Used Agitators, Blenders, Mixers in Germany

2700 liter stainless steel 304 agitator tank with blades agitator

Volume: 2.700 liter | Lower bottom: flat bottom with slope | Upper bottom: open with loose cover | Stand type: legs | Quantity legs: 3 Piece | Diameter inside: 1.340 mm | Cylindrical height: 1.950 mm | Total hei...

10000 liter insulated agitator tank, Aisi 304 with blades agitator

• Manufacturer: Thrun Maschinen- und Behälterbau

remarks: Smaller dents in the upper bottom and insulation jacket

2500 liter stainless steel 316 agitator tank with propeller agitator

• Manufacturer: GIG GRILL & GROSSMANN

remarks: Manhole diameter approx. 460 mm; outlet probably DN 50 reduced to approx. 15 mm by flanged fitting; 2 dip pipes inside the tank

500 liter agitator tank, Aisi 316 with inclined blade agitator

• Manufacturer: Holvrieka

remarks: Outlet with bead and 2 connections, inner diameter approx. 60 mm; 3 plastic base plates; slight metallic discoloration inside

14000 liter insulated agitator tank, Aisi 304 with blades agitator

remarks: Insulation around the upper bottom and cylinder, not the lower bottom; spray ball connection slightly bent and weld seam in the upper bottom torn (see pictures); outlet diameter pipe inside approx. 50 mm...

5000 liter heat-/coolable agitator tank, Aisi 304 with blades agitator

• Manufacturer: Diessel

Temperature control cylinder (dj): half-coil temperature control bottom (dj): thermoplate notice: bump at the insulation jacket, scratches inside, Functionality of the double jacket not checked remarks: Sheet met...

3500 liter heat-/coolable agitator tank, Aisi 304 with blades agitator

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket notice: some residues of previous content, bump at the insulation jacket remarks: Smaller dents on feet and outlet; ...

630 liter insulated agitator tank, Aisi 304 with propeller agitator

remarks: Double jacket made of mild steel for heating / cooling; according to the previous operator, it was used until the end (no guarantee for functionality of the double jacket); 1 stronger dent as well as sma...

3800 liter insulated agitator tank, Aisi 316 with 2 agitators

remarks: 3-legged frame, stainless steel with load cells (no guarantee on the functionality of the load cells)

1000 Liter insulated agitator tank, Aisi 316 with blades agitator

• Manufacturer: Thrun Maschinen- und Behälterbau

max. allowable working temperature: 90 °C remarks: Diameter manhole approx. 420 mm; Insulation around the cylinder (small dents in the insulation jacket)

15000 liter insulated agitator tank, Aisi 304 with propeller agitator

remarks: Rechtecköffnung ca. 1000 x 1000 mm im Oberboden; leichter Korrsosionsansatz innen und außen

261 liter stainless steel 316 agitator tank with propeller agitator

• Manufacturer: Heinrich Nowak

remarks: Diameter of hand hole approx. 150 mm; 2 of the feet are shorter than the other two feet (see photos; take this into account when setting up the vessel) EX-proof: motor is ex-proof (compliance with the ne...

11030 liter pharmacy agitator tank, Aisi 316 with inclined blade agitator

• Manufacturer: GROSS Behälter- und Anlagenbau GmbH

max. allowable working temperature: 80 °C Technical documentation: drawing,various documents ,certificate of inspection,operation manual remarks: Manhole diameter approx. 510 mm; outlet slightly damaged EX-proof:...

1300 liter heat-/coolable agitator tank, Aisi 316 with anchor agitator

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket remarks: Double jacket around half of the cylinder height; 4 support brackets, Aisi 304 (parts of the brackets were ...

Agitator tank 0.9 cbm, insulated, double jacket

• Manufacturer: Sielmann

Content: 0,9 cbm | Material: stainless steel | Material specification: 1.4401/1.4404 | I. diameter: 1100 mm | Diameter: 1274 mm | Cyl. height: 750 mm | Height agitator: 900 mm | Upper floor: 233 mm | Lower floor...