Used Warner & Swasey Turret Lathes

WARNER & SWASEY NO. 3 TURRET LATHE. #1227224

• Manufacturer: Warner & Swasey
• Model: NO 3

Warner & Swasey 21" Turret Lathe - No.3 / M-1200

• Manufacturer: Warner & Swasey

W/parts, Compound Rest, 1 1/2" Bore, (3105#) 98x46x66, (270#) 88x55x17, *contains 2 Peices

WARNER & SWASEY 4A

• Manufacturer: Warner & Swasey
• Model: 4A

Square head w/hydraulic preselector 24" Dia KCM 3 Jaw Chuck with 7" Bore Rapid traverse both aprons Maximum swing over ways 28-1/4" Maximum swing over carriage 22-7/16" Maximum distance from spindle to turret f...

WARNER & SWASEY 1-A #1227324

• Manufacturer: Warner & Swasey
• Model: 1A

WARNER & SWASEY M1420

• Manufacturer: Warner & Swasey
• Model: M1420

NO 4 W&S TURRET LATHE WITH PRESELECT SPINDLE SPEEDS 2 SPEED MAIN MOTOR Approximate Swing Over Bed 17" Spindle Bore 2.425" 3 JAW CHUCK 4JAW CHUCK 4 WAY SQUARE TOOLPOST SPINDLE SPEEDS 30 - 1532 RPM COOLANT SYSTEM...

WARNER & SWASEY M-3580 #1107725

• Manufacturer: Warner & Swasey
• Model: M3580

WARNER & SWASEY M-1950 #0992625

• Manufacturer: Warner & Swasey
• Model: M1950

WARNER & SWASEY M-1740 #0992525

• Manufacturer: Warner & Swasey
• Model: M1740

WARNER & SWASEY M-3400 #0992725

• Manufacturer: Warner & Swasey
• Model: M3400

WARNER & SWASEY M-3400 #0992825

• Manufacturer: Warner & Swasey
• Model: M3400

Warner & Swasey 4A Square Head Saddle Type Turret Lathe w/ 9-1/2” Hole

• Manufacturer: Warner & Swasey
• Model: 4A M3580

Unit is USED and in VERY GOOD CONDITION. Unit has been powered and tested at the facility. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Pictures are of the actual unit being purchased. If the buyer has any quest...

1969 WARNER & SWASEY 1A M-3400 #0550225

• Manufacturer: Warner & Swasey
• Model: 1A M3400

LEAD ON THREADING BAR FEED 6-POSITION TURRET CARRIAGE STOP 2 ADJUSTABLE TOOL HOLDERS 4 FLANGE TOOL HOLDERS RAPID TRAVERSE COOLANT WITH CHIP PAN F

Warner & Swasey 2A Square Head Saddle Type Turret Lathe w/ 3-3/4” Hole

• Manufacturer: Warner & Swasey
• Model: 2A

Unit is USED and in VERY GOOD CONDITION. Unit has been powered and tested at the facility. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Pictures are of the actual unit being purchased. If the buyer has any quest...

WARNER & SWASEY 3A (M-3500) SQUARE HEAD #0345325

• Manufacturer: Warner & Swasey
• Model: 3A M3500

Swing over bed: 24-1/2" | Swing over carriage horn: 18" | Spindle nose to turret: 58-3/4" | Spindle hole: 6-1/8" | Spindle speeds: (32) 12 TO 851 RPM | Chuck: 21" 3 JAW | Power chuck wrench: YES | Carriage longi...

1969 2A WARNER & SWASEY Saddle Type Turret Lathe

• Manufacturer: Warner & Swasey
• Model: 2A

Size: 2A