Used Agitators, Blenders, Mixers in Germany

THOUET agitator tank - type RW-3000, with a capacity of approx. 3,000 kg.

• Manufacturer: Thouet

The tank is double-walled for heating in mild steel. The hot water is provided by the installed screw-in heaters. Useful capacity: approx. 3,000 kg

Agitator tank 6.5 cbm, half pipe coil

• Manufacturer: Sielmann

Design: Cylinder suspended on 4 supports with dished ends. Inclined blade agitator mounted from the top center - without motor or gearbox - with baffle. External half-pipe coils around the cylinder and lower end....

5000 liter heat-/coolable agitator tank, Aisi 316 with 2 agitators

max. allowable working overpressure (dj): 4.0 bar Temperature control cylinder (dj): half-coil remarks: Heating coil outside around the lower cylinder area; 3 of the feet are equipped with load cells (no guarante...

2700 liter stainless steel 304 agitator tank with blades agitator

Volume: 2.700 liter | Lower bottom: flat bottom with slope | Upper bottom: open with loose cover | Stand type: legs | Quantity legs: 3 Piece | Diameter inside: 1.340 mm | Cylindrical height: 1.950 mm | Total hei...

10000 liter insulated agitator tank, Aisi 304 with blades agitator

• Manufacturer: Thrun Maschinen- und Behälterbau

remarks: Smaller dents in the upper bottom and insulation jacket

2500 liter stainless steel 316 agitator tank with propeller agitator

• Manufacturer: GIG GRILL & GROSSMANN

remarks: Manhole diameter approx. 460 mm; outlet probably DN 50 reduced to approx. 15 mm by flanged fitting; 2 dip pipes inside the tank

500 liter agitator tank, Aisi 316 with inclined blade agitator

• Manufacturer: Holvrieka

remarks: Outlet with bead and 2 connections, inner diameter approx. 60 mm; 3 plastic base plates; slight metallic discoloration inside

14000 liter insulated agitator tank, Aisi 304 with blades agitator

remarks: Insulation around the upper bottom and cylinder, not the lower bottom; spray ball connection slightly bent and weld seam in the upper bottom torn (see pictures); outlet diameter pipe inside approx. 50 mm...

5870 liter isolated agitator tank, Aisi 304 with blade agitator

Volume: 5.870 liter | Stand type: legs height adjustable | Quantity legs: 6 Piece | Insulation: available | Insulating jacket: welded | Insulation material: PU - foam | Total height: 2.000 mm | Total width: 2.02...

2900 liter insulated agitator tank, Aisi 304 with anchor agitator

Volume: 2.900 liter | Stand type: legs height adjustable | Quantity legs: 3 Piece | Insulation: available | Insulating jacket: hermetically welded | Insulation material: stone wool | Diameter inside: 1.800 mm | ...

16.000 liter agitator tank, AISI 304 with blades agitator

notice: some residues of previous content, bump at the cylinder

30000 liter insulated agitator tank, Aisi 304 with blades agitator

• Manufacturer: TUCHENHAGEN

max. allowable working temperature: 80 °C notice: bump at the insulation jacket, manhole cover is missing, pipe end cut flush remarks: Manhole approx. 345 x 445 mm; height-adjustable screws of the feet are missing

4000 liter insulated agitator tank, Aisi 304 with anchor agitator

remarks: Tank blasted and primed on the outside; Manhole diameter approx. 510 mm; 5 round connections in the lower bottom; 1 strong dent in the insulation jacket; former connections in the upper bottom cut off (s...

4000 liter insulated agitator tank, Aisi 304 with anchor agitator

max. allowable working temperature: 120 °C remarks: Manhole diameter approx. 510 mm; 4 round openings and 1 further small opening in the lower bottom; the seam of the insulation jacket was slightly loose in one p...

1080 liter stainless steel 316 agitator tank with beam agitator

• Manufacturer: Diessel

max. allowable working temperature: 100 °C remarks: Cone height approx. 520 mm; spout with flange-mounted reduction fitting (reduced to 25 mm; end piece probably made of brass)