Used Welding Equipment in Bavaria, Germany

Foot for distance bracket D28 200 x 200 mm

Connecting element between U-shaped spacer bracket or 3D welding table and support and foundation rail. Different mounting heights can be adapted to the workpiece by simply exchanging the table feet Incl. 2x fitt...

Spacer C-Form Alu-Titanium

in high-strength aluminium-titanium alloy, thus approx. 60 % weight saving approx. 10 % higher bending strength compared to cast iron Table extension between two 3D welding tables can be firmly screwed together w...

Telescopic foot D28

Pendulum feet, ± 30 mm fine adjustable Stable M30 threaded spindle Foot sleeve protects threaded spindle from dirt and prevents jamming of hose package Adjustment range telescope 350 mm in 50 mm steps For flexibl...

Merkle RedMIG 1600 K

• Manufacturer: Merkle
• Amperage: 16 ampere

1 welding torch SB 157 G, 3 mtr. long 1 piece earth cable 4 mtr long, 25 qmm 1 argon pressure reducer with 2 pressure gauges 1 roll of welding wire, D-300 spool, 5 kg 1 can of anti-adhesion spray 1 hand protectio...

Clever toolbox with bottom pin

Ingenious, a well thought-out retractable accessory box! Space-saving, time-saving, gentle on tools and lockable. Fastening of the "clever toolbox" via connecting sleeves on the side stanchion. Retrofitting of ol...

Closure flap, Ø 44 mm

Protects the system holes from dirt Can be easily removed with magnet D28-10003-002

Vertical clamp with adapter and countersunk screw

with open holding arm and horizontal foot ergonomic, oil-resistant handle with large hand rest and soft component safety clamping piece with finger protection anti-loss device for the pressure screw at the end of...

Adapter for quick release with countersunk screw

Adapter for mounting standard quick release skewers Scope of delivery: 1x adapter, 4x hexagon head screw M6 x 12, 1x countersunk screw M16 x 30

Stop and positioning pin D28

For pinning the system parts As position fixing, e.g. for angles or stops, to replace a second clamping bolt at low cost Burnished Due to system bore D16 in the head also suitable for use as adapter for screw cla...

Connecting sleeve D28 short with collar

Use as a long-term connection For connecting two system components Suitable for system bore / oblong hole Clamping by means of Allen key SW 10

Connecting frame D28 1000 x 1000 x 600 mm

Precise positioning of 3D work tables in longitudinal and transverse direction on the support and foundation rail possible Very stable design for extremely high loads Further sizes on request!

Mounting lever

suitable for clamping and releasing PS bolts D28-06001-000 and PPS bolts D28-06025-000 for easy removal of PS bolts and PPS bolts Handle also serves for pre-centering

Ground connection for D16, D22 and D28

fits into any system hole 100 % contact, therefore no overheating of the ground cable >> high efficiency for cable cross section 50 - 70 mm², for loads up to 355 A at 100 % duty cycle, 400 A at 60 % duty cycle si...

Tool wall for mounting on wall and table

creates an overview and order at the workplace the tool wall can either be mounted on the table System parts not included

Socket pin Side

Socket pin