Used Machine Tools in Rhineland-Palatinate, Germany

Primus 300PV

Horizontal end milling machine with manual feed to machine the ends of aluminium or PVC profiles use of milling disks, cutter blocks or special shaped disks, max. Ø 300 mm Pneumatic feed of cutter disk, hydrauli...

Dyno 40

Quick change tool system Hydraulic operated Foot valve operated Max. power at 260 bar = 400 KN Stroke = max. 80mm adjustable via limiter switch 20 Double strokes / min. Max. daylight = 300 mm

Dyno 20

Quick change tool system Hydraulic operated Foot valve operated Max. power at 260 bar = 200 KN Stroke = max. 80mm adjustable via limiter switch 20 Double strokes / min. Max. daylight = 300 mm

MC302 Geos – 5

5 axis CNC floor type vertical spindle machining center. 5 axis (X, Y, Z, C, A) managed by CNC. Suitable for milling, drilling, tapping and cutting on the 5 sides of aluminum, PVC, steel and light alloys profiles...

Automatic saw and 8x punching

0 – 300 mm adjustable pneumatic material feed and digital display Vertical hydraulic punching unit to the right of the saw blade Power 600 KN Punching tools according to profile shape Aluminium profile – finished...

MC305 Kosmos – 4

4 axis CNC floor-type vertical spindle machining center. 4 axis (X, Y, Z, A) managed by CNC. By means of dedicated tools it’s suitable for working on 5 sides of aluminium, PVC and steel sections. The work pieces ...

Processing line solar modules

Automatic processing line of photo voltaik frames Pressta Eisele offers a fully automatic processing line of photovoltaik frames. Cutting, punching, milling of aluminium frames in 10 seconds cycle time. 2 operato...

Dyno 9

Quick change tool system Hydropneumatic intensifier Foot valve operated Max. power at 10 bar = 90 KN Stroke = 40 mm 25 Double strokes / min. Max. daylight = 250 mm Working height 950 mm

Dyno 15

Quick change tool system Hydraulic operated Foot valve operated Max. power at 200 bar = 160 KN Stroke = max. 80 mm adjustable via limiter switch 14 Double strokes / min. Max. daylight = 250 mm

HMR 6 / 12

Base with hardened guides Hydraulic device; Motor 4,0 kW, 400 V, 50 Hz Operation panel to switch on/off single or multy head mode Foot pedal controlled C-formed stand, working range – ram to back wall 120 mm Dayl...

SW453 Reverse Garda-3

Double mitre saw with a fixed unit on the left and the other one movable. Automatic positioning of the movable unit. Electronic positioning of the cutting units on any angle within 22,5° and 135°. Realized with c...

SW453 Plug

Double mitre saw with a fixed unit on the left and the other one movable. Automatic positioning of the movable unit. Pneumatic tilting of the heads (90°, 45° or 22,5°). The intermediate degrees can be obtainedby ...

Level Master Wireless Big Daishowa 806.805

• Manufacturer: Daishowa

LEVEL MASTER Simultaneous 2-axis leveling device for the machine table. Simultaneous display of both axes by LED's. Big Daishowa 806.805

Pressta 3000

This crimper is designed for very high and heavy profiles. Up to 5 set of knifes per corner Heavy duty hydraulic crimer 3,0 KW, 400 V, 50 Hz, Crimping power 100 KN V-stop, crimping tools and V-blocks adjustable D...

PRESSTA – Line

The Frame manufacturing system PRESSTA ® – Line is designed for the optimal production flow at the corner cirmping on aluminum frames and related work transitions. The complete system consists of the following...