Used Machine Tools in Rhineland-Palatinate, Germany

Expert
Base 3000 mm, with hardened guides in x-direction, 3.000 – 8.000 mm Electric device – operation via 2-hand safety control, setting mode to adjust drilling depth – key switch Drilling units with stand and linear g...
Bullay, Germany
Horizontal cross loader
Tooth belt drive with profile slide Available for following automatic cutting machines Max. load 750 KG Dimension of stories fix, e.g. max. cutting range of the saw Conveying length 1.850 mm Profile length from ...
Bullay, Germany
Inclined loading magazine
Tooth beld drive – with storages Available for following automatic cutting machines: Profilma 200, 250, 500 E Max. load 8 storages Max. square 50 x 80 mm Max. weight 3 kg / m Profile length 2.100 – 6.500 mm Pneum...
Bullay, Germany
Bundle loader
Available for following automatic cutting machines: Profilma 250, 500 E, 510 E, 600 R Top loading by crane or fork lift Max. bundle Ø 650 mm Max. load 4.000 kg Bar length 3.000 – 6.200 mm Pneumatic gripper for go...
Bullay, Germany
Heavy duty cross loader
Chain conveyor for heavy profiles Available for following automatic cutting machines Max. load 5.300 KG Dimension of stories fix, e.g. max. cutting range of the saw Conveying length 1.550 mm Profile length from 5...
Bullay, Germany
SW600
Automatic cutting line for PVC and aluminum profiles with 90° and miter cuts Machine control unit through PC and 21“ monitor Maximum raw profile length to be processed with standard version of machine is 1000-700...
Bullay, Germany
MG6 Automatic circular saws
The swarf extractor MG6 collects dust and Aluminum chips in a removable drivable 160-liter container. It has a 160 mm diameter inlet hole (without adaptor) and can be run either continuously or controlled through...
Bullay, Germany
PS 500
Linear back to front blade feed motor above the table hardened guides, power unit gear motor and ball screw spindle blade feed speed adjustable via potentiometer 0,5 – 12 m/min Table left of blade 120mm width, ta...
Bullay, Germany
PE 50 m
Our length measuring system PE 50 m offers an affordable, comfortable and easy to use alternative to the purely manual measuring of your profiles. The stop of the length measuring system can quickly be moved into...
Bullay, Germany
Profilma 620
High performance automatic circular saw for aluminum and non-ferrous metals Fully automatic operation Infinitely adjustable speed control of the saw blade engine Material and saw feeder movement through servo dri...
Bullay, Germany
Profilma 250
The high-performance automatic saw Profilma 250 is designed for cutting aluminum and non-ferrous metals to length with a particularly thin saw blade. Depending on the version, solid carbide circular saw blades Ø...
Bullay, Germany
Cutting Line KS600R
Cutting line with loading magazine and profile disposal for small parts and take-off stations for cut-off lengths up to 7,200 mm or 2 times up to 3,000 mm. Technical data: Sawing line for cut-off lengths from 10 ...
Bullay, Germany
MG3 Automatic circular saws
The MG 3 chip extractor collects dust and chips in a movable 172-litre container. It has two suction outlets (with nozzles) with a diameter of 100 mm and can be operated either in continuous operation or controll...
Bullay, Germany
GS 350
For sawing aluminum and plastic profiles. Use of Ø 350 mm saw blades. Drive 2.2 KW, 400 V, 50 Hz. Saw cut from bottom to top, pneumatic with 2 hand operation. Manual miter setting 30 ° – 90 ° – 0 °. Grid points a...
Bullay, Germany
Profilma 502
Fully automatic operation with graphic control elements. 7.5 kW drive, 400V, 50 Hz. For HM or PCD saw blades Ø550 mm, max. 2850 rpm. Servo-controlled saw feed, vertically from below. Material feed via servo-contr...
Bullay, Germany