditioner for use with a pellet mill. Mixing section measures approximately 28″ in diameter x 8′ long. Unit is belt driven by approximately a 15 HP motor through a gear reducer

KILLION 2″ WIDE 20KN PELLETIZER 18691

One (1) used Killion strand pelletizer. S/N 10000F. 2″ wide entrance with 20 knife carbide tipped rotor. Pneumatically actuated top feed roll. Rotor and pull rolls driven by a 1 HP D/C motor through a gearbox wit...

ACCRAPAK 750/1 36KN PELLETIZER 18662

One (1) used Accrapak model 750/1 laboratory strand pelletizer. S/N 6005-10-98. 2″ wide entrance. 36 knife solid helical rotor. 1.5 HP drive motor for rotor. Separate drive motor for the pull rolls. Both motors h...

CUMBERLAND 2050B GRANULATOR 10407

• Manufacturer: Cumberland

Rebuilt Cumberland model 2050B granulator, no S/N. 20″ x 50″ feed throat, new 3 knife high shear rotor, 2 bed knife, one raised. 150HP 460V motor, standard OEM style conveyor feed hopper, drop down screen cradle,...

LAB TECH 20KN LAB PELLETIZER 18664

One (1) used Lab Tech model 1110-120/VS laboratory strand pelletizer. 2″ wide entrance. 20 knife solid helical rotor. .75 kw drive motor for rotor. Separate .37 kw drive motor for pull rolls. Both motor with inve...

CARVER 4350L LAB PELLET PRESS 18853

• Manufacturer: Carver

Carver Inc. model 4350L bench top laboratory pellet press. S/N 4350-1159. 12-ton clamping force. 0″ to 5.5″ daylight opening. 5-1/8″ stroke. 3.5″ round top platen. 0-24,000 lb. analog pressure gauge. Manual hydra...