Used Machine Tools in Saxony, Germany

Röhm Duro-NCES 260 77/3 (37)

• Manufacturer: Röhm

Merkmale: neuwertig automatisches spannen Spannbereich außen 120mm Spannbereich innen 50mm Flanschenaufnahme innen Ø170 x 6mm

SMW Autoblock 105510 (Nr.40)

• Manufacturer: SMW Autoblock

Power chuck, automatic clamping Features: Equipped with forming jaws Clamping range min./max. 60 / 320mm Flange mounting Ø 295x5mm inside; mounting 3x holes Ø 21mm and pitch circle Ø 230mm

Forkardt KS 400 (Nr. 45)

• Manufacturer: Forkardt

Power chuck, mechanical Features: Power flange AKS 315/5 Clamping range min./max.: 60/240mm Flange mounting size Ø 300x5mm inside; fastening 3x hexagon socket screws Ø 20mm and 3x holes Ø 20.5mm / pitch circle Ø ...

WMW PS 300

• Manufacturer: WMW

technical features: - 4 jaw chuck, manual feed, clamping range: outside= max. Ø 280mm as well as inside=min. Ø 40mm

DEPO MK extension for screw-in milling cutter

• Manufacturer: Depo

MK extension for screw-in milling cutter, 3 pieces DEPO Holder: MK5 1x 10065, Item condition: New ! 1x 15065, Item condition: New ! 1x 17565, Item condition: used ! 2x new, 1x used, tested !

PAGUS pipe vice

• Manufacturer: Pagus

Pipe vice, round material vice PAGUS used, checked ! upper jaw holder broken !

ALLMATIC NC high-pressure clamps

• Manufacturer: ALLMATIC

NC high-pressure clamp with hydraulic spindle ALLMATIC - NC LC125 including one set of stepped jaws ! used, tested !

WMW AW 1100x1000x610

• Manufacturer: WMW

Drill cube material made of cast steel. Bohrwürfel Material aus Stahlguss. T-Nuten nach DIN 650m - Spannfläche vertikal: LxT: 1000 x 610mm - Spannfläche horizontal: LxB: 1000 x 1100mm

METAKON drilling machine

• Manufacturer: METAKON

Valve hole drilling machine METAKON VM-01 Machine was used for drilling valve holes in motorcycle rims. retract, drill, advance with laser pointer ! 380 V Documents available. used, tested ! Video:

BOSCH tin snips

• Manufacturer: Bosch

Sheet metal shears, high-frequency sheet metal shears, high-frequency tools, high-frequency machines BOSCH EW/HEP 64A4Z1 0.1 / 0.12 KW 2075 / 2775 strokes/min 200 / 265 V 3AC 150 / 200 Hz approx. 3.5 m connection...

Tool milling machine TOS FN 20

• Manufacturer: TOS

Table size [mm]: 600 x 240 Tool holder: SK 40 Speed range [1/min]: 50 - 2500 Travel [X / Y / Z mm]: 300 / 200 / 350 Equipment / accessories: Vertical head with quill, counter bearing

Stimin FUS 32 tool milling machine

Table size [mm]: 950 x 450 Tool holder: SK 40 Speed range [1/min]: 25 - 2000 Equipment / accessories: Digital display Sony in 3 axes, milling head can be swiveled down with manual quill, counter bearing, coolant ...

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 130 x 3 ( DH315x3 ) TGL 30-2333 Thread: M18 x 1.5, length: 20 mm ( left-hand thread ) bore: Ø 30 mm, depth: 55 mm used, tested !

ROTO RECORD 3-jaw chuck

3-jaw chuck, three-jaw chuck ROTO RECORD, WMW DH 315 x 3 ( DH315x3 ) TGL 30-2333 3x threaded hole: M12 x 1.75, depth: 30 mm used, tested !

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 250 x 3 ( DH250x3 ) TGL 30-2333 centering Ø: 139 / 135 mm, depth: 19 mm ( conical ) used, tested !