Used Machine Tools in Saxony, Germany

Tool milling machine TOS FN 20

• Manufacturer: TOS

Table size [mm]: 600 x 240 Tool holder: SK 40 Speed range [1/min]: 50 - 2500 Travel [X / Y / Z mm]: 300 / 200 / 350 Equipment / accessories: Vertical head with quill, counter bearing

Stimin FUS 32 tool milling machine

Table size [mm]: 950 x 450 Tool holder: SK 40 Speed range [1/min]: 25 - 2000 Equipment / accessories: Digital display Sony in 3 axes, milling head can be swiveled down with manual quill, counter bearing, coolant ...

1999 TOS- TRENCIN FNG

• Manufacturer: TOS

Angular table - machine table- machine clamping table for milling machine TOS such as FNG or FNGJ The frame is swiveable via hand wheel 360° (scale 360°) T-slots according to DIN 650 and 508 a=14mm; h=24mm; b=25m...

EURO CIPEL Micro Drill

• Manufacturer: EURO CIPEL S.A.

Micro drills, head drills, drill bits, 35 pieces EURO CIPEL S.A. 0/D3500/L120 /HP01/T526/O /FA 906310/025/ Other quantities on request ! New !

WMW SP 5040x2230x460

• Manufacturer: WMW

Machine table can be used as clamping plate. - material - cast steel - clamping surface 4100 x 2230mm - outlet part lateral (at the side) = W: 2110 x L: 1040mm T-slots according to DIN 650 - b=54.0; c=21.0; h=55....

bolster plate AP 2500x1250x100 (Nr.1-2)

Cast steel The plates are machined before the T-slot with 75mmx60mm(recessed) Table surface 2530mm X 1245 mm Longitudinal slot: Number: 5 Size:a=32, h=53, b=54, c=23mm Center distance 250mm 2 slots Chamfered 8 th...

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 200 x 3 ( DH200x3 ) TGL 30-2333 centering Ø: 107 / 103 mm, depth: 17 mm ( conical ) used, tested !

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW, ROTO RECORD DH 250 x 3 ( DH250x3 ) TGL 30-2332 used, tested !

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 250 x 3 ( DH250x3 ) TGL 30-2333 used, tested !

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chucks, three-jaw chucks, power chucks, wedge hook chucks WMW ( DKRDA250x3 ) Jaws individually adjustable by toothing ! with accessories ! used, tested !

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck, power chuck, wedge hook chuck WMW Jaws individually adjustable by toothing ! without jaws ! used, tested !

RÖHM 2-jaw chuck

• Manufacturer: Röhm

2-jaw chuck, two-jaw chuck, power chuck, wedge hook chuck RÖHM KFD-160/2 Jaws individually adjustable by toothing ! used, tested !

ALLMATIC basic B 160

• Manufacturer: ALLMATIC

Type of control: other | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 1 | Jaw width: 160 mm | Weight of the machine approx.: 13,5 kg | Space requirements of the machine approx.: m | Spa...

WMW AW 1020x810

• Manufacturer: WMW

Drill cube material made of cast steel. Surface with strong drill inclusions. T-slots according to DIN 650 - Vertical clamping surface: LxD: 1020 x 625mm - Horizontal clamping surface: LxW: 1020 x 810mm

HOFFMAN LK 630 - G 17

• Manufacturer: Hoffmann

Face Chuck - 3-Jaw chuck Type of control: conventional | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 1 | Diameter: 630 mm | Weight of the machine approx.: ca. 275 kg | Transport dimensi...