Used Machine Tools in Saxony, Germany

WMW hydraulic cylinders

• Manufacturer: WMW

Hydraulic cylinder, single-acting, spring return WMW Hydraulic cylinder for UPW 63 Spare part for WMW UPW 63 ! New !

WMW clamping drive

• Manufacturer: WMW

Clamping drive, clamping force generator, electric WMW EDU I80 M1 Motor: KMR 71 G 4 F 0.75 kW 1380 rpm 220 / 380 V 3AC used, tested !

PAGUS Bezel

• Manufacturer: Pagus

Bezel, lunette, setting stick, fixed PAGUS used, tested !

WMW clamping drive

• Manufacturer: WMW

Clamping drive, clamping force generator, electric WMW EDU I160 Motor: KMR 71 K 2 E 0.75 kW 2800 rpm 220 / 380 V 3AC Mounting ring: Diameter ( inside / outside ): Ø 137.8 / 160 mm, width: 67 mm internal thread: M...

POREBA top slide

• Manufacturer: Poreba

Top slide with 4-fold steel holder POREBA 4-fold steel holder, 2 pieces used, tested !

WMW clamping drive

• Manufacturer: WMW

Clamping drive, clamping force generator, electric WMW EDU I160 Torque adjustable in 8 steps max. 110 Nm 160 rpm 220 / 380 V 3AC 0.75 kW Splined shaft profile according to TGL 0-5471 for further clamping drives s...

POREBA Luenette

• Manufacturer: Poreba

Luenette, bezel, setting stick POREBA suitable for Poreba TPK-80 ! used, tested !

PAGUS Luenette

• Manufacturer: Pagus

Luenette, bezel, steady rest, fixed PAGUS used, tested !

SILISTRA chip conveyor

• Manufacturer: Silistra

Chip conveyors, hinged apron conveyors Chip conveyors, hinged belt conveyors SILISTRA TC 280 x 900 ( TC280x900 ) 220 / 380 V used, tested !

WMW SP 5040x2230x460

• Manufacturer: WMW

Machine table can be used as clamping plate. - material - cast steel - clamping surface 4100 x 2230mm - outlet part lateral (at the side) = W: 2110 x L: 1040mm T-slots according to DIN 650 - b=54.0; c=21.0; h=55....

METAKON drilling machine

• Manufacturer: METAKON

Valve hole drilling machine METAKON VM-01 Machine was used for drilling valve holes in motorcycle rims. retract, drill, advance with laser pointer ! 380 V Documents available. used, tested ! Video:

bolster plate AP 2500x1250x100 (Nr.1-2)

Cast steel The plates are machined before the T-slot with 75mmx60mm(recessed) Table surface 2530mm X 1245 mm Longitudinal slot: Number: 5 Size:a=32, h=53, b=54, c=23mm Center distance 250mm 2 slots Chamfered 8 th...

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 200 x 3 ( DH200x3 ) TGL 30-2333 centering Ø: 107 / 103 mm, depth: 17 mm ( conical ) used, tested !

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW, ROTO RECORD DH 250 x 3 ( DH250x3 ) TGL 30-2332 used, tested !

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 250 x 3 ( DH250x3 ) TGL 30-2333 used, tested !