Used Agitators, Blenders, Mixers in Bremen, Germany

10589 liter heat-/coolable agitator tank, Aisi 304 with blades agitator

• Manufacturer: Thrun Maschinen- und Behälterbau

max. allowable working overpressure (dj): 3.0 bar Temperature control cylinder (dj): half-coil temperature control bottom (dj): double jacket technical equipment: level indicator (without guarantee), spray ball, ...

550 liter heat-/coolable agitator tank, Aisi 304 with propeller agitator

• Manufacturer: Alfa-Laval

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket material temperatur control system: AISI 304 (V2A) 1.4301

13500 liter heat-/coolable agitator tank, Aisi 304 with propeller agitator

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket notice: some residues of previous content, bump at the insulation jacket, Functionality of the double jacket not che...

5000 liter heat-/coolable agitator tank, Aisi 316 with 2 agitators

max. allowable working temperature: 100 °C max. allowable working overpressure (dj): 5.0 bar max. allowable working temperature (dj): 100 °C Temperature control cylinder (dj): half-coil

1700 liter heat-/coolable agitator tank, Aisi 304 with inclined blade agitator

max. allowable working overpressure (dj): 2.5 bar max. allowable working temperature (dj): 150 °C Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket remarks: Operating...

630 liter insulated agitator tank, Aisi 304 with propeller agitator

remarks: Double jacket made of mild steel for heating / cooling; according to the previous operator, it was used until the end (no guarantee for functionality of the double jacket); 1 stronger dent as well as sma...

3800 liter insulated agitator tank, Aisi 316 with 2 agitators

remarks: 3-legged frame, stainless steel with load cells (no guarantee on the functionality of the load cells)

1000 Liter insulated agitator tank, Aisi 316 with blades agitator

• Manufacturer: Thrun Maschinen- und Behälterbau

max. allowable working temperature: 90 °C remarks: Diameter manhole approx. 420 mm; Insulation around the cylinder (small dents in the insulation jacket)

15000 liter insulated agitator tank, Aisi 304 with propeller agitator

remarks: Rechtecköffnung ca. 1000 x 1000 mm im Oberboden; leichter Korrsosionsansatz innen und außen

261 liter stainless steel 316 agitator tank with propeller agitator

• Manufacturer: Heinrich Nowak

remarks: Diameter of hand hole approx. 150 mm; 2 of the feet are shorter than the other two feet (see photos; take this into account when setting up the vessel) EX-proof: motor is ex-proof (compliance with the ne...

Agitator tank 6.5 cbm, half pipe coil

• Manufacturer: Sielmann

Design: Cylinder suspended on 4 supports with dished ends. Inclined blade agitator mounted from the top center - without motor or gearbox - with baffle. External half-pipe coils around the cylinder and lower end....

11030 liter pharmacy agitator tank, Aisi 316 with inclined blade agitator

• Manufacturer: GROSS Behälter- und Anlagenbau GmbH

max. allowable working temperature: 80 °C Technical documentation: drawing,various documents ,certificate of inspection,operation manual remarks: Manhole diameter approx. 510 mm; outlet slightly damaged EX-proof:...

5870 liter isolated agitator tank, Aisi 304 with blade agitator

Volume: 5.870 liter | Stand type: legs height adjustable | Quantity legs: 6 Piece | Insulation: available | Insulating jacket: welded | Insulation material: PU - foam | Total height: 2.000 mm | Total width: 2.02...

2900 liter insulated agitator tank, Aisi 304 with anchor agitator

Volume: 2.900 liter | Stand type: legs height adjustable | Quantity legs: 3 Piece | Insulation: available | Insulating jacket: hermetically welded | Insulation material: stone wool | Diameter inside: 1.800 mm | ...

16.000 liter agitator tank, AISI 304 with blades agitator

notice: some residues of previous content, bump at the cylinder