Adapter for quick release with countersunk screw
Adapter for mounting standard quick release skewers Scope of delivery: 1x adapter, 4x hexagon head screw M6 x 12, 1x countersunk screw M16 x 30
Heimertingen, Germany
Stop and positioning pin D28
For pinning the system parts As position fixing, e.g. for angles or stops, to replace a second clamping bolt at low cost Burnished Due to system bore D16 in the head also suitable for use as adapter for screw cla...
Heimertingen, Germany
Connecting sleeve D28 short with collar
Use as a long-term connection For connecting two system components Suitable for system bore / oblong hole Clamping by means of Allen key SW 10
Heimertingen, Germany
Connecting frame D28 1000 x 1000 x 600 mm
Precise positioning of 3D work tables in longitudinal and transverse direction on the support and foundation rail possible Very stable design for extremely high loads Further sizes on request!
Heimertingen, Germany
Mounting lever
suitable for clamping and releasing PS bolts D28-06001-000 and PPS bolts D28-06025-000 for easy removal of PS bolts and PPS bolts Handle also serves for pre-centering
Heimertingen, Germany
Ground connection for D16, D22 and D28
fits into any system hole 100 % contact, therefore no overheating of the ground cable >> high efficiency for cable cross section 50 - 70 mm², for loads up to 355 A at 100 % duty cycle, 400 A at 60 % duty cycle si...
Heimertingen, Germany
Tool wall for mounting on wall and table
creates an overview and order at the workplace the tool wall can either be mounted on the table System parts not included
Heimertingen, Germany
Heimertingen, Germany
Heimertingen, Germany
Heimertingen, Germany
Heimertingen, Germany
Pressure booster
For doubling or quadrupling the pneumatic clamping forces: Pressure booster 2 : 1 max. 20 bar Pressure booster 4 : 1 max. 41 bar incl. couplings and hoses
Heimertingen, Germany
Pneumatic Clamp S
single acting pneumatic cylinder with pressure spring return and 3/2 directional control valve suitable in all D28 bores stroke 30 mm force: F 6 =41 N at 6 bar F 8 =117 N at 8 bar F 10 =193 N at 10 bar F 20 =573 ...
Heimertingen, Germany
2-point tensioner with adapter
Positioning and clamping in one operationExplanation: The combination clamp converts the movement of the lever arm into a horizontal and vertical clamping movement, whereby the workpiece is positioned and clamped...
Heimertingen, Germany
Push Rod Tensioner-Uni
long push rod guide with fastening thread and nut ergonomic, oil-resistant handle with large hand rest and soft component with tempered, galvanized pressure screw 32 mm stroke incl. universal stop with thread for...
Heimertingen, Germany
Tip: Enter manufacturer, model or keyword