Used Turret Lathes

12 meter dia Schiess Froriep CNC type Heavy

• Manufacturer: Schiess Froriep

Additional information as follows: Model #'s are 80 DV 33-750/800/1200-800/400 Table diameter: 7,500mm Table and base height: 2,150mm Table surface height above floor: 150mm Max. turning diameter by ram on cross ...

5,000mm swing HNK HCT-45T 4500x5000

Equipped with 6-Jaw Chuck Installed and Under Power for Inspection

100" dia DTI HOGGER CNC controlled Heavy Duty

Although this Double Column VTL is designed to accept two (2) 60 Tool Changers, it is currently only equipped with one. Some additional specs are as follows: Max table speed - 180rpm Cross section of the Ram - 30...

HNK NT-60/80 CNC VTL, 6,000mm table dia, 8,000mm swing,

• Manufacturer: Waldrich Siegen

Additional info: Note: The Workpiece weight of 80,000 kgs (176,000 lbs) listed above is without the use of Steadies Still installed and under power

10 A Used Jones & Lamson Saddle Type Turret Lathe

• Manufacturer: Jones & Lamson

One Used 1 A Warner & Swasey Square Head Saddle Type Turret Lathe Model ...

• Manufacturer: Warner & Swasey
• Model: 1A M3400

If you would like the machine reconditioned, the above work will be started once the PO and deposit are received. Estimated time frame 12 to 14 weeks with current workload.

Warner & Swasey Square Head 4A Model 3550 Saddle Type Turret Lathe

• Model: 4A 3550

ONE (1) USED: 4A WARNER & SWASEY LONG BED SQUARE HEAD TURRET LATHE

• Manufacturer: Warner & Swasey
• Model: 4A 3550

If you would like the machine reconditioned, the above work will be started once the PO and deposit are received. Estimated time frame eight weeks

4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe

• Manufacturer: Warner & Swasey
• Model: 4A M3550

4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe Swing Over Bed Ways 28-1/4" Swing Over Cross Slide Carriage 22" Center Distance 62" Spindle Hole 9-1/4" Spindle Speeds 20 To 526 Rpm's Spindle Nose A-...

3 A Used Warner & Swasey Square Head Saddle Type Turret Lathe

• Manufacturer: Warner & Swasey
• Model: 3A M3500

If you would like the machine reconditioned, the above work will be started once the PO and deposit are received. Estimated time frame eight weeks

4 A Used Warner & Swasey Lever Head Saddle Type Turret Lathe

• Manufacturer: Warner & Swasey
• Model: 4A

2 A Used Warner & Swasey Square Head Saddle Type Turret Lathe Model 3470...

• Manufacturer: Warner & Swasey
• Model: 2A M3470

2 A Used Warner & Swasey Square Head Saddle Type Turret Lathe Model 3470 Lot 710 Swing Over Bed Ways 20-1/2" Swing Over Cross Slide Carriage 16" Center Distance 43" Spindle Hole 3-3/4" Spindle Nose A - 11 Spindle...

5 A Used Warner & Swasey Square Head Saddle Type Turret Lathe Model 3600...

• Manufacturer: Warner & Swasey
• Model: 5A M3600

4 A Used Warner & Swasey Lever Head Saddle Type Turret Lathe Model 1500

• Manufacturer: Warner & Swasey
• Model: 4A M1500

Note: Machine Will Have Both Aprons And Rapid Traverse Boxes Reconditioned. Rapid drive unit reconditioned. New Feed And Rapid Shafts. New pin and cups in square and hex turrets. Head Stock Flushed And New Oil ...

4 A Used Warner & Swasey Lever Head Saddle Type Turret Lathe Model 1500

• Manufacturer: Warner & Swasey
• Model: 4A M1500

Note: Optional: Machine Will Have Both Aprons And Rapid Traverse Boxes Reconditioned. Rapid drive unit reconditioned. New Feed And Rapid Shafts. New pin and cups in square and hex turrets. Head Stock Flushed An...