Used Granulators & Pelletizers in Illinois, USA

Herbold Granulator. 15.5" x 15.5" feed opening

• Manufacturer: Herbold

53890001 Used Herbold Granulator. 15.5" x 15.5" feed opening; (3) complete sets of (9) blades w/ (17) spares; 3 complete sets of (2) counter blades w/ (5) spares; 6mm and 9.5mm screens. Approx. OAD: 8.9' L x 5.3'...

Fluid Air Fluid Bed Dryer Granulator

• Manufacturer: Fluid Air
• Model: 0020

46981001 Used Fluid Air Fluid Bed Dryer Granulator, Model 0020. 316 Stainless steel product contact parts, currently set up with dryer chamber, chamber designed to handle Wurster coating with change parts, electr...

Farrel Continuous Compounding Line – Mixer, Extruder, Strand Pelletizer

• Manufacturer: Farrel

53759003 Used Farrel Continuous Compounding Line, consisting of: Farrel Continuous Mixer, Model 6 FCM-UM, Built 1985. Farrel 10" Dump Extruder, 9 to 1 L/D Ratio, with Hydraulic Ram Stuffer on feed throat, 10" dia...

BALL & JEWEL HAF-812-SCX AUGER 10537

• Manufacturer: Ball & Jewell

Ball & Jewel model HAF-812-SCX auger granulator, S/N 991-C-2322. 8″ x 12″ feed throat, 3 knife rotor, 2 bed knife cutting chamber, 5HP 460V only motor. 3HP 460V only auger motor, 8″ x 20″ auger in-feed area. Unit...

GRANUTEC 66MM2.5 4928

Granutec model 66MM.2.5 auger granulator, S/N 185.379. 3 knife open rotor, 2 bed knife cutting chamber, 3HP 460V motor. 6″ x 17″ auger area, top mounted sterling AL4 blower discharge with 2″ OD outlet. Complete w...

NELMOR AG88M 5253

• Manufacturer: Nelmor

Nelmor model AG88M auger granulator, S/N 9405-33290. 8″ x 8″ feed throat, 3 knife solid rotor, 2 bed knife cutting chamber, 2HP 230/460V rotor motor. 1HP 230/460V auger motor, 22″ x 5″ auger opening 2″ OD vacuum ...

SCHEER SGS-50EL 2″ 20 KNIFE 17922

• Manufacturer: Scheer

One (1) used 2″ Scheer Model SGS-50-EL strand pelletizer. S/N 10050017. Nominal 2″ wide entrance. Has 20 knife carbide inlay helical style rotor driven by an A/C motor with variable speed controller. Mounted on c...

BALL & JEWEL HAF1620SCS AUGER 14505

• Manufacturer: Ball & Jewell

Ball and Jewel model HAF1620SCS auger granulator, S/N 01A04380. 16″ x 20″ feed throat, 2 bed knife cutting chamber, 25HP 230/460V motor 12″ diameter x 66″ long auger in-feed to granulator end hopper in-feed to au...

CUMBERLAND 3250 36 KNIFE HOG 18633

• Manufacturer: Cumberland

Cumberland model 3250 hog granulator. S/N 57050-754-R. 32″ x 50″ feed throat. 36 knife hog rotor, 2 bed knife (4 pcs raised one side). Dual fly-wheels. Belt driven rotor powered by a 250 HP 885 RPM 460-volt motor...

SCHEER BAY COMPANY B20-P LONG 14589

• Manufacturer: Scheer

Scheer Bay Company model B20-P long fiber pelletizer, S/N B20P-0103. 20″ wide angle cut 6 knife rotor with two 10″ wide knives per position. 460V/3ph/60Hz operation, complete with a stand-alone control panel. A s...

CUMBERLAND 3715H HOG CUTTING CHAMBER 19024

• Manufacturer: Cumberland

Cumberland model 3715H granulator cutting chamber only. 18″ x 37″ feed throat. 15 knife hog rotor with one bed knife in standard position and one raised. Includes flywheel, screen, and all safety interlocks.

POLYMER 912 7303

Polymer 912 auguer granulator, S/N 912A15879. 10″ x 30″ auger, 7.5HP motor. 3 knife rotor, 2 bed knife cutting chamber

POLYMER 812 1061

Polymer 812 auger granulator, S/N none. 8 x 12 feed throat, 10 x 30 auger area, 2 knife fly solid rotor, 1 bed knife cutting chamber 7.5HP. Vacuum take off discharge. Mounted on casters, complete with starter, an...

CUMBERLAND 2050H HOG CUTTING CHAMBER 18744

• Manufacturer: Cumberland

Cumberland model 2050H cutting chamber only. S/N 551000-86001. 20″ x 50″ feed throat. 18 knife hog rotor. 2 bed knives (4 pcs) with one in the raised position. Includes rotor drive pulley & bushing.Can also be pu...

PROCESS CONTROL 12 X 15 18804

Used Process Control film Granulator. 12″ x 15″ feed throat. Belt driven rotor by a 30 HP 230/460 volt 1770 RPM motor. Approximately 11″ wide front mounted feed roll system in-feed with additional 2 HP ASR film f...