Used Machine Tools in Saxony, Germany

WMW clamping drive

• Manufacturer: WMW

Clamping drive, electric clamping force generator WMW EDU I80 TGL 0-5471 Torque adjustable in 8 steps from 20 - 120 Nm 80 rpm 220 / 380 V 0.55 kW for further clamping drives see MMZ158, MMZ739 ! New ! Customers w...

PAGUS Bezel

• Manufacturer: Pagus

Bezel, lunette, setting stick, fixed PAGUS without counter pressure plate ! used, tested !

HOFFMANN coolant dispersion

• Manufacturer: Hoffmann

Coolant expansion, coolant filter, suction belt filter HOFFMANN HSF 200 E 220 / 380 V used, tested !

AS TECH Hydraulic nut

• Manufacturer: AS TECH

Hydraulic nut AS TECH HWS16111131 7550.04 KG4 158 kN 700 bar used, tested !

HOFFMANN cooling unit

• Manufacturer: Hoffmann

Cooling unit for coolant HOFFMANN ERK 210-V Connected load 11 kW 380 V used, tested !

FILTER TECHNOLOGY GERA Coolant system

• Manufacturer: FILTER TECHNOLOGY GERA

Coolant system FILTER TECHNOLOGY GERA Coolant system incomplete ( drive for the belts is missing (picture 2) ) with 4 Brinkmann pumps TBR63/270 (2 times) TB303/370-T TB250/350 New !

AMK chip conveyor

Chip conveyors, hinged plate belt chip conveyors AMK AUTOMATION Type 1100 x 430 Drive motor: 0.25 kW 230 / 400 V 3AC Coolant pump: SCHMALENBERGER SM 32-13/2 Pump motor: ATB AF 90L/2M-12L+E2 2,2 kW 2840 rpm 230 / ...

BOSCH tin snips

• Manufacturer: Bosch

Sheet metal shears, high-frequency sheet metal shears, high-frequency tools, high-frequency machines BOSCH EW/HEP 64A4Z1 0.1 / 0.12 KW 2075 / 2775 strokes/min 200 / 265 V 3AC 150 / 200 Hz approx. 3.5 m connection...

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 130 x 3 ( DH315x3 ) TGL 30-2333 Thread: M18 x 1.5, length: 20 mm ( left-hand thread ) bore: Ø 30 mm, depth: 55 mm used, tested !

GESAU Drill

• Manufacturer: Pagus

Step drill with internal cooling GESAU ( Ø14,5x23,5/120°x25x110 ) with internal cooling ! New !

ROTO RECORD 3-jaw chuck

3-jaw chuck, three-jaw chuck ROTO RECORD, WMW DH 315 x 3 ( DH315x3 ) TGL 30-2333 3x threaded hole: M12 x 1.75, depth: 30 mm used, tested !

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 250 x 3 ( DH250x3 ) TGL 30-2333 centering Ø: 139 / 135 mm, depth: 19 mm ( conical ) used, tested !

TOS 3-jaw chuck

• Manufacturer: TOS

3-jaw chuck, three-jaw chuck TOS 100/3-1-M1 New ! N: max. 5300 rpm | Outside ø: 100 mm | Centering ø: 80 mm | Hole circle ø (chuck): 90 mm | Bore ø: 23 mm | Height with jaws: 69 mm | Dimensions ( lathe chuck ): 1...

ROTO RECORD 3-jaw chuck

3-jaw chuck, three-jaw chuck ROTO RECORD, WMW DH 200 x 3-III ( DH200x3-III ) TGL 30-2333 New !

ROTO RECORD 4-jaw chuck

4-jaw chuck, four-jaw chuck ROTO RECORD, WMW DH 315 x 4 ( DH315x4 ) TGL 30-2333 with chuck key used, tested !