Used Welding Equipment in Bavaria, Germany

Interface plate for clamping tubes D28 to D16
Interface between System 28 and System 16 A in mm: 150 | B in mm: 50 | C in mm: 50 | Weight in kg: 1,04
Heimertingen, Germany
Push screw clamp 90
Pressure direction 90° to the system bore spindle stroke approx. 70 mm 180° quick turn with ball lock in the joint with adjusting ring for height fixation use of clamping bridges possible highest power transmissi...
Heimertingen, Germany
Sliding screw clamp 45° with spindle
highest power transmission due to stable round tubes optimally suitable for clamping prism profiles but also rectangular or square profiles complete clamping mechanism exchangeable Due to optimal force effect - p...
Heimertingen, Germany
Spindle with bush and pressure plate
high quality 2-component plastic handle long threaded spindle threaded bush can be used in any system bore pressure plate exchangeable (plastic, stainless steel) suitable for pre-clamping of workpieces pressure p...
Heimertingen, Germany
Short spindle with bush and pressure plate
especially recommended when space is limited actuation via open-end wrench SW 13 direct use in system bore possible ideal for pre-clamping workpieces Pressure plate with cross prism
Heimertingen, Germany
Print and support piece
Can be replaced in a flash: without tools, without screws O-ring prevents penetration of dirt in the joint area Available in various materials exact support on the workpiece due to pendulum compensation with cros...
Heimertingen, Germany
Stop washer
Can be used as a stop or support Fixing with PS bolt or connecting sleeve infinitely adjustable by turning small space requirement
Heimertingen, Germany
Deflection bush 45° with fine scaling in 15° steps
user-friendly 360° fine scaling especially practical in combination with push rod clamps can also be used in combination with short or standard spindles with threaded bushes centre distance 50 mm
Heimertingen, Germany
Pressure plate steel double-sided
Can be replaced in a flash: without tools, without screws O-ring prevents penetration of dirt in the joint area Available in various materials exact support on the workpiece due to pendulum compensation with cros...
Heimertingen, Germany
Compensating clamping arm with short spindle for heavy workpieces
with differential compensation for distortion-free workpiece clamping Use in conjunction with multi-clamping support tower very heavy design suitable for pre-clamping heavy workpieces fast and safe clamping throu...
Heimertingen, Germany
Prism holder D16 ø 80 mm
Targeted mounting of tubular elements up to Ø 140 mm Screwed in by means of PS bolts Double prism for more possibilities Also suitable for rectangular tubes
Heimertingen, Germany
Prism holder D28 ø 58 mm
Targeted mounting of tubular elements Screwed in by means of a countersunk screw For tube diameters up to 70 mm
Heimertingen, Germany
Adjustable prism D28
Eccentric adjustment via sliding plate Flexible angle adjustment from 180 - 90 Height fixation via clamping bush Synchronous adjustment via toothing
Heimertingen, Germany
Stop bar
Combination of system bore / slotted hole - therefore many clamping options Very long and stable design, thus large contact surface for large components or large distances Infinitely adjustable via slotted hole
Heimertingen, Germany
Universal stop
larger stop range than Uni stop large three or seven system holes for bridging larger contact areas as lateral stop for large beams with fine scaling
Heimertingen, Germany