Used Welding Equipment in Bavaria, Germany

Diesel power generation systemDiesel power generation system

DIESEL POWER GENERATION SYSTEM The diesel power generation system (DSA) supplies the welding complex with alternating current. The diesel power generation system (DSA) is a fully autonomous supply source. 1. moto...

Worktop HobbyLINE (H) D28

Cost-effective alternative for low loads Table top approx. 25 mm high with system holes D28 in the grid 100 x 100 mm Accessories from all D28 system lines (PROFIEcoLINE, PROFIPlusLINE and PROFIPremiumLINE) can be...

3D measuring, assembly and straightening table

Flatness 0.1 mm/m Highest accuracy for straightening, measuring and mounting of components Optimized table outer edges Incl. fine scaling / crack lines Improved table stiffening due to additional cross ribbing DE...

Interchangeable table aperture plate D28 Okto SW 1000

Miniature welding table with grid lines diagonal grid 100 x 100 mm Use in conjunction with 3D welding tables and welding rotary tables System bores D28 All-round lateral with M8 thread e.g. for stops

Stop and clamping bracket oblong hole/long hole

dimensional adjustment possible via crack lines on 3D welding table steplessly adjustable and lockable ideal for confined spaces cast iron, hardened fine scaling on both sides

EcoLINE bolt D22 long

• Manufacturer: Lang

Connecting element for system parts Simple version without clamping area Long version connects 3 system parts or 2 system parts on the welding table. The specified loads must not be exceeded when using the clampi...

Mounting bracket

very robust stop and locking angle for workpieces and system parts direct connection of 3D welding table and foundation rail steel, hardened

PS countersunk bolt D28 long

• Manufacturer: Lang

Countersunk bolt head (no interfering edges) Only for connecting holes (no slotted holes) Clamping by means of Allen key (D28: SW 8) or torque wrench Countersunk bolts may only be used for bores, not for oblong h...

EcoLINE bolt D28 short

Connecting element for system parts Simple design without clamping area Short version connects 2 system parts or 1 system part on the welding table

PPS countersunk bolt D28 long

• Manufacturer: Lang

Specially made for DEMMELER power screwdrivers Use for simultaneous clamping of two system parts Easy, comfortable clamping due to optimized force distribution in the expansion segments Lowest sensitivity to dirt...

Spacer L-shape

table extension / table connection of several 3D welding tables third Achso for extension as clamping tower or laterally as exact table stop connection of system parts use: 4-sided approx. 25 kg per 500 mm with g...

Stop and clamping bracket Bore/long hole

Combination of system bores / slotted hole thus many clamping possibilities cast iron, hardened two full angular surfaces therefore usable from both sides dimensional adjustments via crack lines on 3D welding tab...

Stop and clamping bracket large Bore/long hole

Combination of system bores / slotted hole thus many clamping possibilities Fine scaling on both sides two full angular surfaces, thus usable from both sides dimensional adjustments via crack lines on 3D welding ...

Corner module Alu-Titanium

in high-strength aluminium-titanium alloy, thus approx. 60 % weight saving and approx. 10 % higher bending strength compared to cast iron diagonal table extension flexible use as prism, support, stop, etc. With t...

Foot for distance bracket D28 200 x 200 mm

Connecting element between U-shaped spacer bracket or 3D welding table and support and foundation rail. Different mounting heights can be adapted to the workpiece by simply exchanging the table feet Incl. 2x fitt...