Used process engineering

88 in. x 28 ft. Cedarapids Portable Counterflow Dryer

• Manufacturer: Cedarapids

-Nominal 88” x 28’ shell -Reported in good condition -50 HP Cradle Chain Drive with a heavy-duty Concentric Shaft type gear reducer -Right Hand Discharge (from burner end) -Maxon Type 592 Burner -Genco Genie Semi...

New Wemco-Style Round Tank Flotation cells

• Manufacturer: Wemco

- New round tank flotation cells - Made to order in North America - Complete with mechanism - All necessary cell and mechanism parts coated with protective 520 natural rubber (including discharge flume) - Feed, u...

Triple Start Spiral Concentrators

Triple Start Spiral Concentrators - Effective and low-cost solution for gravity separation - 24 units available - "Triple start” type - They accept up to 3 different streams of feed - Includes distributors and la...

300 Sq Ft model 30 US Filter Auto Jet Leaf Filter

• Manufacturer: US Filter

- 300 Sq Ft pressure leaf filter - Auto Jet - Made by US Filter - Self cleaning - 316 stainless steel - Approximately 25 cubic foot capacity, 700 gallons - 54 x 60 inch drum - 150 PSI and 200F rating - 10 inch di...

New Denver-style Sub-A flotation cell mechanisms

- Drop-in replacement of Denver Sub-A flotation mechanism - Complete mechanism with rubber coated standpipe and wear parts - Interchangeable with original Denver Equipment Company mechanisms - Made in North Ameri...

Model 120 Wemco Flotation Cell Mechanisms and Tanks

• Manufacturer: Wemco

- Wemco model 120 Flotation cell mechanisms and tanks - Rubber and Polyurethane wear parts - Removed and ready for inspection or shipment - Available as bare mechanisms for spares, or as complete used cells with ...

100 Cu. Ft. MinPro flotation cells

- 32 cells available; 1 bank of 12, 2 banks of 10 - 100 cubic feet per cell - Cleaned, painted, tested - Rubber and bearings in good condition - Motors, belts, and pulleys included - - Launder boxes required - Pr...

Wemco 164 Flotation Mechanisms

• Manufacturer: Wemco

Wemco model 164 Flotation Mechanisms - For 1,000 cubic foot square tank - Rubber wear parts - Removed and in storage - Operates with 100 HP motor (used, included) - 3 units available - Offered as is - EX works st...

Denver Flotation Mechanisms

Denver Flotation Mechanisms 2 units, approx. 8 ft long - Urethane 27.5 in. diameter rotors and 36 in. diameter stators - 30 in. diameter 4 belt sheaves 23 units, approx. 6' long - Urethane 27.5 in. diameter rotor...

Flotation Level Control

Flotation Level Control Systems: Automated flotation tank level control through automated darrt valve actuator - Rosemount differential pressure sensor flange mounted to cells - Fisher Type 657 diaphragm actuator...

18 x 30 ft (5.5 x 9.1 m) Outotec SAG Mill with 6300 HP (4697 kW) motor

• Manufacturer: Larox

18 x 30 ft ( 5.5 x 9.15 m) Outotec SAG Mill with 6032 HP (4500 kW) motor: - Unused surplus. - Made in 2013. - Includes: Lube system, feed chute, trommel, instrumentation, inching drive, and mill liners. Enclosure...

New Unused Krebs style Cyclones Made to Order

- New and unused cyclones made to order in Krebs and Denver styles - Fully assembled - Interior covered with 1/4 inch thick vulcanized rubber - Victaulic connections for feed and discharge - Variety of Apex and I...

18 x 10.5 ft (5.5 x 3.2 m) Fuller FLS SAG mill with 1,500 HP

SAG mill, 18 ft diameter, 10.5 ft length. - Manufactured by Fuller 1995 - Rubber-lined, used rubber liners included - 1500 HP, 4160 volt, 1192 RPM, continuous motor, 5010 frame Motor, rebuilt and inspected. - Sp...

12 x 5 ft Outotec Unused Surplus SAG Mill with 350 HP

• Manufacturer: Larox

- Unused surplus Meso Outotec SAG mill - Still in factory packaging - Delivered, never installed or used - 12.1 ft diameter (3.7 m) - 5 ft length (1.5 m) - Trunnion supported mill with ring and pinion gearset - 3...

20 x 10 ft (6.1 x 3.05 m) ANI FLSmidth SAG Mill with 2,500 HP

• Manufacturer: FLSmidth

- 20 ft diameter by 10 ft shell (6.1 x 3.05 meter) - Manufactured by ANI/FLS - Includes WEG 2,500 HP motor - Enclosed gear drive made by David Brown - Inching drive - Mill is currently operational and installed -...